Current Electricity · Lesson 1 of 10
Current and Charge Transport
“Connect charge transfer, carrier motion and current density without confusing current with energy or drift with signal speed.”
• Calculate average and instantaneous current from charge transfer. • Distinguish conventional current from electron drift and identify mobile carriers. • Derive the relation between carrier density, drift speed and current. • Explain how a neutral conductor can carry current and why a closed circuit responds rapidly.
What an ammeter counts
A torch lights when its circuit is closed, but the cell does not send a new supply of electrons all the way to the lamp before light can appear. The wires and filament already contain mobile charges. Closing the circuit changes the electromagnetic field, which drives the local carriers. To describe the resulting transport, imagine a cross-section through a wire and choose one direction through it as positive. Current measures the signed net charge crossing that section per unit time. Random crossings in opposite directions cancel; the total distance travelled by all particles does not define current.
One ampere transfers one coulomb per second. In modern SI the elementary charge is fixed at e = 1.602176634 × 10⁻¹⁹ C exactly; the ampere is defined through this value and the second. For rounded calculations use e ≈ 1.60 × 10⁻¹⁹ C. A current arrow is a reference for positive charge transfer. A negative calculated current means that the actual conventional current is opposite to the arrow. Current is a signed scalar: at a bent wire or junction, currents combine by charge accounting rather than by the vector parallelogram rule.
Problem
The cumulative transfer is Q(t) = (2 C s⁻²)t² for 0 ≤ t ≤ 3 s. Find instantaneous current at 3 s and average current over the interval.
- 1.Differentiate Q: I(t) = (4 C s⁻²)t, so I(3 s) = 12 A.
- 2.The total transfer is Q(3) − Q(0) = 18 C. Average current is 18/3 = 6 A.
- 3.The instantaneous and average values differ because the current grows linearly; a triangle of height 12 A and base 3 s has area 18 C.
Which charges are moving?
A metal consists of a lattice of positive ion cores and mobile conduction electrons. The ions vibrate about their lattice positions; they do not drift through the wire in an ordinary steady circuit. In an electrolyte, both positive and negative ions can transport charge. Positive ions moving right and negative ions moving left both give conventional current to the right: multiplying negative charge by negative velocity gives a positive contribution. Never identify conventional current with electron motion in every material.
Without an applied driving field, conduction electrons have large disordered velocities, but their average transport velocity is zero. A field adds a small average drift to that motion. For electrons the electric force is opposite the field, so electron drift is opposite conventional current in a metal. Electrons are not all travelling in one direction at every instant. In a resistive metal the conventional current is along the local electric field and toward lower potential, whereas electron drift is toward higher potential. The negative electron charge makes its electric potential energy decrease in that motion.
From microscopic transport to a measured current
Let n be the number of mobile electrons per unit volume, A the uniform wire cross-sectional area and v_d the positive drift-speed magnitude. During a short interval Δt, the net transport is equivalent to sweeping a length v_dΔt through the section. The swept volume is Av_dΔt, the net number of electron charges transported is nAv_dΔt, and the charge magnitude is neAv_dΔt. Dividing by Δt gives the current magnitude. This is a statistical net transport argument, not a claim that every electron within that slice follows a straight path across the section.
Current density is a vector because it describes local charge flux and its direction. Total current through a specified surface is a scalar dot-product integral. For several carrier types, add nₛqₛ𝐯ₛ for each type. In a nearly neutral metal the stationary positive lattice charge cancels the electron charge density, but not its transport: the ions have essentially zero drift. Therefore zero net charge density does not imply zero current. Using total net charge density times electron velocity would incorrectly predict no current.
Problem
Use n = 8.5 × 10²⁸ m⁻³ and A = 2.0 × 10⁻⁶ m² to find drift speed and nominal drift time over 3.0 m.
- 1.v_d = I/(neA) = 3.0/[(8.5 × 10²⁸)(1.60 × 10⁻¹⁹)(2.0 × 10⁻⁶)] = 1.10 × 10⁻⁴ m s⁻¹.
- 2.The drift-time estimate L/v_d is 2.72 × 10⁴ s, or 7.56 h. This is an average transport timescale, not the exact first-arrival time of a tagged electron.
- 3.The circuit responds far sooner because field changes propagate through its electromagnetic environment, typically at a substantial fraction of c, rather than at the drift speed. The precise signal speed depends on geometry and surrounding materials; it is not universally c.
Maintaining the field
A brief charge imbalance at the ends of an isolated conductor can start a transient current, but redistribution removes the driving field and the current dies away. A source uses another form of energy, such as chemical energy, to maintain charge separation and a driving field in a complete conducting path. Surface-charge distributions help establish that field along the circuit. A steady resistive wire is not in electrostatic equilibrium: its interior field is nonzero. Current is not consumed in a lamp; the charge continues around the circuit while electrical energy is transferred to the filament and surroundings.
Predict the effect of narrowing a steady single-carrier wire without changing its current. Charge cannot accumulate indefinitely at the narrowing, so the current remains equal through each section. With n fixed, v_d and j increase inversely with area. This resolves an apparent conflict: equal currents do not require equal drift speeds in sections with different areas.
Quick Quiz
Quiz
Two coulombs cross a section in 4 s at steady rate. Current is
Explanation: I = Q/t = 0.5 C s⁻¹.
In a resistive metal, electron drift is
Explanation: An electron has negative charge, so its electric force and drift are opposite E.
A wire is electrically neutral overall. It can carry current because
Explanation: Net charge density and charge flux are different quantities; stationary positive charges do not cancel electron transport.
At fixed I and n, halving wire area makes drift speed
Explanation: I = neAv_d requires Av_d to remain fixed.
The signed area under an I–t graph gives
Explanation: Integrating charge-transfer rate over time gives net transferred charge.
Practice Problems
- A steady current is 0.80 A for 5.0 min. Find charge transfer and the number of electron charges.
- A current rises linearly from zero to 4.0 A in 3.0 s, then stays at 4.0 A for 2.0 s. Find total charge.
- A wire changes area from A to A/3 while n and steady current stay fixed. Compare j and v_d.
- Positive ions cross right at a charge-transfer rate of 0.30 C/s, while negative ions cross left at 0.20 C/s in magnitude. Find conventional current to the right.
- Explain why a lamp can respond rapidly even when electron drift over one metre takes hours.
Convert time to 300 s. Q = It = 0.80 × 300 = 240 C. The number is Q/e ≈ 240/(1.60 × 10⁻¹⁹) = 1.50 × 10²¹. These are net electron-charge transfers through the section; energy is not measured in coulombs.
Key Takeaways
• Current is the signed rate of net charge transfer, measured in amperes. • Conventional current is opposite electron drift in a metal. • Random motion can be large while its net current is zero. • For uniform single-carrier transport, I = neAv_d. • Current density is a vector; current through a chosen surface is a scalar. • Electrical neutrality does not prevent a current. • Field propagation and electron drift have different speeds.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…
Previous
Start of chapter
Next · Lesson 2
Drift, Mobility and Conductivity