Electrostatic Potential and Capacitance · Lesson 5 of 11
Conductors in Electrostatic Equilibrium
“Explain charge redistribution, surface fields, constant potential and electrostatic shielding.”
• Explain why the field vanishes within conducting material at equilibrium. • Derive the field immediately outside a conductor. • Distinguish an empty shielded cavity from conducting material. • Apply potential and grounding ideas to simple physical situations.
Mobile electrons create the equilibrium
A metal contains mobile electrons and relatively fixed positive ions. The electrons already move randomly even when there is no current. An applied electric field adds a small directed drift opposite the field. In an isolated conductor, this redistributes charge until the induced electric field cancels the applied field within the conducting material. Electrostatic equilibrium means this redistribution has finished; it does not mean every electron has stopped moving.
If a nonzero macroscopic field persisted within the material, free charges would continue drifting. Therefore E = 0 inside the material at equilibrium. The condition does not apply to a wire carrying steady current, whose charges need a driving field, nor to a nonconducting cavity simply because it lies geometrically inside a metal object.
Where excess charge can reside
Draw any small Gaussian surface entirely within the conducting material. Its field and therefore its flux are zero, so Gauss’s law gives zero enclosed net charge. This shows that excess macroscopic charge cannot remain in the bulk; it lies on surfaces. Both positive and negative constituents remain in the bulk and cancel macroscopically. For a conductor with a cavity, surfaces include the inner wall as well as the outer surface.
The potential difference between any two points connected through the material is the negative integral of the field, and is zero. A connected conductor is therefore one equipotential, including its surface. The constant need not be zero. Separate conductors can have different constant potentials, which is the basis of a capacitor. Grounding allows exchange of charge with a large reservoir to set the connected conductor’s potential approximately to the chosen earth reference.
Surface field: derive the boundary condition
Just outside a smooth conductor, there can be no tangential field at equilibrium: otherwise surface charges would move along the surface. Draw a tiny pillbox Gaussian surface crossing the boundary. One end is inside the material and contributes no flux. The thin side contributes negligibly, leaving only the outer face. With outward unit normal n and a small area ΔA, the signed flux is E · n ΔA and the enclosed charge is σ ΔA.
This is not σ/(2ε₀), the field of one isolated infinite nonconducting sheet in vacuum. A conducting boundary has zero total field on its material side, so its one-sided external field is σ/ε₀. The total field incorporates all source charges, not just the nearby patch. Surface charge need not be uniform: its distribution adapts to the shape and external sources. Sharp regions can concentrate charge and increase the local field.
Problem
A smooth metal surface in vacuum has σ = −8.85 nC m⁻². Find its adjacent external field using ε₀ = 8.85 × 10⁻¹² F m⁻¹.
- 1.Eout · n = σ/ε₀ = −1000 V m⁻¹. Its magnitude is 1000 V m⁻¹ and it points into the conductor.
- 2.The material-side field is zero. A negative normal component describes direction; it is not a negative field magnitude.
What shielding does and does not say
An empty, fully enclosed cavity inside an equilibrium conductor has zero field throughout the cavity, even if the outside sources and the cavity shape lack symmetry. The inner boundary has constant potential; with no enclosed charge, the electrostatic solution inside is that same constant. Gauss’s law alone, giving zero net flux, is not enough to prove zero field in an arbitrary cavity. The full boundary-value result is needed.
If charge q is placed inside the cavity without touching the wall, the cavity field need not vanish. A Gaussian surface in the surrounding metal still has zero flux, requiring induced inner-wall charge −q. If the conductor was isolated and neutral, its outer surface then has total +q. External fields cannot penetrate the closed conductor into the cavity, but an isolated enclosure need not eliminate the external effects of an internal charge. Grounding changes the outer-surface charge by allowing exchange with earth.
Problem
A neutral isolated conductor contains a cavity with a fixed +5 nC charge. Find total charges on the two surfaces and identify zero-field regions.
- 1.A Gaussian surface within metal encloses the cavity charge and inner wall. Zero material field requires +5 nC + Qinner = 0, so Qinner = −5 nC.
- 2.Neutrality of the conductor gives Qouter = +5 nC. The charge placed in the cavity is not part of the conductor’s neutrality condition.
- 3.E = 0 in metal. The cavity generally has a nonzero field because it contains a charge; the exterior may also have a field.
Applications are about potential difference
A sensitive instrument inside an empty conducting enclosure is protected from static external fields. Grounding can also drain accumulated charge from equipment. A bird contacting one power line usually has a small potential difference between its feet, whereas an object bridging conductors at different potentials can carry a dangerous current. High absolute potential alone does not determine current through a body; insulation, contact geometry and potential difference matter. These are explanatory examples, not instructions to approach electrical lines.
Static charge can accumulate on moving vehicles or aircraft through contact and frictional processes. Slightly conducting tyres or appropriate grounding connections can help drain it and reduce charge accumulation. The relevant mechanism is a conducting path for charge redistribution. An ideal perfect insulator would retain charge more readily, whereas ordinary leakage depends strongly on material and environmental conditions.
Quick Quiz
Quiz
At electrostatic equilibrium inside conducting material,
A remaining field would drive free charges; random microscopic electron motion can remain.
The vacuum field just outside a smooth conductor has magnitude
A thin pillbox has flux only through its outer face because the material-side field is zero.
A connected isolated conductor is
The integral of E between connected material points vanishes.
An empty fully enclosed cavity is shielded from
The electrostatic cavity result assumes no charges inside and an equilibrium conducting boundary.
A +q charge lies inside a neutral isolated conductor cavity. Total outer-surface charge is
The inner surface carries −q, leaving +q on the outside to preserve the conductor’s neutrality.
Practice Problems
- A surface has σ = +1.77 × 10⁻⁸ C m⁻² in vacuum. Find the one-sided adjacent field.
- An isolated conductor has total +3 nC and contains a cavity charge −2 nC. Find inner- and outer-wall charges.
- Explain why zero flux through an arbitrary closed surface does not alone prove zero field everywhere on it.
- A metal sphere is at 500 V. What is the work done by the field moving +4 nC between two points inside its material?
- Contrast an isolated neutral conducting enclosure containing +q with an initially identical grounded enclosure.
E = σ/ε₀ = (1.77 × 10⁻⁸)/(8.85 × 10⁻¹²) = 2000 N C⁻¹, outward. Just inside the metal the equilibrium field is zero.
Key Takeaways
• Mobile charges redistribute until E = 0 within conducting material. • Bulk neutrality does not mean the absence of charged particles. • A connected conductor is equipotential but need not be at zero potential. • Just outside a smooth vacuum boundary E = (σ/ε₀)n. • An empty closed cavity is shielded from static external fields. • An internal cavity charge induces equal-and-opposite inner-wall charge. • Grounding fixes potential by allowing charge exchange.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…