Current Electricity · Lesson 7 of 10
Combining Cells
“Derive equivalent sources for series and parallel cells and use signed branch currents to recognise charging and circulating currents.”
• Derive equivalent emf and internal resistance for series cells. • Derive the parallel-source relation for unequal cells with finite internal resistances. • Compare identical-cell arrangements for a specified load. • Interpret negative branch currents and open-circuit circulation.
A combination is defined by its terminal behaviour
Two source arrangements are equivalent for an external load if they give the same relation between terminal voltage V and load current I. An equivalent source is therefore not found by adding emfs indiscriminately. First identify which terminals are connected, mark polarities and specify a positive current direction. Ideal wires join points of one potential; they do not force cells connected in parallel to have the same individual emfs. Their branch currents adjust according to their internal resistances.
Series cells: the same current, signed emf rises
Connect the negative terminal of one cell to the positive terminal of the next. Along the internal current path of an aiding pair, the first emf contributes ε₁, the next ε₂ and the internal resistive drops are Ir₁ and Ir₂. Their total terminal voltage is (ε₁ + ε₂) − I(r₁ + r₂). Comparing with V = ε_eq − Ir_eq identifies the replacement. More generally, assign a sign to each emf according to its orientation along the chosen path; every positive physical resistance still adds.
Problem
Combine 2.0 V, 0.50 Ω and 1.0 V, 0.50 Ω cells with a 2.0 Ω load, first aiding and then opposing.
- 1.Aiding: ε_eq = 3.0 V and r_eq = 1.0 Ω. Current is 3.0/3.0 = 1.0 A and load voltage is 2.0 V.
- 2.Opposing: choose the stronger cell’s discharge direction. ε_eq = 2.0 − 1.0 = 1.0 V, still r_eq = 1.0 Ω. Current is 1/3 A.
- 3.The weaker cell receives current through its positive terminal in the opposing arrangement. Its emf absorbs ideal storage power, while its internal resistance still heats.
Parallel cells: the same voltage, different currents
Join positive terminals together and negative terminals together. Let V be the common positive-terminal voltage relative to the negative node, and I₁ and I₂ the currents each branch delivers out of its positive terminal. For the branches V = ε₁ − I₁r₁ and V = ε₂ − I₂r₂. Thus I₁ = (ε₁ − V)/r₁ and I₂ = (ε₂ − V)/r₂. At the output junction I = I₁ + I₂. These equations remain valid when a branch current is negative; that branch is absorbing current.
The units help check the result: ε/r is in amperes, multiplying its sum by r_eq gives volts. For equal r the emf is the arithmetic mean; if r₁ is much smaller than r₂, the first branch more strongly controls terminal voltage. As all r values tend to zero with unequal ideal emfs, a finite common terminal voltage cannot satisfy both ideal sources. That conflicting ideal limit cannot be repaired by simply averaging their emfs.
Problem
A 2.0 V cell and a 1.0 V cell each have 1.0 Ω internal resistance. Their like terminals are joined and a 2.0 Ω load is attached. Find all currents.
- 1.r_eq = 0.50 Ω and ε_eq = 1.50 V. Load current is 1.50/(2.0 + 0.50) = 0.60 A, so terminal V = 1.20 V.
- 2.I₁ = (2.0 − 1.20)/1.0 = 0.80 A; I₂ = (1.0 − 1.20)/1.0 = −0.20 A. Their signed sum is 0.60 A.
- 3.The stronger cell supplies the load and drives 0.20 A into the weaker cell. External heat is 0.72 W, internal heat is 0.64 + 0.04 = 0.68 W; net emf power is 2.0 × 0.80 − 1.0 × 0.20 = 1.40 W, matching the total heat.
Open output does not always mean every branch is idle
Remove the load from that unequal parallel pair. The total external current is zero, but V = ε_eq = 1.50 V gives branch currents +0.50 A and −0.50 A. Charge circulates through the two cells, dissipating energy internally and potentially charging an unsuitable cell. More generally the circulating magnitude for an unequal pair is |ε₁ − ε₂|/(r₁ + r₂). This follows directly from the closed loop formed by the two branches. Parallel connection of mismatched real batteries needs appropriate engineering; the calculation is an analysis of the model, not a recommendation to build it.
Identical cells and the load determine the useful arrangement
If R is much greater than Nr, series cells provide nearly N times the single-cell load current, while parallel cells provide little increase over a single cell. If R is much smaller than r/N, both arrangements approach a model total short-circuit current ε/r; series division by Nr cancels its N-fold emf, and parallel branch currents add. For finite positive R, a fixed set of N identical cells all in series gives at least as much current as all in parallel, although voltage requirements, per-cell loading, capacity and real current limits may favour another arrangement. Do not apply the slogan “parallel always gives more current” without specifying what is held fixed.
Problem
Four identical 1.5 V, 0.50 Ω cells drive a 10 Ω load. Compare all-series and all-parallel currents.
- 1.Series gives ε_eq = 6.0 V and r_eq = 2.0 Ω, hence I = 6/12 = 0.50 A.
- 2.Parallel gives ε_eq = 1.5 V and r_eq = 0.125 Ω, hence I = 1.5/10.125 = 0.148 A.
- 3.The series load voltage is 5.0 V; the parallel load voltage is about 1.48 V. These arrangements are not equal-voltage supplies, so the current comparison is load-specific.
Quick Quiz
Quiz
Reversing one cell in a series pair changes
Explanation: Emfs add algebraically according to polarity; positive internal resistances still add.
Four identical cells each with emf ε in parallel have emf
Explanation: Parallel branches share voltage; identical emfs remain ε.
For N identical parallel cells, equivalent internal resistance is
Explanation: The internal resistances are in parallel.
A calculated branch discharge current of −0.2 A means
Explanation: A negative value reverses the assumed discharge direction.
Unequal parallel cells with an open external output can have
Explanation: Their emf difference drives current around the internal closed loop when internal resistances are finite.
Practice Problems
- Three 2.0 V cells each with r = 0.20 Ω are in series with 5.4 Ω. Find current and terminal voltage.
- Two like-oriented cells, 3 V with 1 Ω and 2 V with 2 Ω, are in parallel. Find the equivalent source.
- For the pair in the previous problem, find open-output branch currents.
- Two 1.5 V cells have r = 0.30 Ω each. Compare current into 2.4 Ω for aiding series and like-oriented parallel connections.
- Why can unequal ideal voltage sources with zero internal resistance not simply be connected in parallel in this model?
For aiding cells ε_eq = 6.0 V and r_eq = 0.60 Ω. Current is 6.0/(5.4 + 0.60) = 1.0 A. Load voltage is 5.4 V, equal to 6.0 − 1.0 × 0.60 V.
Key Takeaways
• Equivalent sources reproduce the terminal V–I relation for the load. • Series emfs add with polarity signs; internal resistances add positively. • Parallel branches share terminal voltage and their signed currents add. • Parallel equivalent emf is weighted by branch conductance. • A negative discharge current identifies a branch receiving current. • Unequal parallel cells can circulate current with no external load. • Identical parallel cells retain ε and reduce r to r/N. • Compare arrangements only for a specified load and operating assumptions.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…