Skip to lesson content

Lesson 4 of 11

Electrostatic Potential and Capacitance · Lesson 4 of 11

Energy of Charge Systems and Dipoles

“Build charge configurations by work, count interactions once and explain dipole rotation in external fields.”

Learning Objectives

• Calculate mutual potential energy without double counting. • Combine external-potential and mutual-interaction energies. • Derive the orientation energy of a dipole in a uniform field. • Distinguish equilibrium, stability and dissipative alignment.

Assembling a configuration one charge at a time

Potential at an empty location is not the same quantity as the energy of a whole charge system. To build a two-charge system from infinite separation, bring q₁ first into otherwise empty space. There is no interaction work yet. Bring q₂ next to distance r₁₂ from q₁ while holding the first charge fixed. The required slow work is q₂ times the potential due to q₁. That work defines the mutual interaction energy, excluding the charges’ self-energies.

Pair interaction energyLaTeX
U is in joules. Each unordered pair appears once. Like charges have positive energy relative to infinite separation; unlike charges have negative energy. These point-charge expressions exclude self-interaction.

For three charges, bringing q₃ requires work against both existing charges, so U = kq₁q₂/r₁₂ + kq₁q₃/r₁₃ + kq₂q₃/r₂₃. With N charges there are N(N − 1)/2 distinct pairs. Another representation is U = ½ΣqiVi, where Vi is potential due to all the other charges only. The factor one-half removes double counting: q₁V₂ and q₂V₁ describe the same pair. Do not include a point charge’s own infinite potential.

An alternating square

Problem
Four charges +q, −q, +q, −q occupy successive corners of a square of side d. Find its assembly energy.

  1. 1.There are four edge pairs, each unlike, contributing −kq²/d. Their sum is −4kq²/d.
  2. 2.There are two diagonal pairs, each like, separated by √2d. Their total is 2kq²/(√2d) = √2kq²/d.
  3. 3.U = (−4 + √2)kq²/d, a negative value. At the centre, equal positive and negative potential contributions cancel, so bringing an additional small charge there takes zero net work while the four corner sources remain fixed. This does not make the square’s existing energy zero.

When there is an external source as well

If specified charges occupy an external potential Vext, count each charge’s interaction with those external sources and then count the specified charges’ mutual pairs once. The external sources are held fixed or unaffected. Their own assembly energy is outside the accounting. The external potential must exclude the specified charges, or their mutual interactions would be counted twice.

Two charges in an external potentialLaTeX
This is the subsystem energy in a prescribed static external potential, plus its mutual energy. Adding a constant to Vext adds the corresponding constant times total subsystem charge, without changing force or energy differences.
A radial external field

Problem
Charges +7 μC and −2 μC lie at x = −0.09 m and +0.09 m. An external radial field has Er = A/r², with A = 9 × 10⁵ V m and zero potential at infinity. Find the energy.

  1. 1.Mutual energy is (9 × 10⁹)(7 × 10⁻⁶)(−2 × 10⁻⁶)/0.18 = −0.70 J.
  2. 2.Integrating the external field gives Vext = A/r = 1.0 × 10⁷ V at both charge locations. The external interaction is (7 − 2) × 10⁻⁶ × 10⁷ = 50 J.
  3. 3.Total energy is 49.3 J. Without the external field it would be −0.70 J, and slow separation to infinity would require +0.70 J.

Dipole rotation: a torque without a net force

In a uniform field, the forces +qE and −qE cancel, but their separated lines of action create torque. With θ measured from E to dipole moment p, the torque magnitude is pE sin θ and it tends to decrease θ towards alignment. During slow rotation that increases θ, the external torque must oppose this tendency. Its work is the integral of pE sin θ dθ.

Dipole orientation energy and slow workLaTeX
Take orientation energy zero at θ = 90°. Integrating sin θ gives −cos θ. The result is exact for a rigid finite dipole in a uniform field; its fixed internal energy is an omitted constant. pE has units (C m)(N C⁻¹) = J.
Dipole orientation energyDipole orientation energyθU/(pE)0: stableπ/2π: unstable−1+1U = −pE cos θ
Dipole orientation energy and stability— U = −pE cos θ is lowest at alignment and highest at anti-alignment. Zero torque alone does not establish stability.

At θ = 0 the energy is minimum, so a small displacement creates a restoring torque: stable equilibrium. At θ = π energy is maximum, so a small perturbation moves it farther away: unstable equilibrium. Both have zero torque. Without damping, a disturbed dipole can oscillate around alignment rather than settle. In a nonuniform field it can also have a net translational force; the zero-net-force statement is specific to a uniform field.

Field turned, then dipoles relax

Problem
One mole of identical dipoles with p = 1.0 × 10⁻²⁹ C m each was aligned with a field E = 10⁶ V m⁻¹. The field suddenly turns 60°. Estimate heat released during subsequent complete damped realignment, assuming all dipoles remain parallel.

  1. 1.The total moment is NAp ≈ (6.02 × 10²³)(10⁻²⁹) = 6.02 × 10⁻⁶ C m. Immediately after the field turns, the dipoles have not yet rotated: Uinitial = −(6.02 J) cos 60° = −3.01 J.
  2. 2.After realignment with the new field, Ufinal = −6.02 J. The relaxation change is ΔU = −3.01 J, so 3.01 J can be released as heat if no kinetic energy remains.
  3. 3.Before the field turned the energy was also −6.02 J. The field-changing apparatus first supplied 3.01 J to the dipoles; relaxation then released it. The two stages must not be interchanged.

Quick Quiz

Quiz

Quick check

How many distinct pair interactions exist among four point charges?

Explanation

There are 4 × 3/2 = 6 unordered pairs.

Quick check

A negative mutual interaction energy for two unlike charges means

Explanation

The separated reference has U = 0; raising negative U to zero requires positive external work.

Quick check

Which potential belongs in ½ΣqiVi for mutual energy?

Explanation

Self-interaction is excluded; the half factor removes duplicate pair counting.

Quick check

A rigid dipole’s stable orientation in a uniform field is

Explanation

U = −pE cos θ has its minimum at θ = 0.

Quick check

A dipole released away from alignment with no damping generally

Explanation

Conservative torque converts potential energy to rotational kinetic energy and back.

Practice Problems

Practice Problems
  1. Find the mutual energy of +2 μC and −3 μC separated by 0.30 m, and work for slow separation to infinity. Use k = 9 × 10⁹.
  2. Three equal +1 μC charges lie at the vertices of an equilateral triangle of side 0.20 m. Find assembly energy.
  3. Charges +2 μC and −1 μC are 0.10 m apart, at external potentials 30 V and 50 V. Find their energy excluding external-source self-energy.
  4. A dipole has p = 4 × 10⁻⁸ C m in E = 2000 N C⁻¹. Find slow work rotating it from 60° to 120°.
  5. Explain why zero torque at 180° does not mean a dipole will return after a small disturbance.

U = (9 × 10⁹)(2 × 10⁻⁶)(−3 × 10⁻⁶)/0.30 = −0.18 J. The separated state has zero interaction energy, so Wext = 0 − (−0.18) = +0.18 J.

Key Takeaways

Key Takeaways

• Mutual energy counts each pair once and excludes self-energy. • Unlike-charge interaction energy is negative relative to infinite separation. • Add prescribed external-potential interactions separately from mutual pairs. • A dipole in a uniform field can feel torque despite zero net force. • Orientation energy is −pE cos θ with zero at 90°. • Alignment is stable; anti-alignment is unstable. • Permanent settling requires energy dissipation.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…