Ray Optics and Optical Instruments · Lesson 13 of 13
Chapter Summary and Practice
“Connect ray laws, signed imaging, optical systems and angular viewing through a complete chapter synthesis.”
• Choose an appropriate reflection or refraction model for a new system. • Connect derivations through the same ray geometry and sign convention. • Distinguish linear, angular and area magnification. • Solve mixed problems while checking physical and dimensional limits.
One ray model, several physical operations
Ray optics replaces detailed wave propagation by directed paths when wavelength is small compared with the optical structures. Reflection uses equality of incidence and reflection angles about the local normal. Refraction uses Snell’s law, with index ratios controlling direction and speed. Curved reflecting or refracting surfaces redirect bundles from an object point to an image point. A complete image is a point-to-point mapping across the object, not an intersection of unrelated rays from different object points. Diffraction and aberrations limit the exactness of that mapping.
Begin any problem by drawing actual ray directions and choosing an axis at each element. For light arriving from the left, real objects usually have u < 0. A real mirror image lies on the return side and has v < 0; a real transmitted image lies on the outgoing side and has v > 0. Virtual objects occur when incoming rays are already converging toward a point beyond the current element. Virtual images occur when outgoing rays diverge but their backward extensions meet. These two uses of “virtual” describe different stages of propagation.
Rebuild the main equations instead of guessing them
For a spherical mirror, reflection doubles a small normal tilt; comparing y/R with the reflected y/f gives f = R/2. Two similar-triangle height ratios give the mirror equation and m = −v/u. For a spherical refracting surface, linearised Snell’s law combines the incident, normal and refracted small slopes into n₂/v − n₁/u = (n₂ − n₁)/R. Apply it twice to a thin lens and cancel the intermediate image term to obtain lensmaker’s equation and the lens imaging equation. Add the imaging equations of contact lenses to get power addition; for separated lenses first translate the object coordinate.
| Relationship | Physical meaning and symbols | Units and validity |
|---|---|---|
| i = r; n₁ sin i = n₂ sin r | Local reflection and refraction; angles from normal | Angles consistent; transparent-media ray model |
| 1/v + 1/u = 1/f; m = −v/u | Spherical mirror imaging and signed height ratio | u, v, f in one length unit; paraxial |
| n₂/v − n₁/u = (n₂ − n₁)/R | One spherical refracting boundary | Indices dimensionless; consistent lengths; paraxial |
| 1/v − 1/u = 1/f; m = v/u | Thin-lens imaging and signed height ratio | Equal outside medium; negligible thickness |
| 1/f = (n_l/n_m − 1)(1/R₁ − 1/R₂) | Lens curvature and relative-index power | Lengths consistent; wavelength-specific indices |
| P = 1/f; P_total = ΣPᵢ | Optical convergence and contact addition | f in metres for dioptres; thin contact lenses |
| sin i_c = n_low/n_high | Threshold for grazing emergence | Higher-to-lower index; total reflection above threshold |
| h_apparent ≈ h n_observer/n_object | Plane-interface apparent position | Near-normal observation |
| n_rel = sin[(A + δ_min)/2]/sin(A/2) | Prism index from a symmetric transmitted path | Same surrounding medium at both faces |
| M∞ = D/f; M_D = 1 + D/f | Simple magnifier angular power | Small angles; eye close for near-point formula |
| M∞ = −(L/fₒ)(D/fₑ) | Compound microscope normal angular power | Optical tube length L; thin paraxial model |
| M∞ = −fₒ/fₑ; s = fₒ + fₑ | Distant-object normal telescope | Small angles; shared focal plane |
Three different magnifications
Linear magnification compares finite image and object heights. Its sign encodes orientation; area magnification is its square. Angular magnification compares angles at the observer using an explicitly stated reference view. A magnifier compares with unaided viewing at D, while a telescope compares with the original distant object angle. An infinity-adjusted instrument has finite angular power even though it does not have a finite final image height. A microscope combines an objective’s linear factor with an eyepiece’s angular factor. Never multiply dimensions or ratios merely because all are called magnification.
Boundary conditions decide whether a formula applies
Total internal reflection requires high-to-low index propagation and incidence above the critical angle. A fibre’s wall-normal angle is complementary to its internal axial angle, while entrance refraction sets the acceptance cone. A parallel slab has parallel emergence only when outside indices match; it can still create a lateral displacement and apparent lift. A prism’s nonparallel faces create net deviation, and its second face may totally reflect instead of transmit. Colour-dependent index causes dispersion and chromatic aberration; stationary interfaces retain each light frequency.
