Skip to lesson content

Lesson 11 of 11

Electrostatic Potential and Capacitance · Lesson 11 of 11

Chapter Summary and Practice

“Connect potential, field, energy, conductors, dielectrics and capacitor networks through a unified problem-solving method.”

Learning Objectives

• Choose a consistent potential reference and energy accounting system. • Connect field gradients with charge forces and work. • Select the correct constraint for capacitor changes. • Solve chapter-wide conceptual, numerical and network problems.

One connected chain of physical ideas

Start with charges and the electric field they create. The field tells you force per unit positive test charge, including direction. In electrostatics its work is path independent, allowing a scalar potential map. Potential differences determine electric work through the signed charge. The spatial gradient of the same map gives the electric field, so field and potential are two connected descriptions of one configuration rather than unrelated topics.

When the sources are specified, add their potentials as scalars. When a moving charge is introduced, use its signed q to obtain potential-energy change. When several charges form the system whose energy is requested, count each mutual pair once and exclude self-energy. If a prescribed external potential is also present, include those external interactions separately. A zero potential can coexist with nonzero field, while a nonzero constant potential throughout a region has zero field.

Reference equations with their conditions

RelationMeaning and unitsConditions and limitations
ΔU = qΔV; Wfield = −qΔVCharge q in C, potential V in J C⁻¹, energy in JStatic prescribed sources; use signed q and a consistent reference
V = kΣqi/riScalar potential from point charges; ri in mVacuum, distances positive, infinity as zero for finite sources
Vdip ≈ kp cos θ/r²p in C m; θ measured from p to observation directionDistant finite dipole r ≫ a, or ideal point dipole away from origin
Ex = −dV/dxField component in V m⁻¹One-dimensional variation; use gradient components in general
Umutual = kΣi<j qiqj/rijEnergy of distinct charge pairs in JCount once; exclude point-charge self-energy
Udip = −pE cos θOrientation energy in JRigid dipole, uniform prescribed E, zero chosen at 90°
Eout = (σ/ε₀)nOne-sided vacuum field at conducting boundarySmooth surface at electrostatic equilibrium
P = ε₀χeE; K = 1 + χeP in C m⁻², χe and K dimensionlessLinear isotropic electrostatic dielectric response
C = Q/V; Cplate = ε₀KA/dCapacitance in F, A in m², d in mLinear response; broad closely spaced plates; complete homogeneous filling
Cslab = ε₀A/(d − t + t/K)Full-area partial-thickness slabLayers along field, negligible fringing
Cparallel = ΣCi; 1/Cseries = Σ1/CiEquivalent terminal capacitanceSeries equal-Q reasoning assumes initially neutral isolated internal nodes
U = Q²/(2C) = ½CV² = ½QVStored energy in JLinear capacitors; include battery work separately
u = ½ε₀E²Vacuum field energy density in J m⁻³Use the corresponding material model for dielectric storage

Three derivation paths worth being able to explain

Potential of a point charge follows by integrating −kQ/r² from the reference to the observation point. The result kQ/r contains one inverse power of distance, while differentiating it returns the field’s inverse-square dependence. For a dipole the leading positive and negative 1/r contributions cancel; the first surviving far-field term contains the moment p and varies as cos θ/r². This is why neutral dipoles can interact locally while producing a shorter-range potential than a nonzero net charge.

Parallel-plate capacitance follows a different chain: add sheet fields to obtain E = Q/(ε₀A), integrate across a uniform gap to obtain V = Ed, and form Q/V. A dielectric changes the relation between free charge and total field; complete filling replaces ε₀ by ε. Series and parallel formulas then follow from node charge conservation and shared voltage, respectively. None of these results can be selected reliably from visual drawing position alone.

Capacitor energy comes from adding incremental charging work. Voltage is q/C at the intermediate charge, so the triangular area under V(q) gives Q²/(2C). This explains why final-state stored energy and work done by a constant-voltage battery are not generally the same. In a mechanical or charge-sharing process, define the whole accounting system before applying energy conservation.

Comparisons that prevent wrong answers

Question to askCorrect distinctionExample check
Potential or potential energy?Source property V versus interaction energy qVChanging test-charge sign reverses U but not V
Zero V or zero E?Value versus spatial slopeDipole equatorial plane: V = 0, E can be nonzero
Conductor or cavity?Material field vanishes; charged cavity can have fieldUse induced inner-wall charge −q
Free or bound charge?External circuit transport versus polarisationIsolated plates keep Q despite changing V
Q fixed or V fixed?Isolation versus ideal battery connectionFull filling: V/K at fixed Q, KQ at fixed V
Series or parallel?Conserved internal-node charge versus shared endpointsSeries smaller C gets greater voltage
Charge conservation or energy conservation?Both hold for the full system, but stored energy can transferCharge sharing can dissipate electrostatic energy
Choose what is held fixedChoose what is held fixedDisconnectedBattery connectedQ fixed; V → V₀/KV fixed; Q → KQ₀U → U₀/KU → KU₀Full filling, unchanged geometry, linear dielectric: C → KC₀
Choose the constraint before predicting capacitor changes— The same dielectric raises capacitance in both cases. Isolation and battery connection give different charge, voltage and stored-energy outcomes.
A mechanical change after charging

Problem
A 30 pF vacuum capacitor is at 120 V. Disconnect it and double its plate separation. Find new capacitance, voltage and energy change.

