Skip to lesson content

Lesson 10 of 13

Ray Optics and Optical Instruments · Lesson 10 of 13

Simple Magnifiers and Angular Size

“Explain what a magnifying glass enlarges, derive both viewing adjustments and separate linear from angular magnification.”

Learning Objectives

• Define magnifying power against a clear unaided reference. • Derive relaxed-eye and near-point magnification. • Distinguish finite image size from angular size. • Predict the effects of eye position and image distance on comfortable viewing.

Seeing detail means seeing an angle

A small printed feature looks larger when brought closer because it subtends a larger angle at the eye. But the eye cannot keep an arbitrarily close object in focus. The near point is the closest distance of clear vision for that eye; use a conventional D = 25 cm for a normal reference eye, while recognising that age and individual accommodation change it. A magnifier lets the actual object sit closer than D while presenting a virtual image at D or farther away. The eye then forms a real image on its retina.

Define angular magnification M as the angle subtended by the image seen through the instrument divided by the angle subtended by the same object viewed unaided at the near-point reference D. For object height h and small angles, the reference angle α ≈ h/D. This reference matters: at a fixed position a thin lens centre ray makes the object and its virtual image subtend the same angle at O, but that angle is larger than the unaided angle from distance D. There is no contradiction.

Relaxed viewing: image at infinity

Place the object in the front focal plane of a converging lens. Rays from a given point emerge parallel, and a relaxed eye can focus them. The chief ray from the object tip through O has slope magnitude h/f, so β ≈ h/f. Dividing by h/D gives M∞ = D/f. The image-at-infinity description concerns ray directions; no finite image height or finite linear magnification can be assigned at an infinitely remote image plane.

Angular magnification for a relaxed eyeLaTeX
Small-angle model of a simple converging magnifier. f and D use the same unit; M is dimensionless.
A simple magnifier with relaxed-eye viewingprincipal axisobjectF₁F₂parallel outputObject at u = −f. Outgoing slopes from one point are equal.
Magnification with the object in the focal plane— Two rays from the tip emerge parallel. Their finite inclination sets angular size; there is no finite final image plane.

Maximum accommodation: image at the near point

Hold the eye close enough to the thin lens that its distance can be neglected. For the final virtual image at the eye’s near point use v = −D. The lens equation gives −1/D − 1/u = 1/f, so u = −fD/(D + f). The object lies inside the focus. Its positive linear magnification is m = v/u = 1 + D/f. At this adjustment the image height hᵢ is viewed from D, so β ≈ hᵢ/D. Relative to α ≈ h/D, angular magnification also equals hᵢ/h. Their equality is a feature of this geometry, not a general identity between linear and angular magnification.

Near-point adjustment, eye close to lensLaTeX
The virtual image is at v = −D. Accommodation is required; relaxed viewing gives one less unit of angular magnification.
A 5 cm focal-length magnifier

Problem
Compare both adjustments for D = 25 cm and f = 5 cm.

  1. 1.Relaxed-eye viewing puts u = −5 cm and gives M∞ = 25/5 = 5.
  2. 2.Near-point viewing gives u = −(5 × 25)/(25 + 5) = −4.167 cm and M_D = 1 + 25/5 = 6.
  3. 3.Moving the object only 0.833 cm toward the lens changes the final image from infinity to the near point. A small placement change can therefore demand substantial refocusing by the eye.

A finite virtual image can still be too close

Image area and clear vision

Problem
A magnifier of f = 9 cm views 1 mm² squares. Require a finite virtual image area of 6.25 mm². Locate object and image and assess viewing with the eye at the lens.

  1. 1.Linear lengths scale by m = √6.25 = 2.5, not by 6.25. For a virtual upright image, m = 1 − v/f, so v = f(1 − m) = −13.5 cm.
  2. 2.u = v/m = −5.4 cm. The virtual image lies only 13.5 cm from an eye close to the lens.
  3. 3.An eye with D = 25 cm cannot accommodate that closely. A large geometrical image is not sufficient for clear vision. With the object exactly 9 cm before this lens, the image would instead be at infinity; then finite image area would be undefined while angular power would be 25/9 = 2.78.

Eye relief and useful magnification

Let the eye be a distance a behind the lens and the virtual image a finite distance V before it. For a fixed object and fixed lens, image height is fixed but the angle at the eye is approximately hᵢ/(V + a). Moving the eye backward reduces this angle and usually reduces the visible field. For an image at infinity the emerging rays from one point remain parallel, so their angle is essentially independent of modest eye displacement within the admitted bundle; the field can still shrink. To place a finite virtual image at the eye’s near point, use V = D − a. Then the corresponding angular power is 1 + (D − a)/f. The familiar near-point formula assumes a ≈ 0.

A very short focal length increases predicted angular power but introduces practical constraints: very small working distance, restricted field, illumination difficulty and aberrations. Diffraction and the optical aperture also limit resolved detail. Enlarging a blurred patch does not reveal unlimited new information. A compound microscope separates the tasks of making a real enlarged intermediate image and viewing it comfortably, which enables greater useful magnification than a single simple lens.

Quick Quiz

Quiz

Quick check

The standard unaided reference for a simple magnifier is

Explanation: Angular power compares with the closest conventional unaided clear view.

Quick check

For relaxed-eye magnification, the object is

Explanation: Emerging rays from each point are parallel.

Quick check

For f = 5 cm and D = 25 cm, M_D is

Explanation: M_D = 1 + D/f = 6.

Quick check

If image area is 9 times object area, positive linear magnification is

Explanation: Area magnification is m².

Quick check

A virtual image 12 cm from an eye with near point 25 cm is

Explanation: The apparent object distance for the eye must not be shorter than its near point.

Practice Problems

Practice Problems
  1. Find the angular powers of a +10 cm magnifier for D = 25 cm in the two standard adjustments.
  2. For f = 9 cm and D = 25 cm, locate the object for maximum near-point angular power.
  3. An object lies exactly at the focus of a +9 cm magnifier. Can a finite image area be given?
  4. A fixed magnifier creates a virtual image 30 cm before itself. Compare its angular size when the eye is at the lens and 10 cm behind it.
  5. Explain why increasing magnification alone cannot indefinitely improve visible detail.

At infinity, M∞ = D/f = 2.5. At the near point, M_D = 1 + D/f = 3.5. The near-point position gives more angular enlargement but requires stronger accommodation.

Key Takeaways

Key Takeaways

• Angular size is the quantity a magnifier increases relative to unaided near-point viewing. • D is a stated reference distance, not a universal property of every eye. • Relaxed-eye viewing gives M = D/f. • Near-point viewing with the eye close gives M = 1 + D/f. • Linear magnification and angular magnifying power are different quantities. • At infinity angular power is finite but finite linear image size is undefined. • Image distance and eye position determine accommodation and field of view.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…