Skip to lesson content

Lesson 1 of 13

Ray Optics and Optical Instruments · Lesson 1 of 13

Rays, Reflection and Image Formation

“Build the ray model, trace reflected light and distinguish image location from the screen that displays it.”

Learning Objectives

• Explain when geometrical optics is a useful approximation. • Trace reflected rays using a local normal. • Distinguish real images from virtual images. • Assign Cartesian signs and predict the effect of rotating a mirror.

From waves to rays

A narrow beam passing through a room seems straight, yet light is an electromagnetic wave. These descriptions serve different scales. Visible vacuum wavelengths are roughly 400–750 nm, far smaller than an ordinary mirror or lens. When apertures and relevant structures are much larger than wavelength, rays predict propagation and image geometry well. A ray is a line indicating local propagation direction; it is not a thin material thread. A beam contains many rays. Diffraction becomes important near small apertures and limits how sharply any instrument can resolve details.

In a homogeneous, isotropic transparent medium, rays travel in straight lines. In a medium whose refractive index changes with position, a ray can curve. The vacuum light speed is c = 299,792,458 m s⁻¹ exactly; use 3.00 × 10⁸ m s⁻¹ for ordinary calculations. Never assume that the speed remains c inside glass. In this chapter we first track geometry and then connect it to image formation.

Recall the right-triangle ratios before tracing rays: sin θ is opposite side divided by hypotenuse, while tan θ is opposite side divided by adjacent side. Similar triangles have equal angles and proportional sides. For a small angle measured in radians, sin θ ≈ tan θ ≈ θ. These approximations simplify paraxial imaging; full Snell calculations retain the sine and need a calculator set to the intended degree or radian mode. Reciprocal-distance equations also require signed algebra rather than addition of unsigned path lengths.

The local normal controls reflection

At a smooth surface, construct the normal perpendicular to the local tangent at the point of incidence. The incident ray, reflected ray and normal lie in one plane, and the angles with the normal are equal. On a spherical mirror the normal passes through its centre of curvature. Measuring angles from the surface instead gives complementary angles and can spoil a calculation if conventions are mixed. A rough surface also obeys the law locally, but differently directed normals scatter rays into many directions; a page reflects light without producing a sharp mirror image.

Law of reflectionLaTeX
Both angles are measured from the local normal; a ray making 30° with the surface has i = 60°.
Angles are measured from the normalnormalincidentreflectedirLocal reflection: incident and reflected angles are equal.
Reflection at a plane surface— Solid arrows show propagation; the dashed line is the normal.
A rotated mirror

Problem
A fixed incident beam initially strikes normally. The mirror rotates by 3.5°. Find the reflected-beam rotation and spot shift on a screen 1.50 m away.

  1. 1.The normal rotates by 3.5°. Reflection changes the outgoing direction by twice the normal rotation, so the reflected beam turns through 7.0°.
  2. 2.For a screen perpendicular to the original reflected direction, the lateral displacement is 1.50 tan 7.0° = 0.184 m. The screen distance is measured along that original direction.
  3. 3.The small-angle estimate 2Lθ gives 0.183 m when θ is in radians, consistent with the exact trigonometric result.

What makes an image?

Trace rays from one point of an object. If the outgoing rays actually converge at a point, that point is a real image. After crossing it, they diverge again. A screen placed there scatters the light toward many observers; the screen reveals the image rather than creating its location. Without a screen, a suitably placed eye can intercept the diverging rays after their crossing and see the real image. If outgoing rays diverge but their backward extensions meet, the meeting point is a virtual image. No light travels along those extensions; draw them dashed.

For a plane mirror, reflected rays from an object a distance a in front appear to originate a distance a behind. The image is upright and has the same size. It cannot be projected directly onto a screen placed behind the mirror. Nevertheless a virtual image can be seen: the eye refracts the arriving rays onto its own retina. Real versus virtual describes actual ray convergence, whereas upright versus inverted describes orientation. These distinctions must be assessed separately.

Coordinates before equations

For each optical element, place the origin at its pole or thin-lens optical centre. Take the direction of the incoming axial light as positive x and upward as positive height. In the usual diagram light arrives from the left, so right is positive and a real object on the left has negative object distance u. Distances locate points; they do not measure how far the ray has travelled. A mirror sends light back toward the negative side, so a real mirror image has v < 0. A lens usually transmits light toward the positive side, so its real image has v > 0. When a later reflection reverses propagation, explicitly reset the local convention before using another formula.

QuantityMeaningUsual sign for light arriving from left
uObject coordinate from optical elementNegative for an object on the left
vImage coordinate from optical elementDepends on image side
hTransverse heightPositive above the axis
RCentre-of-curvature coordinatePositive when centre lies to the right

To test your reasoning, cover half a mirror. Does half the image disappear? Usually each object point sends rays to many parts of the surface. Reducing the aperture removes some rays from every point, so the complete image can remain, with reduced brightness and possibly a reduced viewing field. An exact factor of one half requires symmetric illumination and collection; it is not a universal law.

Quick Quiz

Quiz

Quick check

Ray optics is most reliable when an aperture is

Explanation: Wave spreading is relatively small for large apertures.

Quick check

A ray makes 20° with a plane mirror. Its reflection angle is

Explanation: The normal is perpendicular to the surface, so i = r = 90° − 20°.

Quick check

A virtual image point is where

Explanation: The dashed extensions locate an apparent origin.

Quick check

With incident light from left, a real mirror image has

Explanation: The reflected rays meet to the left of the pole.

Quick check

Removing a screen at a real image plane

Explanation: The optical element determines convergence; the screen scatters the arriving light.

Practice Problems

Practice Problems
  1. A ray strikes at 35° to the normal. Find the angle between the incident and reflected ray arms drawn outward from the point of incidence.
  2. An object is 18 cm in front of a plane mirror. Locate its image and give object–image separation.
  3. A mirror turns through 2°. Find reflected-beam rotation for a fixed incident direction.
  4. Explain why an eye can see a virtual image although a screen cannot catch it at its apparent location.
  5. A mirror image is dimmer after half the aperture is covered. Explain why the full object may remain visible.

Each arm makes 35° with the normal, so the angle between them on the reflecting side is 70°. The change in propagation direction is instead 180° − 70° = 110°; state which angle is requested.

Key Takeaways

Key Takeaways

• Rays represent propagation direction within a scale-dependent approximation. • Reflection angles are measured from a local normal. • Real images involve actual convergence; virtual images involve backward extensions. • A screen displays an existing real-image geometry. • Image orientation and image reality are separate properties. • Cartesian signs locate points relative to an optical element. • A fixed beam reflected from a rotating plane mirror turns through twice the mirror angle.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…