Skip to lesson content

Lesson 7 of 13

Ray Optics and Optical Instruments · Lesson 7 of 13

Lens Images, Virtual Objects and Screen Experiments

“Connect thin-lens equations to complete ray diagrams, image cases and practical focusing methods.”

Learning Objectives

• Construct real and virtual lens images using two rays. • Calculate signed linear magnification. • Handle a converging incident beam as a virtual object. • Derive the screen-distance and lens-displacement relations.

The ray rules express the same imaging law

For a converging thin lens in air, a ray parallel to the axis refracts through the far focus F₂; a ray through the near focus F₁ emerges parallel; and a ray through the optical centre is undeviated in the thin-lens approximation with equal outside media. For a diverging lens, an initially parallel ray emerges as if from the near focus. A ray directed toward the far focus emerges parallel. Draw solid lines for actual paths and dashed lines only for backward extensions. A principal ray that misses the physical aperture is a construction aid, not light that actually passes through the lens.

A real image from a converging thin lensprincipal axisF₁OF₂objectimageu = −2f and v = +2f; the centre ray and parallel ray agree.
A converging lens makes a real image— The parallel ray and optical-centre ray meet at the inverted image.
Object inside the converging lens focusprincipal axisvirtual imageobjectF₁F₂ODashed extensions meet before the lens; no light travels along them.
A converging lens used inside its focal distance— Outgoing rays diverge; dashed backward extensions meet at an upright virtual image.

Magnification with its correct sign

Let the object tip be at (u, hₒ) and the image at (v, hᵢ). A straight ray through O has the same slope on both sides. Hence hₒ/u = hᵢ/v, giving m = hᵢ/hₒ = v/u. There is no extra minus sign for a lens. For a real object u < 0 and real image v > 0, m is negative and the image is inverted. If the image is virtual on the object side, v < 0 and m is positive. A virtual image need not be larger: a diverging lens gives a diminished virtual image of a real object.

Lens magnification and image coordinateLaTeX
Use with 1/v − 1/u = 1/f. The denominator vanishes at u = −f, giving outgoing parallel rays in the ideal model.
Real object with converging lensImage locationProperties
Beyond 2fBetween f and 2f on far sideReal, inverted, diminished
At 2fAt 2f on far sideReal, inverted, equal
Between f and 2fBeyond 2f on far sideReal, inverted, enlarged
At fAt infinityParallel outgoing bundle
Inside fOn object sideVirtual, upright, enlarged

For a diverging lens let f = −F and u = −U with F,U > 0. Then v = −FU/(F + U), so −F < v < 0 and m = F/(F + U), between zero and one. For a converging lens with U > f, V = fU/(U − f). This decreases toward f as the object moves far away and grows without bound as the object approaches the focus from outside. These limiting checks connect the equation to the diagrams.

An ordinary concave lens

Problem
A 3.0 cm object lies 14 cm before a diverging lens of focal length −21 cm. Find its image.

  1. 1.u = −14 cm and f = −21 cm. Then 1/v = −1/21 − 1/14 = −5/42, so v = −8.4 cm.
  2. 2.m = (−8.4)/(−14) = +0.60 and hᵢ = +1.8 cm. The image is upright, virtual and reduced.
  3. 3.Moving the object farther away shifts the image toward the near focus and reduces its magnification.
Diverging lens: a reduced virtual imageprincipal axisobjectvirtual imageF₁F₂Dashed extension of the parallel incident ray meets the centre ray before the lens.
Diverging lens with a real object— Backward extensions locate a reduced virtual image.

A lens can receive converging light

Suppose another optical system has already directed rays toward a point P to the right of a lens that is now inserted. For the inserted lens, incoming rays converge toward P, so P is a virtual object with u > 0. A virtual object is not a place from which these incoming rays diverge. This distinction allows a diverging lens to form a real final image: it may weaken a converging bundle without making it diverge.

