Skip to lesson content

Lesson 6 of 13

Ray Optics and Optical Instruments · Lesson 6 of 13

Thin Lenses, Lensmaker’s Equation and Power

“Build a thin lens from two spherical interfaces and explain why curvature and surrounding medium control its power.”

Learning Objectives

• Derive lensmaker’s and thin-lens equations by combining two interfaces. • Assign the signs of both lens radii. • Calculate optical power in dioptres. • Predict the effect of immersion and index matching.

Two surfaces act as one optical system

A lens is a transparent body bounded by two surfaces, with at least one curved surface in the spherical-lens model. A double-convex lens is thicker at its centre; a double-concave lens is thinner. Shape alone does not guarantee convergence or divergence. What matters is the lens index relative to the surrounding medium. Ordinary glass in air makes a convex lens converge; the same shape in a medium with a higher index than the glass can diverge.

For a thin lens, thickness is small compared with relevant radii and object and image distances. Treat the two surface vertices as coincident at optical centre O. The same outside medium of index n_m is on both sides, and the lens has index n_l. Let R₁ and R₂ be signed centre coordinates for the first and second surfaces, taking incoming light from left. A double-convex lens then has R₁ > 0 and R₂ < 0. The optical centre is a first-order thin-lens reference, not a point at which light avoids all physical refraction inside a thick real lens.

Signed radii of a double-convex thin lensprincipal axisC₂C₁lens n_l; outside n_mR₁ > 0R₂ < 0optical centre OThe first surface centre C₁ is to the right; the second centre C₂ is to the left.
Lens radii and their signs— Thin-lens reference geometry; centres determine signed radii.

Eliminate the intermediate image

Let surface 1 alone form an image at signed distance v₁. Apply the spherical-interface relation to air or medium entering the lens. At surface 2, incoming rays are directed toward that intermediate image if it lies beyond the surface. It is therefore a virtual object for surface 2: u₂ ≈ v₁ in the thin limit. Light does not need to reach the intermediate image before the second refraction. Apply the same incoming positive axis to both transmissions, but exchange the media at the second surface.

First and second surface equationsLaTeX
The cancellation of v₁ uses negligible lens thickness. A thick lens needs the actual separation and different reference planes.

Add the two equations. The intermediate terms cancel, leaving n_m(1/v − 1/u) = (n_l − n_m)(1/R₁ − 1/R₂). Divide by n_m. With the object infinitely far away, 1/u tends to zero and the outgoing image distance becomes the signed focal length f. This identifies the curvature-and-index expression as 1/f. The resulting thin-lens equation then applies to a finite object. There is no minus sign to guess from the lens shape: the relative index and signed radii determine it.

Lensmaker’s equationLaTeX
The lens is thin, paraxial and surrounded on both sides by the same medium. A plane surface contributes zero reciprocal curvature.
Thin-lens imaging equationLaTeX
u and v are coordinates from the optical centre. For the ordinary converging lens in air f > 0; for a diverging lens f < 0.
Manufacturing a symmetric lens

Problem
A glass lens has index 1.55 in air and must have f = +20 cm. Its two convex faces have equal radius magnitudes. Find the radius.

  1. 1.Set R₁ = +R and R₂ = −R. Lensmaker gives 1/f = (1.55 − 1)(2/R) = 1.10/R.
  2. 2.Therefore R = 1.10f = 22 cm. The two signed radii are +22 cm and −22 cm.
  3. 3.Check: a larger radius would flatten the lens and increase its focal length, consistent with weaker curvature.

Power measures angular bending

For a parallel paraxial ray striking at height y, a converging thin lens makes it travel toward the axial focus. Its outgoing slope is approximately −y/f. Thus a shorter positive focal length gives a greater inward change of slope for a fixed height. Optical power is defined as P = 1/f with f in metres. One dioptre, symbol D, is one inverse metre. Power is not an energy rate measured in watts; here it describes convergence or divergence.

Optical powerLaTeX
P has unit m⁻¹, commonly called dioptre (D). A +0.40 m lens has +2.5 D; a −0.25 m lens has −4.0 D.

Immersing a lens changes its action

The same lens in water

Problem
A glass lens of index 1.50 has focal length +20 cm in air. Find its focal length in water of index 1.33.

  1. 1.Its shape factor K = 1/R₁ − 1/R₂ is fixed. In air, 1/20 = (1.50 − 1)K, giving K = 0.10 cm⁻¹.
  2. 2.In water, 1/f_w = (1.50/1.33 − 1)(0.10) = 0.012782 cm⁻¹, so f_w = +78.24 cm.
  3. 3.It still converges, but much less strongly because the relative index contrast is smaller. Using n_l − 1 underwater would incorrectly leave its focal length unchanged.

If n_l = n_m, lensmaker gives zero power and infinite focal length: the curved boundary no longer bends the ray. A clean transparent lens can become difficult to see in an index-matched liquid because both refraction and interface reflection are suppressed; absorption, scratches and imperfect matching can still reveal it. Water does not match a glass lens of index 1.47. If n_m exceeds n_l, the factor changes sign and the same convex shape can become diverging. The two axial focal points of a thin lens in equal outside media have equal distance magnitudes, but their roles are specified by whether incoming or outgoing rays are parallel.

Model limitations are useful predictions

The thin-lens equation describes first-order geometry. Finite thickness shifts the appropriate reference planes. Wide apertures introduce spherical aberration, and different wavelength indices introduce chromatic aberration even in lenses that are geometrically thin. A thicker lens is not the fundamental cause of colour separation: dispersion is. Optical designers combine materials and curvatures to control such errors; adding components without designing them does not automatically sharpen an image.

Quick Quiz

Quiz

Quick check

A biconvex glass lens in air normally has radii signs

Explanation: The first centre is to the right of its vertex; the second is to the left.

Quick check

A focal length of −50 cm corresponds to power

Explanation: Convert −50 cm to −0.50 m before taking the reciprocal.

Quick check

An index-matched lens has

Explanation: The relative-index factor in lensmaker’s equation vanishes.

Quick check

Immersing ordinary glass in water generally makes its positive focal length

Explanation: The relative contrast decreases while remaining positive.

Quick check

The thin-lens equation assumes

Explanation: The two interface reference points are treated as coincident.

Practice Problems

Practice Problems
  1. A biconvex lens in air has R₁ = +10 cm, R₂ = −15 cm and f = +12 cm. Find its index.
  2. Find the focal length and nature of a −4.0 D lens.
  3. A plano-convex glass lens has n = 1.50, first curved surface R₁ = +15 cm and second plane surface. Find f in air.
  4. Predict the action of a symmetric convex lens of index 1.40 placed in liquid of index 1.60.
  5. Explain how the intermediate image disappears from the thin-lens derivation without being physically ignored.

1/12 = (n − 1)(1/10 + 1/15) = (n − 1)/6. Therefore n − 1 = 1/2 and n = 1.50. Signed radii make the two positive curvature contributions add.

Key Takeaways

Key Takeaways

• A lens acts through two refractions. • Lensmaker’s equation combines curvature and relative refractive index. • A biconvex lens in air has R₁ > 0 and R₂ < 0 for left-to-right light. • Thin-lens imaging uses 1/v − 1/u = 1/f. • Optical power is reciprocal focal length in metres. • Index matching removes first-order lens power. • Immersion can weaken or reverse the action of a lens.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…