Electrostatic Potential and Capacitance · Lesson 2 of 11
Superposition and Electric Dipole Potential
“Add signed scalar potentials and derive the spatial dependence of dipole potential.”
• Calculate potential from several discrete or continuous sources. • Find zero-potential positions using positive geometric distances. • Derive exact and far-field dipole potentials. • Distinguish zero potential from zero electric field.
Many sources, one scalar sum
Two sources can reinforce or cancel the work per unit charge needed to reach a location. Because the electric fields add, their work contributions add too. Potential is therefore the algebraic sum of the source potentials, all using the same reference. Add signed numbers, not vector components. Directions become necessary when calculating electric field or force, even if the potential calculation was a simple sum.
For a continuous distribution, divide the source into small elements, find each element’s potential and integrate. For example, all parts of a ring of radius a are equally far from a point on its axis at distance x from its centre. Pull the common denominator √(a² + x²) out of the integral and use ∫dq = Q: V = kQ/√(a² + x²). The result approaches kQ/|x| far away. The integral sums source charge; x is not the distance from the observation point to each ring element.
Problem
Six equal charges +2 nC lie at vertices of a regular hexagon of side 0.10 m. Find the potential and field at its centre. Use k = 9 × 10⁹.
- 1.The centre-to-vertex distance equals the side of a regular hexagon, so every potential contribution is (9 × 10⁹)(2 × 10⁻⁹)/0.10 = 180 V.
- 2.The sum is V = 6(180) = 1080 V. All contributions are positive.
- 3.Electric-field vectors from opposite vertices cancel, giving E = 0 at the centre. Zero field does not force potential to be zero.
Locating zero potential on a line
Place +3 nC at x = 0 and −2 nC at x = 0.15 m. The equation is 3/|x| − 2/|x − 0.15| = 0. The absolute values are distances. Split the line into regions before removing them. Between the charges it becomes 3/x = 2/(0.15 − x), giving x = 0.09 m. To the right it becomes 3/x = 2/(x − 0.15), giving x = 0.45 m. On the left, the larger positive charge is also nearer than the smaller negative charge, so cancellation is impossible. Exclude the source positions themselves.
A neutral object can have nonzero potential nearby
An electric dipole has charges −q and +q separated by 2a. Its moment p points from negative to positive and has magnitude 2aq, in C m. Put the origin at its midpoint and choose the polar angle θ between p and the vector to observation point P. The positive end is closer when cos θ > 0, so its positive potential contribution dominates there.
For r much larger than a, factor r² from both square roots. Use (1 + u)⁻¹ᐟ² ≈ 1 − u/2 for small u and retain the terms first order in a/r: 1/r+ ≈ (1/r)(1 + a cos θ/r) and 1/r− ≈ (1/r)(1 − a cos θ/r). Subtracting cancels the two 1/r terms and leaves 2a cos θ/r². Multiplying by kq gives the far-field dipole potential.
On the positive axis V ≈ +kp/r²; on the negative axis V ≈ −kp/r². In the equatorial plane θ = 90°, the distances are exactly equal, so V = 0 even without the far-field approximation. Cancellation there does not mean the charges exert no force: their field components along the dipole axis reinforce in the direction opposite p. For a finite dipole at its midpoint the field magnitude is 2kq/a². At large fixed angle, dipole potential decreases as 1/r², faster than a single nonzero net charge’s 1/r potential.
Problem
A dipole has q = 2 nC, separation 2a = 0.020 m. Estimate potential at r = 0.20 m, θ = 60°, with k = 9 × 10⁹.
- 1.p = q(2a) = (2 × 10⁻⁹)(0.020) = 4 × 10⁻¹¹ C m; r/a = 20 supports a distant-dipole estimate.
- 2.V ≈ (9 × 10⁹)(4 × 10⁻¹¹)(0.5)/(0.20)² = 4.5 V.
- 3.The exact distances are √0.0381 m and √0.0421 m; direct substitution gives approximately 4.49 V, consistent with the approximation. At distances comparable to a, use the exact expression instead.
Quick Quiz
Quiz
Potential from several charges is found by
Potential is scalar and obeys superposition with a common zero reference.
At the centre of a regular polygon with equal positive vertex charges,
Symmetry cancels vectors while positive scalar contributions add.
Where is the exact potential of an equal-and-opposite finite dipole zero?
Points on the equatorial plane are equally distant from +q and −q.
At fixed angle away from its zero-potential plane, distant-dipole potential scales as
The leading 1/r source terms cancel, leaving kp cos θ/r².
The dipole formula kp cos θ/r² is generally appropriate for a finite dipole when
The binomial approximation requires a/r to be small.
Practice Problems
- Charges +4 nC and −1 nC are each 0.20 m from P. Find V at P and energy of +3 nC placed there. Use k = 9 × 10⁹.
- Charges +5 nC at x = 0 and −3 nC at x = 0.16 m produce zero potential where on the line?
- A dipole has p = 6 × 10⁻¹⁰ C m. Find its far-field potential at r = 0.30 m and θ = 60°, then at 120°. Use k = 9 × 10⁹.
- Show why a dipole can have V = 0 and E ≠ 0 at its midpoint.
- Derive the potential at the centre of a uniformly charged ring and check its far-axis limit.
V = k(4 − 1) × 10⁻⁹/0.20 = 135 V. U = (3 × 10⁻⁹)(135) = 405 nJ. Only distances are needed for potential; the vector field needs the source geometry.
Key Takeaways
• Add signed potentials algebraically using one reference. • Distances in kq/r are positive geometric lengths. • Zero potential does not imply zero field, or the reverse. • A dipole moment points from −q to +q. • The exact finite-dipole potential is kq(1/r+ − 1/r−). • At large r its leading potential is kp cos θ/r².
Finished this lesson? Mark it complete to track your progress.
Loading your progress…