A calculation is complete when its result makes sense
Problem
A +10 cm lens views an object 15 cm before it. Then the same lens is immersed in water, with glass index 1.50 and water index 1.33, while the object remains 15 cm away. Compare images.
- 1.In air, 1/v = 1/10 − 1/15 = 1/30, so v = +30 cm and m = −2: a real enlarged inverted image.
- 2.For unchanged shape, f_water/f_air = (1.50 − 1)/(1.50/1.33 − 1) = 3.9118, so f_water = +39.12 cm.
- 3.Now 1/v = 1/39.12 − 1/15, giving v ≈ −24.33 cm and m ≈ +1.622. The image becomes virtual, upright and enlarged.
- 4.The object has moved from outside to inside the new focal distance without physically moving. Geometry and relative index together determine image reality.
Useful checks include n = 1 giving vacuum speed, i = 0 giving no angular bend, equal indices giving no refractive power, large object distance giving an image near focus, and a convex mirror’s real-object image staying between pole and focus. Reciprocal-distance equations have units of inverse length; magnifications and index ratios are dimensionless. Convert centimetres to metres before quoting dioptres. Recalculate arithmetic and interpret every negative sign before deciding an answer is impossible.
From static images to instruments
A magnifier lets the eye view a close object with a comfortable apparent distance. A microscope first forms a large real intermediate image; a telescope first forms an image of a distant angular field. In both, the eyepiece converts the intermediate geometry into an angle at the eye. Larger aperture helps collect light and can improve resolution, while larger numerical magnification alone cannot create missing detail. Reflecting telescopes fold paths and avoid refractive chromatic focus shifts, but every secondary mirror still obeys its own signed reflection geometry. These connections allow unfamiliar systems to be analysed as a sequence of familiar operations.
Quick Quiz
Quiz
A negative image distance means
Explanation: Its physical reality depends on whether rays are reflected or transmitted and on propagation direction.
A diverging lens forms a real image when
Explanation: A virtual incoming object can yield positive final v.
A lens is immersed without changing shape. Its focal length changes because
Explanation: Lensmaker’s equation contains n_l/n_m.
A normal microscope and a normal telescope both use an eyepiece to
Explanation: Their objectives form intermediate images for different source geometries.
Area magnification for a finite image of m = −3 is
Explanation: Lengths scale by magnitude 3, so areas scale by 3²; orientation does not make area negative.
Practice Problems
- A 2 cm object is 30 cm before a concave mirror with f = −15 cm. Find image distance, height and screen side.
- A +15 cm lens views an object 10 cm before it. Find image and compare its nature with the mirror result above.
- A 450 nm vacuum light wave enters water of index 1.33. Find frequency, speed and wavelength.
- A 2 m deep point lamp is in water of n = 4/3. Find its ideal escape-circle area.
- A symmetric biconvex lens has glass index 1.50 and radius magnitude 20 cm. Find f in air and in index-matched liquid.
- Two lenses +20 cm and −30 cm touch. Find power and image for a real object 90 cm before the pair.
- A +20 cm lens receives rays aimed 12 cm beyond it. Find v, then replace it by a −16 cm lens and repeat.
- A 60° prism of index 1.50 is in air. Derive its minimum deviation and say why white light gives a spread.
- A +5 cm magnifier and a normal eye with D = 25 cm are used in both standard adjustments. Give object position and angular power.
- A normal microscope has fₒ = 1 cm, fₑ = 2 cm and lens separation 23 cm. Calculate its signed power.
- A normal telescope has fₒ = 120 cm and fₑ = 4 cm. Find power, length and effect of doubling objective diameter.
- A lens makes sharp screen images in two positions 30 cm apart while object and screen are 100 cm apart. Determine f and the two magnification magnitudes.
1/v = −1/15 + 1/30 = −1/30, so v = −30 cm. m = −v/u = −1 and hᵢ = −2 cm. Put a screen 30 cm in front of the mirror; actual reflected rays converge there.
Key Takeaways
• Choose a model and sign convention before selecting an equation. • Reflection and Snell’s law generate the chapter’s image equations. • Real and virtual describe ray convergence, while magnification sign describes orientation. • Relative refractive index controls refraction, lens power and critical angles. • Sequential systems require correct intermediate objects and reference points. • Linear, area and angular magnifications are distinct comparisons. • Optical instruments connect intermediate image geometry with the angle reaching the eye. • Units, limiting cases and ray diagrams provide independent checks.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…
Previous · Lesson 12
Refracting and Reflecting Telescopes
Next
End of chapter