Electrostatic Potential and Capacitance · Lesson 3 of 11
Equipotential Surfaces and the Potential Gradient
“Read the electric field from potential differences, equipotential spacing and graph slopes.”
• Explain why electric fields are normal to equipotential surfaces. • Calculate field components from potential gradients. • Interpret point-charge and conducting-shell potential graphs. • Distinguish constant potential throughout a region from zero potential at a point.
A map of energy per charge
Imagine marking every location with its potential. Joining locations with the same value produces an equipotential surface. Moving a charge along it changes neither qV nor its electric potential energy, so the electric field does no work. This statement concerns electric work: other forces could still speed the charge up, slow it down or do dissipative work.
If a nonzero electric field had a component along an equipotential surface, a small displacement along that component would give nonzero electric work. That contradicts constant potential. The field is therefore perpendicular to a smooth equipotential wherever the field is nonzero. Different-valued equipotential surfaces cannot intersect because a point cannot have two potentials. At a zero-field critical point, a unique normal direction may be undefined; do not infer a nonzero direction there just from a sketch.
Why the derivative has a minus sign
For a small displacement dl, field work on q is qE · dl and the potential-energy change is q dV. Since these are opposite, dV = −E · dl. Divide by a displacement in the x-direction to obtain Ex = −dV/dx. The derivative is a local slope. It is not generally −V/x: that ratio only works for a suitable linear graph and reference. The complete vector relation is E = −∇V; its three components are the negatives of the potential’s three spatial rates of change.
The field points in the direction of steepest potential decrease, independent of the moving test charge. A positive charge feels force along E and a negative one opposite E. If equal potential steps occur over shorter normal distances, the field is stronger. Only compare spacing when the potential increments are equal, and remember that a diagram is a two-dimensional section through a three-dimensional configuration.
Problem
In a region, V(x) = 40 V − (6 V m⁻²)x². Find Ex at x = +2 m and x = −2 m.
- 1.Differentiate with respect to x: dV/dx = −(12 V m⁻²)x. Therefore Ex = +(12 V m⁻²)x.
- 2.At +2 m, Ex = +24 V m⁻¹, towards +x. At −2 m, Ex = −24 V m⁻¹, towards −x.
- 3.At x = 0 the field vanishes although V = 40 V. Adding 100 V everywhere would leave these fields unchanged.
Spheres, shells and constant-potential interiors
A point charge produces V = kQ/r, so every sphere centred on it is equipotential. Differentiating gives radial field Er = −dV/dr = kQ/r². A uniformly charged thin spherical shell of radius R has the same external potential. Inside it the field is zero throughout, so no potential difference exists between interior points: the potential is constant and equal to its surface value, not necessarily zero.
Problem
An isolated sphere has R = 0.12 m and Q = 1.6 × 10⁻⁷ C. Calculate V inside and E at r = 0.18 m, using k = 9 × 10⁹.
- 1.Every interior point has V = kQ/R = 1.20 × 10⁴ V and E = 0.
- 2.Outside, E = kQ/r² = 1440/0.0324 = 4.44 × 10⁴ N C⁻¹ radially outward.
- 3.The interior potential describes its value relative to infinity; the zero interior field describes the absence of a local potential gradient.
Interpreting motion from a potential map
At a dipole’s equatorial plane, potential is zero along the plane but changes when you move normally away from it. Thus a nonzero normal field is compatible with zero potential on that surface. In contrast, if potential is constant throughout a three-dimensional open region, every spatial derivative is zero and so is the field there. A single zero-potential point tells us no slope information.
For two equal positive charges, the potential contributions reinforce everywhere finite, even though their field vectors cancel at the midpoint. Far from the pair the equipotentials approach spheres of a total charge 2q; near either charge they resemble spheres centred on that source. In between they deform rather than remaining two independent sets of intersecting spheres. For an equal-and-opposite dipole, positive and negative potential regions are separated by the zero-potential equatorial plane. These maps must be generated from the combined potential, not by simply overlaying the isolated-charge contours.
Quick Quiz
Quiz
A smooth equipotential surface has a nonzero electric field that is
A tangential component would perform nonzero electric work between equal-potential points.
Potential falls from 60 V to 20 V over 0.20 m towards +x in a uniform field. Ex is
Ex = −ΔV/Δx = −(−40)/0.20 = +200 V m⁻¹.
Closely spaced equipotentials indicate a stronger field when
Field magnitude is the normal potential change per unit distance.
Inside an isolated positively charged conducting sphere,
E vanishes in equilibrium; V matches the positive surface value kQ/R.
Which graph property gives Ex in a one-dimensional potential plot?
Ex = −dV/dx is a derivative, not an absolute-potential value.
Practice Problems
- A uniform field of 300 V m⁻¹ points along +x. Find VB − VA for a displacement of 0.40 m along +x and 0.30 m along y.
- For V(x) = 10 + 4x − 2x² in SI units, find Ex and its value at x = 3 m.
- Equal 10 V contour steps are 2 mm apart near A and 5 mm apart near B. Estimate field magnitudes.
- A shell has radius 0.10 m and charge −2 nC. Find V at r = 0, 0.05 m and 0.20 m using k = 9 × 10⁹.
- Explain why an equipotential does not generally constrain a released charge to remain on it.
Only the parallel displacement contributes to E · dl. ΔV = −300(0.40) = −120 V. The y motion lies along an equipotential and contributes no electric work.
Key Takeaways
• Equipotentials have one potential value and zero electric work along them. • Where E is nonzero it is normal to a smooth equipotential. • The negative potential slope gives the signed field component. • Equal potential steps closer together indicate stronger fields. • A spherical shell has constant interior potential, continuous with its surface. • Zero potential at a point does not determine the field there.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…