Ray Optics and Optical Instruments · Lesson 11 of 13
Compound Microscopes: Two Stages of Magnification
“Derive the microscope’s magnifying power and solve its geometry without confusing tube length with lens separation.”
• Explain the separate jobs of objective and eyepiece. • Calculate exact lens positions for near-point and infinity adjustments. • Derive the normal-adjustment tube-length approximation. • Explain eye-ring placement and practical limits on useful detail.
First enlarge the image, then enlarge its angle
A simple magnifier is limited by working distance and image quality. A compound microscope uses a short-focal-length objective close to the specimen and an eyepiece near the eye. The specimen sits just beyond the objective’s front focus. The objective makes a real, inverted, enlarged intermediate image. The eyepiece views that intermediate image as a magnifier. If it lies at the eyepiece’s front focal plane, the final rays are parallel; if it lies slightly inside that focal distance, the final image is virtual at a finite comfortable distance. The eyepiece preserves the intermediate image’s orientation, so the final view is inverted relative to the original specimen.
Calculate the exact geometry first
Use positive focal lengths fₒ and fₑ, physical lens separation s, and D = 25 cm for the eye near the eyepiece. The objective uses signed uₒ < 0 and vₒ > 0. At the eyepiece the intermediate image is a real object on its left, so uₑ = vₒ − s < 0. For a relaxed eye set uₑ = −fₑ, giving vₒ = s − fₑ. For final image at the near point set vₑ = −D in the eyepiece lens equation. Then uₑ = −fₑD/(D + fₑ), so vₒ = s − fₑD/(D + fₑ). Once vₒ is known, solve the objective equation for uₒ. This method avoids guessing where to place the specimen.
Problem
A microscope has fₒ = 2.0 cm, fₑ = 6.25 cm and lens separation 15 cm. Find specimen position and magnifying power for each adjustment.
- 1.Infinity: uₑ = −6.25 cm, hence vₒ = 8.75 cm. Then 1/uₒ = 1/8.75 − 1/2 = −27/70, so uₒ = −2.593 cm.
- 2.Objective magnification is 8.75/(−2.593) = −3.375. Eyepiece angular power is 25/6.25 = 4, giving M = −13.5.
- 3.Near point: uₑ = −(6.25 × 25)/(31.25) = −5.00 cm and vₒ = 10.00 cm. Then uₒ = −2.50 cm, mₒ = −4 and Mₑ = 5, so M = −20.
- 4.Both final views are inverted. Refocusing changes the required objective–specimen distance, even though the two lens centres remain 15 cm apart.
Tube length is a focal-plane distance
In normal adjustment, define optical tube length L as the distance from the objective’s back focus to the eyepiece’s front focus. Since the intermediate image is at the latter, vₒ = fₒ + L and s = fₒ + L + fₑ. The objective equation gives mₒ = vₒ/uₒ = 1 − vₒ/fₒ = −L/fₒ. Multiplying by the eyepiece angular power gives M∞ = −(L/fₒ)(D/fₑ). Texts often quote its positive magnitude; the minus sign here records inversion. The equality is within the ideal thin, paraxial normal-adjustment model. Replacing L by physical lens separation s is only an approximation when focal distances are small relative to s.
For a finite near-point image, use the exact vₒ and mₒ from the two-lens geometry. A common estimate |M_D| ≈ (L/fₒ)(1 + D/fₑ) assumes a long tube and treats the intermediate image as close to the eyepiece focal plane. It is useful for design estimates but should not replace the exact equations for a specified short instrument.
Problem
Use fₒ = 1.25 cm and fₑ = 5.0 cm, D = 25 cm. Choose positions for |M| = 30 at the near point.
- 1.The eyepiece has Mₑ = 1 + 25/5 = 6. Thus the objective must have mₒ = −5.
- 2.With vₒ = −5uₒ, the objective equation gives −1/(5uₒ) − 1/uₒ = 1/1.25. Hence uₒ = −1.50 cm and vₒ = +7.50 cm.
- 3.The eyepiece object distance is uₑ = −(5 × 25)/(25 + 5) = −4.167 cm. Set lens separation s = vₒ − uₑ = 11.667 cm.
- 4.This yields M = −30 with a final virtual image at −25 cm from the eyepiece; state the adjustment because an infinity design would use different positions.
Where should the eye be?
The eyepiece also images the objective aperture. This image is the exit pupil or eye-ring. Place the eye’s pupil near that plane so it intercepts the outgoing bundles from the full field. It is generally a short distance behind the eyepiece rather than exactly on its glass. If the objective aperture is a distance s before the eyepiece, the simple thin-lens pupil estimate uses object distance −s and gives pupil distance v_p = fₑs/(s − fₑ). Actual instrument stops and multi-element optics can change this location. This pupil image is distinct from the final specimen image, which may be at infinity.
Both short focal lengths help produce large angular power in the long-tube model, but the objective must also collect sufficient angular spread from the specimen to resolve detail. Illumination, aperture, diffraction and aberrations control usable image information. Modern objectives use several elements and can have sub-centimetre focal lengths; there is no universal physical prohibition on such lengths. A numerical magnification claim alone does not establish microscope quality.
Quick Quiz
Quiz
A microscope objective normally forms an intermediate image that is
Explanation: The specimen is just beyond the objective focus.
For relaxed final viewing, the intermediate image lies
Explanation: The eyepiece then emits parallel rays for each image point.
Optical tube length L in the normal-adjustment formula is
Explanation: s = fₒ + L + fₑ in the ideal layout.
The final microscope view is inverted because
Explanation: The eyepiece produces an upright view of the already inverted intermediate image.
The exit pupil is
Explanation: Positioning the eye there improves access to the admitted field.
Practice Problems
- For fₒ = 1 cm, fₑ = 2 cm and optical tube length L = 20 cm, find normal magnifying power and lens separation.
- A microscope has fₒ = 0.8 cm and fₑ = 2.5 cm; the specimen is 0.9 cm before the objective. Find s and M for near-point final image, D = 25 cm.
- Find the same s and M for the preceding specimen position if final viewing is at infinity.
- An eyepiece has fₑ = 5 cm and its objective aperture is 20 cm before it. Estimate the eye-ring position.
- Why is multiplying two linear magnifications inappropriate for an infinity-adjusted microscope’s final viewing power?
M = −(20/1)(25/2) = −250. Lens-centre separation s = L + fₒ + fₑ = 23 cm. The negative sign records inversion; quoting 250 alone normally means magnitude.
Key Takeaways
• The objective first forms a real enlarged inverted image. • The eyepiece acts as a magnifier of the intermediate image. • Use exact sequential lens equations for specified instrument dimensions. • Normal adjustment places the intermediate image at the eyepiece front focus. • Optical tube length differs from lens-centre separation. • Signed microscope angular power records the objective’s inversion. • The eye-ring is an image of the aperture, not the specimen.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…