Skip to lesson content

Lesson 9 of 11

Electric Charges and Fields · Lesson 9 of 11

Gauss’s Law

“Connect enclosed net charge to closed-surface flux while separating universal validity from symmetry-based field calculation.”

Learning Objectives

• State Gauss’s law with a closed surface and outward normals. • Derive its centred-point-charge illustration from Coulomb’s law. • Distinguish enclosed charge from all charges contributing to surface E. • Calculate flux and enclosed charge for spheres, cubes and nonuniform fields.

A striking cancellation of distance

Imagine a point charge q at the centre of a sphere of radius r. The electric field magnitude decreases as 1/r², but the sphere’s area grows as r². Their product does not depend on radius. For positive q, the radial field and outward normals agree everywhere; for negative q they oppose. Using a signed radial component preserves both cases.

Centred-point-charge illustrationLaTeX
This proves the result for this geometry. It is an illustration, not by itself a proof for every possible surface and charge distribution.
Gauss’s lawLaTeX
S must be closed and dA points outward. Q_enclosed is the algebraic sum of charges inside. E is the total field from charges both inside and outside.

What is universal and what needs symmetry?

Gauss’s law holds for any closed surface, whatever its shape, and does not require symmetry. A Gaussian surface is an imaginary mathematical boundary, not necessarily a physical conductor. Move an enclosed point charge off-centre and the field strength and angles vary across the surface, but the total flux remains q/ε₀. Change a sphere to a distorted closed shape without passing it through the charge, and the same total remains. Avoid placing an ideal discrete point charge directly on the surface: its singular field makes the simple inside/outside statement ill-defined.

Only additional symmetry lets us replace the flux integral by a convenient product involving one unknown E. A cube around a centred point charge has equal total flux through its six faces by rotational symmetry, but E is not constant in magnitude or normal direction across a face. Therefore total face flux is q/(6ε₀), while E at a face centre is not obtained by dividing that face flux by its area and calling it the local field. That quotient is an average normal component.

External charges contribute field but zero net flux

A charge outside a closed surface can produce strong fields on it. Its lines enter and leave, producing cancelling signed flux contributions. Thus external sources contribute zero total closed-surface flux, but their field cannot be erased from the integrand. Gauss’s law with Q_enclosed = 0 implies only zero net flux, not an empty interior or zero local field. An enclosed dipole has zero net charge and flux while still producing a field.

Read charge from flux

Problem
An arbitrary sealed box has measured net outward flux +8.0 × 10³ N m² C⁻¹. Find net enclosed charge.

  1. 1.Rearrange Gauss’s law: Q = ε₀Φ = 8.854 × 10⁻¹² × 8.0 × 10³ = 7.08 × 10⁻⁸ C.
  2. 2.The positive flux implies positive net enclosed charge. It does not determine the number, signs or positions of individual internal charges. If flux were zero, there might be no charges or cancelling positive and negative totals.

An open square is not a Gaussian surface

Centred charge: equal integrated flux through six cube faces+Each face: q/(6ε₀), although E varies across a face
A cube gives a useful flux-sharing construction— Perspective schematic. Face equality concerns integrated flux, not constant field magnitude on each face.
Complete the cube before using Gauss’s law

Problem
A +6.0 nC point charge is 5.0 cm directly above the centre of a square of side 10 cm. Find the magnitude of flux through the square.

  1. 1.The square can be one face of a cube of side 10 cm with the charge at the cube centre. The full cube encloses +6.0 nC, so its total flux is q/ε₀.
  2. 2.By the symmetry of a centred charge and cube, all six faces have equal flux magnitude. Each is q/(6ε₀) = 6.0 × 10⁻⁹/(6 × 8.854 × 10⁻¹²) ≈ 113 N m² C⁻¹.
  3. 3.The square’s signed flux depends on its chosen normal. Gauss’s law was applied to the completed closed cube, not directly to the open square.

Calculate flux first when the field is known

A field that grows with x

Problem
A cube extends from x = a to x = 2a with side a = 0.10 m. The field is Eₓ = α√x, Eᵧ = E_z = 0, where α = 800 N C⁻¹ m⁻¹ᐟ². Find flux and enclosed charge.

  1. 1.The four faces with normals along y or z have zero flux. On each x face, x is constant, so E is constant across that face. Their outward normals point in opposite directions.
  2. 2.Φ = a²[Eₓ(2a) − Eₓ(a)] = αa⁵ᐟ²(√2 − 1) ≈ 1.048 N m² C⁻¹.
  3. 3.Q = ε₀Φ ≈ 9.28 × 10⁻¹² C. The positive difference of right and left normal flux indicates positive net enclosed charge. The α units are necessary to make E have N C⁻¹ units.
Both end fluxes can be positive

Problem
A cylinder of radius 0.050 m straddles x = 0 with its axis along x. E = +200 i-hat N C⁻¹ on the right and −200 i-hat N C⁻¹ on the left. Find its total flux.

  1. 1.Each end has area A = π(0.050)². At both ends E points along the respective outward normal, so each flux is +200A ≈ 1.571 N m² C⁻¹.
  2. 2.The field is tangent to the curved side, giving zero side flux. Total Φ = 400A ≈ 3.142 N m² C⁻¹; Q = ε₀Φ ≈ 2.78 × 10⁻¹¹ C.
  3. 3.Opposite field directions do not automatically cancel flux, because the outward normals also reverse.

A checklist before solving for field

Identify the charge distribution and its actual symmetries, choose a closed surface that uses those symmetries, determine E·n on each part, and compute enclosed charge. Only factor E out on a part where its required component is constant. A convenient-looking Gaussian surface cannot manufacture symmetry absent from the sources. Flux has dimensions N m² C⁻¹, and ε₀ times flux has C; these checks help catch missing areas or extra distances.

Quick Quiz

Quiz

Quick check

Gauss’s law requires

Explanation: Any closed shape is allowed; symmetry is not required for validity.

Quick check

E in the flux integral includes fields from

Explanation: External sources affect local E but give zero net closed-surface flux.

Quick check

Zero net flux establishes

Explanation: Equal opposite internal charges can have zero net charge.

Quick check

For a centred point charge inside a cube, flux through one face is

Explanation: The six equal face contributions sum to q/ε₀.

Quick check

Moving an enclosed point charge off-centre without crossing the surface changes total flux by

Explanation: Total flux depends on enclosed charge, not its internal location.

Practice Problems

Practice Problems
  1. A −2.0 nC charge is enclosed by a sphere. Find flux, then double the sphere radius.
  2. A box encloses +5 nC and −5 nC. Another +20 nC charge is outside. What does Gauss’s law imply?
  3. A +10 μC point charge is 5 cm above a square of side 10 cm. Find flux magnitude through the square using a symmetry construction.
  4. A uniform E = 3000 i-hat N C⁻¹ acts on a cube of side 0.20 m. Find each nonzero face flux and the total.
  5. Why can’t E at an arbitrary point on a cube face be calculated as q/(6ε₀A) for a point charge at the cube centre?

Φ = q/ε₀ = −2 × 10⁻⁹/(8.854 × 10⁻¹²) ≈ −226 N m² C⁻¹. Doubling radius does not change flux as long as the same charge is enclosed. For a centred charge the radial field magnitude becomes one quarter while area becomes four times larger.

Key Takeaways

Key Takeaways

• Gauss’s law relates closed-surface flux to enclosed net charge. • It is valid without symmetry. • E includes all sources, while Q_enclosed includes only internal charges. • Zero flux does not require zero local field or an empty interior. • Open surfaces need a separate construction or flux calculation. • Symmetry is needed to extract a simple local-field formula from the flux law.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…