  1. 1.Initial Q = 3.6 nC and U₀ = ½(30 × 10⁻¹²)(120)² = 216 nJ. Isolation keeps Q fixed.
  2. 2.New C = 15 pF; new V = Q/C = 240 V. Ufinal = Q²/(2Cfinal) = 432 nJ.
  3. 3.The energy increase is 216 nJ. Slow separation requires positive external mechanical work against the attractive plate force. The central field remains Q/(ε₀A), unchanged in the ideal approximation.
Source charge, particle energy and field gradient

Problem
A fixed +8 nC source is at the origin. A +2 nC particle moves from r = 0.40 m to 0.20 m. Find the voltage change, energy change and slow external work using k = 9 × 10⁹.

  1. 1.VA = 180 V and VB = 360 V, so ΔV = +180 V. Potential increases as you move against the outward field.
  2. 2.ΔU = (2 × 10⁻⁹)(180) = +360 nJ. Slow external work is +360 nJ and electric work is −360 nJ.
  3. 3.At the two radii the outward fields are 450 and 1800 V m⁻¹. Halving distance doubles potential but quadruples field. The signs and distance dependence support the calculation.

A repeatable solution method

Draw the configuration and label sources, observation points, conductors, material boundaries and electrical nodes. Specify the reference and whether a potential is external or includes specified source charges. Convert cm to m, mm to m, and capacitance prefixes before calculation. Predict signs and scaling. Choose the physical constraint, then the equation. After solving, check units, voltage sums, node charges, limiting cases and whether the numerical magnitude is credible. State what the answer means: a negative work value, for instance, means energy is extracted by that agent, not that the calculation failed.

For an experimental comparison, use a suitable low-voltage capacitance measurement instrument to compare plate arrangements while changing one variable at a time. Increasing overlap or reducing separation should increase measured capacitance. Keep leads and nearby objects arranged consistently because they add stray capacitance; avoid interpreting a small systematic deviation as proof the basic law is wrong. These are predicted trends, not fabricated measurement results. Static diagrams show the models here; dynamically adjustable field maps and insertion simulations would require additional application support.

QuantityDimensions using electric current ISI unit
PotentialM L² T⁻³ I⁻¹V
CapacitanceM⁻¹ L⁻² T⁴ I²F
PolarisationL⁻² I TC m⁻²
Relative permittivityDimensionless1

Quick Quiz

Quiz

Quick check

A negative particle moves freely to higher potential. Which statement is correct?

Explanation

qΔV is negative, so electric work and kinetic-energy gain are positive.

Quick check

An isolated capacitor is fully filled by a K = 4 dielectric at unchanged geometry. Its energy becomes

Explanation

Q remains fixed, C becomes 4C₀ and Q²/(2C) becomes U₀/4.

Quick check

Two identical capacitors in series across V each have

Explanation

An initially uncharged equal series pair shares the terminal voltage equally and has reciprocal-sum capacitance C/2.

Quick check

A connected conductor in electrostatic equilibrium can have

Explanation

Field depends on potential differences; equilibrium makes the connected material equipotential.

Quick check

After two capacitors share charge, which must be conserved for an isolated connection?

Explanation

Charge moves between the capacitors but not off an isolated node; stored energy can be dissipated.

Practice Problems

Practice Problems
  1. Charges +5 × 10⁻⁸ C and −3 × 10⁻⁸ C lie at x = 0 and 0.16 m. Find all finite zero-potential positions on the line.
  2. A regular hexagon of side 0.10 m has +5 μC at every vertex. Find potential and field at the centre with k = 9 × 10⁹.
  3. An equal-and-opposite dipole has charges at x = ±0.03 m, with +q on the right. Identify a zero-potential plane and its field direction.
  4. An isolated sphere of radius 0.12 m has Q = 1.6 × 10⁻⁷ C. Find E inside, just outside and at r = 0.18 m, with k = 9 × 10⁹.
  5. An 8 pF air capacitor has its separation halved and is fully filled with K = 6 dielectric. Find C and compare voltage for fixed Q with charge for fixed V.
  6. Three 9 pF capacitors are in series across 120 V; a separate 3 pF capacitor is directly across the source in parallel with that branch. Find Ceq and every charge.
  7. For A = 6 × 10⁻³ m², d = 3 mm and V₀ = 100 V, find initial C and Q. Compare full K = 6 filling with the supply connected and disconnected.
  8. A full-area K = 6 slab has thickness 3d/4 in an isolated capacitor initially of capacitance 8 pF. Find capacitance and voltage ratio.
  9. A 12 pF capacitor is charged to 50 V. Find stored energy and work done by an ideal fixed-voltage source charging it from zero through a resistive path.
  10. A charged 600 pF capacitor at 200 V is joined to an empty equal capacitor after disconnection. Find final voltage, final plate-charge magnitudes and energy transfer.
  11. A dipole of moment 2 × 10⁻⁸ C m rotates slowly from alignment to anti-alignment in E = 500 N C⁻¹. Find external work and compare the stability of the endpoints.
  12. A 2 μF and 4 μF parallel pair is in series with 3 μF across 18 V. Calculate every stored energy and verify the equivalent-capacitor result.

With positive distances, solve 5/|x| = 3/|x − 0.16|. Between the sources, 5(0.16 − x) = 3x gives x = 0.10 m. To the right, 5(x − 0.16) = 3x gives x = 0.40 m. On the left the larger source is nearer, so no cancellation is possible. Source positions are excluded.

Key Takeaways

Key Takeaways

• Potential, electric work and the field gradient describe one electrostatic configuration. • Keep charge signs and the reference explicit in all potential-energy calculations. • Count mutual interactions once and exclude self-potential. • Conducting equilibrium makes the material equipotential and field-free. • Polarisation separates bound charge without requiring conduction. • Geometry and dielectric response determine capacitance. • Electrical connections decide whether Q or V is fixed. • Include battery, mechanical and dissipative energy transfers when applying conservation.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…