Current Electricity · Lesson 2 of 10
Drift, Mobility and Conductivity
“Use a relaxation-time model to connect microscopic acceleration and scattering to steady drift and macroscopic conductivity.”
• Derive electron drift velocity in the relaxation-time model. • Relate mobility, current density, conductivity and resistivity. • Estimate carrier density and drift speed from material data. • State the model assumptions and distinguish random motion, drift and signal propagation.
Why a steady current does not require constant acceleration
An electric field exerts a force on an electron, so why does a wire settle to a steady current rather than an ever-increasing one? The electron accelerates between scattering events, but interactions with lattice vibrations, defects and impurities continually randomise its directed motion. The ensemble average can therefore reach a steady drift even while individual electrons repeatedly change velocity. A smooth mean drift is compatible with irregular microscopic motion.
A classical relaxation-time model represents this complex process by one characteristic time τ over which directed momentum is lost. It treats the carriers using Newton’s law between events and replaces the detailed scattering by a statistical average. It is a useful transport model, not a complete account of quantum electrons in a crystal. In particular, the large random electron speeds in a metal should not be calculated by applying a classical room-temperature gas formula to the electrons. Lattice atoms and conduction electrons have different velocity statistics.
Deriving the drift relation
Start with the force −e𝐄 = m𝐚. An electron whose post-scattering velocity was 𝐮 and whose time since that event is tᵢ has velocity 𝐮 − (e/m)𝐄tᵢ in a uniform field. The unbiased post-scattering velocities average to zero. In the simple memoryless relaxation model the average elapsed time relevant to transport is τ, giving the stated drift relation. This equality depends on the statistical model; it is not true for every possible distribution of collision times. An equivalent mean equation is m d𝐯_d/dt = −e𝐄 − m𝐯_d/τ. Setting its time derivative to zero gives the same steady result.
The field continually gives the electrons directed momentum; scattering continually transfers momentum and energy to the material. If τ were indefinitely large, the finite-resistance steady-drift result would cease to describe the system: the model would predict acceleration rather than ordinary resistive transport. Between idealised events the trajectory is straight without a field and generally curved under a field. The common zigzag drawing approximates those short curves by straight segments; it is schematic, not a literal tracked quantum-electron trajectory.
Mobility describes the response per field
Mobility μ is defined as the positive drift-speed magnitude divided by field magnitude, for a stated carrier and transport regime. Because it is a magnitude ratio, electron mobility is positive even though electron drift is opposite the field. For a positive carrier the direction reverses relative to electron drift. At weak fields the mobility can be approximately independent of field; strong-field behaviour need not remain linear.
The two minus signs—negative electron charge and opposite drift—cancel, so current density points along 𝐄. Conductivity measures current-density response to the local field; it does not depend on the particular length of a uniform sample. Its reciprocal, resistivity ρ, describes the field needed for a given current density. Do not confuse resistivity ρ with a charge density using the same Greek letter in another context.
The units provide a useful check: μE has units (m² V⁻¹ s⁻¹)(V m⁻¹) = m s⁻¹. For σE, (S m⁻¹)(V m⁻¹) = A m⁻², the units of current density. One m² V⁻¹ s⁻¹ equals 10⁴ cm² V⁻¹ s⁻¹, so converting a mobility quoted in cm² V⁻¹ s⁻¹ to SI requires multiplication by 10⁻⁴.
Problem
Let τ = 2.5 × 10⁻¹⁴ s, n = 8.5 × 10²⁸ m⁻³ and E = 0.10 V/m. Use e = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg.
- 1.μ = eτ/m = 4.39 × 10⁻³ m² V⁻¹ s⁻¹; drift speed is μE = 4.39 × 10⁻⁴ m/s opposite E.
- 2.σ = neμ = 5.97 × 10⁷ S/m, hence ρ = 1.67 × 10⁻⁸ Ω m.
- 3.j = σE = 5.97 × 10⁶ A/m². Through 1.0 × 10⁻⁶ m², I = jA = 5.97 A along E. All values follow the same model assumptions.
Estimating the number of carriers
If a metal contributes z conduction electrons per atom, a useful estimate is n = z(d/M)N_A, where d is mass density in kg/m³, M is molar mass in kg/mol and N_A is Avogadro’s constant. The factor d/M gives moles per cubic metre. This estimate requires a justified carrier count per atom and is not automatically accurate for all metals or semiconductors.
Problem
Estimate n and drift speed using d = 9.0 × 10³ kg/m³, M = 0.0635 kg/mol, z = 1, A = 1.0 × 10⁻⁷ m² and I = 1.5 A.
- 1.n = (9.0 × 10³/0.0635)(6.022 × 10²³) = 8.53 × 10²⁸ m⁻³. Then v_d = I/(neA) ≈ 1.10 × 10⁻³ m/s.
- 2.For comparison, the classical rms vibrational-speed estimate for copper atoms at 300 K is √(3k_BT/M_atom) ≈ 343 m/s; a one-component characteristic speed √(k_BT/M_atom) is about 198 m/s. Specify which speed is meant. Neither is the electron drift speed.
- 3.Electromagnetic signals in many wire arrangements propagate at order 10⁸ m/s. These are three different quantities: atomic random motion, electron net drift and signal propagation.
Using and limiting the model
Predict what happens when τ halves at fixed n and E. Each carrier retains directed momentum for less time, so drift speed, mobility and conductivity halve; resistivity doubles. At fixed current density instead, twice the field would be needed. The controlled quantity matters. A complete quantum treatment is needed for quantitative electron statistics and many detailed temperature effects, but the transport relationships still provide a coherent bridge between measurements and a physical mechanism.
Quick Quiz
Quiz
In the relaxation-time model, doubling τ at fixed E makes drift speed
Explanation: The steady drift magnitude is eEτ/m.
Electron mobility is
Explanation: μ = |v_d|/E is positive and has units m² V⁻¹ s⁻¹.
Which relation gives conductivity for this model?
Explanation: Substitute electron drift into 𝐣 = −ne 𝐯_d.
A finite steady drift despite a nonzero force is explained by
Explanation: The mean momentum gain from the field balances relaxation to the material.
A mobility of 2000 cm²/(V s) equals
Explanation: One square centimetre is 10⁻⁴ square metres; 2000 × 10⁻⁴ = 0.20.
Practice Problems
- Use τ = 1.0 × 10⁻¹⁴ s and E = 0.20 V/m to find electron drift velocity along an x-directed field.
- A material has n = 5.0 × 10²⁸ m⁻³ and μ = 4.0 × 10⁻³ m²/(V s). Find σ and ρ.
- If carrier density triples and relaxation time halves, compare conductivity and resistivity with their initial values.
- Derive n = z(d/M)N_A and check its units.
- Why is a drawing of identical repeated straight electron paths misleading in an applied field?
Using e = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg, v_d,x = −eEτ/m = −3.51 × 10⁻⁴ m/s. The negative sign is essential: electron drift is in −x while conventional current is in +x.
Key Takeaways
• Electrons accelerate between scattering events, while their average drift can be steady. • The relaxation-time model gives 𝐯_d = −(eτ/m)𝐄. • Mobility is the positive ratio of drift speed to field magnitude. • For the stated model, σ = ne²τ/m = neμ and ρ = 1/σ. • Current density points along E in an isotropic ohmic metal. • Carrier-density estimates require an assumed mobile-carrier count. • Random atomic motion, electron drift and signal propagation are different speeds.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…