Two lenses placed in a converging beam, separately

Problem
An unaltered beam would meet 12 cm to the right of the inserted lens. Compare f = +20 cm with f = −16 cm.

  1. 1.For both cases the incoming object is virtual: u = +12 cm. With f = +20 cm, 1/v = 1/20 + 1/12 = 2/15, giving v = +7.5 cm.
  2. 2.With f = −16 cm, 1/v = −1/16 + 1/12 = 1/48, so v = +48 cm. Both images are real.
  3. 3.The converging lens brings convergence forward; the diverging lens delays it. The claim that a diverging lens can never form a real image assumes a real object.

When can a lens project onto a fixed screen?

Let an object and screen be separated by S. Put a converging lens between them, with positive distances a from object to lens and b from lens to screen. Then a + b = S and 1/f = 1/a + 1/b, giving ab = fS. Substitute b = S − a: a² − Sa + fS = 0. Real lens positions require discriminant S² − 4fS ≥ 0, or S ≥ 4f. At equality a = b = 2f and only one position works. For larger S there are two conjugate positions that exchange a and b.

Lens displacement methodLaTeX
d is the separation between the two sharp-image lens positions. Derive d² = S² − 4fS from the two roots. Lengths must share one unit.
Two sharp images on one screen

Problem
Object and screen are 90 cm apart; the two lens positions are 20 cm apart. Find f.

  1. 1.f = (90² − 20²)/(4 × 90) = 7700/360 = 21.39 cm.
  2. 2.The two object distances are (90 ± 20)/2 = 55 and 35 cm; the image distances are exchanged.
  3. 3.Both produce real images, one enlarged and one diminished. The relation assumes a thin lens and fixed object and screen planes.

An optical-bench measurement should align object, lens and screen on a common axis and locate the sharpest image rather than merely a bright patch. Plotting 1/v against 1/u using signed coordinates gives slope +1 and intercept 1/f. The screen does not create the image, and covering half the lens usually dims the complete image rather than cutting it in half. Finite aperture, aberration and alignment set the practical uncertainty.

Quick Quiz

Quiz

Quick check

Lens linear magnification is

Explanation: The undeviated optical-centre ray gives equal signed slopes.

Quick check

A diverging lens with a real object forms an image

Explanation: Its image coordinate lies between the near focus and lens.

Quick check

A converging beam aimed 12 cm beyond an inserted lens gives that lens

Explanation: The incoming rays converge toward a virtual-object point on the outgoing side.

Quick check

A positive lens can project between object and screen separated by S only if

Explanation: The quadratic for lens position needs a nonnegative discriminant.

Quick check

At object distance 2f before a converging lens, the image is

Explanation: The lens equation gives v = 2f and m = −1.

Practice Problems

Practice Problems
  1. An object 2 cm high is 30 cm before a +10 cm lens. Find its image and describe a ray diagram.
  2. A +10 cm lens has an object 6 cm before it. Locate and size the image relative to the object.
  3. Show algebraically that a −F lens gives a diminished virtual image of any real object at distance U.
  4. A bulb and wall are 3.0 m apart. What is the largest focal length of a lens that can project the bulb on the wall?
  5. A beam would converge 10 cm beyond a −20 cm lens inserted into it. Locate the final image.

1/v = 1/10 − 1/30 = 1/15, so v = +15 cm, m = −1/2 and hᵢ = −1 cm. An initially parallel ray passes through F₂; the centre ray remains straight. They intersect 15 cm to the right below the axis.

Key Takeaways

Key Takeaways

• Ray diagrams and the lens equation describe the same first-order geometry. • Lens magnification is v/u; mirror magnification uses a different sign. • A converging lens gives either real or virtual images depending on object position. • A diverging lens gives a reduced virtual image for a real object. • Incoming convergence defines a virtual object with u > 0. • A diverging lens can form a real image from a sufficiently converging beam. • Fixed object–screen projection requires S ≥ 4f.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…