Electrostatic Potential and Capacitance · Lesson 1 of 11
Electric Potential, Work and Potential Energy
“Connect electric work, potential difference and energy, then derive and apply the potential of a point charge.”
• Calculate potential difference from work per unit charge. • Distinguish potential from potential energy and field work from external work. • Derive point-charge potential with a stated reference. • Use conservation of energy for positive and negative charges.
Why a charge can gain speed without being pushed by hand
Release a positive charge near another positive charge and it accelerates away. Electric potential energy decreases while kinetic energy increases. If instead you move it slowly closer, an external agent must oppose the repulsion. The work you supply increases the energy of the interacting system. This is the electrical counterpart of lifting a mass, but electric forces may attract or repel. Always identify both the moving charge and the charges creating the field.
Recall that work is the force component along displacement multiplied by displacement, summed along the path. In a static electric field, work between two fixed points is independent of path: the electric force is conservative. Consequently the field does zero net work around a closed path. Moving slowly is useful for measuring energy changes because the kinetic energy then stays unchanged; it is not a requirement for potential to exist.
Potential belongs to the source configuration
A larger test charge needs proportionally more work for the same journey. Dividing the energy change by its signed charge removes this dependence. Potential difference is therefore energy change per unit charge, measured in J C⁻¹, called the volt. Potential is a scalar: it has an algebraic sign but no spatial direction. Potential energy belongs to the interacting configuration and depends on the charge placed there. Use an infinitesimal test charge, or hold source charges fixed, so the measurement does not change the field.
| Quantity | Meaning | SI unit |
|---|---|---|
| Electric field E | Force per unit positive test charge; vector | N C⁻¹ or V m⁻¹ |
| Potential V | Potential energy per unit charge for a chosen reference; scalar | V = J C⁻¹ |
| Potential energy U | Energy associated with interactions | J |
Choosing zero and deriving point-charge potential
Only potential differences determine work. Adding the same constant to V everywhere changes no force or energy difference. For an isolated finite charge distribution it is convenient to set V = 0 infinitely far away. This convention is not available for every idealised distribution: a uniform field extending to infinity cannot have a finite zero there. In that case choose a finite reference point.
For a point source Q at the origin in vacuum, use radial coordinate r measured outwards. Coulomb’s law gives radial field Er = kQ/r², where k = 1/(4πε₀) ≈ 8.99 × 10⁹ N m² C⁻². The field does positive work per unit positive charge on an outward displacement when Q is positive. Potential therefore decreases outwards. Integrate the negative field from infinity to r; the antiderivative of 1/s² is −1/s.
Problem
Find V at 0.20 m from Q = +4.0 nC and the slow external work to bring q = −2.0 nC there from infinity. Use k = 9.0 × 10⁹.
- 1.V = kQ/r = (9.0 × 10⁹)(4.0 × 10⁻⁹)/0.20 = +180 V. The source determines this value before the test charge is introduced.
- 2.Wext = qV = (−2.0 × 10⁻⁹)(180) = −3.6 × 10⁻⁷ J. The field does +3.6 × 10⁻⁷ J.
- 3.Negative external work means the external agent removes energy while restraining attraction. If the particle moves freely from rest, the same energy decrease supplies kinetic energy.
Predict signs before calculating
A positive freely moving charge accelerates towards lower potential; a negative one accelerates towards higher potential. Both lower their potential energy. Thus “charges always move from high to low potential” is incomplete. A negative potential does not mean zero energy or zero field, and changing the zero reference does not change the motion.
Problem
An electron moves freely through a potential increase of 200 V. Find its kinetic-energy gain.
- 1.Its charge is −e, with e = 1.602 × 10⁻¹⁹ C. Therefore ΔU = −e(200 V).
- 2.ΔK = −ΔU = 3.20 × 10⁻¹⁷ J = 200 eV. One electron-volt is an energy, e × 1 V = 1.602 × 10⁻¹⁹ J; it is not a voltage.
- 3.The electron gains speed while moving to higher potential because its charge is negative.
Quick Quiz
Quiz
What is one volt?
Potential difference is energy change divided by charge, so 1 V = 1 J C⁻¹.
For slow motion, external work is −6 μJ. What is the change in potential energy?
With no kinetic-energy change, external work equals ΔU.
A negative charge moves to higher potential under electric force alone. Its potential energy
ΔU = qΔV is negative when q < 0 and ΔV > 0.
At twice the distance from an isolated fixed point charge, potential relative to infinity becomes
V = kQ/r varies inversely with r, including its sign.
Which reference change leaves all electric forces unchanged?
A uniform additive constant cancels from every potential difference and has zero spatial derivative.
Practice Problems
- A charge +3 μC moves from 20 V to −40 V. Find ΔU, field work and slow external work.
- Find potential 0.30 m from a −6 nC charge using k = 9 × 10⁹, then potential energy of a +2 nC test charge there.
- Derive the work done by the field on q moving radially from r₁ to r₂ near fixed Q.
- An electron gains 50 eV from rest under electric force. Find ΔV and energy in joules.
- An external agent does 8 μJ while the electric field does −3 μJ. Find ΔK and ΔU.
ΔV = −40 − 20 = −60 V. Thus ΔU = (3 × 10⁻⁶)(−60) = −180 μJ. Field work is +180 μJ and slow external work is −180 μJ. The signs express energy released by the system.
Key Takeaways
• Potential difference is energy change per unit signed charge. • Potential is a scalar; electric field is a vector. • Field work equals −ΔU; external work equals ΔU only when kinetic energy is unchanged. • With infinity as zero, a point charge produces V = kQ/r. • Negative charges lower their potential energy by moving towards higher potential. • An electron-volt is a unit of energy.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…
Previous
Start of chapter
Next · Lesson 2
Superposition and Electric Dipole Potential