Skip to lesson content

Lesson 4 of 11

Electric Charges and Fields · Lesson 4 of 11

Electric Fields and Charged-Particle Motion

“Separate a source-created vector field from the force and motion of a test charge.”

Learning Objectives

• Define electric field using a sufficiently small test charge. • Compute point-charge fields and combine them as vectors. • Predict force direction and acceleration for positive and negative particles. • Derive uniform-field travel and deflection relations under explicit assumptions.

Describing the electrical environment

A fixed source charge changes the electrical environment around it. To describe that environment, ask what force a small positive test charge would feel at a chosen point. Dividing the force vector by the test charge gives the electric field. Removing the test charge does not remove the source field. “Unit positive charge” means force per coulomb, not that we must actually place an enormous +1 C charge there. A practical test must be small enough not to move or substantially redistribute the sources.

Field definition and force lawLaTeX
The limiting definition describes an undisturbed source configuration. E has SI units N C⁻¹. A positive test charge feels force along E; a negative one feels force opposite E.
Field of a stationary point source at the originLaTeX
Q is signed. The unit vector r-hat points from source to observation point. Magnitude is k|Q|/r²; outward for Q > 0 and inward for Q < 0.

Spherical symmetry means the field magnitude is the same at every point a fixed distance from the source, but the vector directions differ around that sphere. The ideal source’s own location is excluded because its field expression is singular there. When finding force on a member of a charge collection, use the field of the other charges, not its own Coulomb field.

Add fields first, then choose a test particle

Field from several fixed point chargesLaTeX
Each rᵢ is a source position; r is the observation position. This field is independent of the charge later used to test it.
Opposite charges at a midpoint

Problem
Place +10 nC at x = −0.05 m and −10 nC at x = +0.05 m. Find E at the origin and the force on a −2.0 nC test charge.

  1. 1.Each field has magnitude (9 × 10⁹)(10⁻⁸)/(0.05)² = 3.6 × 10⁴ N C⁻¹. Both point along +x: away from the positive source and toward the negative source.
  2. 2.E = +7.2 × 10⁴ i-hat N C⁻¹. The negative test charge feels F = qₜE = −1.44 × 10⁻⁴ i-hat N.
  3. 3.The source charges have zero sum, yet their fields at this point add. Changing the test charge changes force, not this fixed source field.
A point outside and a point off the joining line

Problem
For the same sources, find E at B = (−0.10 m,0) and at C = (0,√3 × 0.05 m).

  1. 1.At B the positive-source field is −3.6 × 10⁴ i-hat N C⁻¹. The negative-source field is +(9 × 10⁹)(10⁻⁸)/(0.15)² i-hat = +4.0 × 10³ i-hat. Total: −3.2 × 10⁴ i-hat N C⁻¹.
  2. 2.At C each source is 0.10 m away, giving magnitude 9.0 × 10³ N C⁻¹. Vertical components cancel; each horizontal component is half its magnitude. Total: +9.0 × 10³ i-hat N C⁻¹.
  3. 3.Resolve using the actual source-to-point directions. The fact that C is on a perpendicular bisector cancels only one component, not the entire field.

Motion depends on both charge and mass

A uniform electric field has the same vector at every point in the region. If other forces are negligible and speeds remain nonrelativistic, a particle of constant mass has constant acceleration a = qE/m. Charge sign fixes acceleration direction; mass fixes its magnitude for a given charge. An electron entering a field with an initial velocity can initially move against its acceleration, just as a thrown ball can rise while accelerating down. Force direction is not automatically velocity direction.

Uniform-field motion from rest over distance hLaTeX
This time relation assumes initial rest, displacement in the force direction, constant E, and negligible other forces. It follows from h = |a|t²/2.
Electron and proton travel times

Problem
An electron starts from rest and travels 1.5 cm downward in an upward field of magnitude 2.0 × 10⁴ N C⁻¹. Reverse E and release a proton. Compare times.

  1. 1.The electron’s negative charge makes its force downward; the reversed field gives the positive proton a downward force. Both force magnitudes are eE = 3.20 × 10⁻¹⁵ N.
  2. 2.With h = 0.015 m, tₑ = √(2hmₑ/eE) ≈ 2.92 × 10⁻⁹ s; tₚ ≈ 1.25 × 10⁻⁷ s.
  3. 3.Their acceleration magnitudes are about 3.51 × 10¹⁵ and 1.92 × 10¹² m s⁻², both vastly larger than g. Unlike ideal gravitational free fall, the travel time depends on mass when |q| is fixed. Electron final speed is about 1.03 × 10⁷ m s⁻¹, small compared with c, so a nonrelativistic approximation is reasonable here.

Deflection in a transverse field

Trajectory with initial velocity u along +xLaTeX
Take initial y = 0 and initial vertical velocity zero. Eᵧ is the signed uniform y component; there is no x-directed force. This is a parabola only inside the uniform-field region.

Combining Newton’s second law with separate x and y kinematics produces the trajectory. It is not derived by assuming particles follow drawn field lines. When comparing track curvature to infer |q|/m, the incoming speeds and travel lengths must be equal or separately known: y at fixed x is proportional to (q/m)/u². More deflection alone does not uniquely determine a larger charge-to-mass ratio.

E downwardinitial u−force upward
Deflection of a negative charge in a downward field— Trajectory is schematic. A negative particle accelerates opposite E; horizontal velocity remains constant.

Why use a field at all?

The field lets us calculate the environment once and then find forces on many different particles. Beyond electrostatics it has deeper significance: a change in a distant source does not alter another location instantaneously. Electromagnetic changes propagate at finite speed and fields can transport energy. The stationary Coulomb formulas used here do not describe arbitrary accelerated sources at all times. Charge is invariant between inertial frames even though other scalar quantities, such as kinetic energy, can change with frame; scalar character and invariance are distinct ideas.

Quick Quiz

Quiz

Quick check

Replace a positive test charge by a negative one at the same point with fixed sources. E

Explanation: The source field is unchanged; the test force reverses.

Quick check

A negative charge in a field directed right experiences electric force

Explanation: F = qE reverses E for q < 0.

Quick check

At equal distance from one point charge, E has the same

Explanation: Its radial direction changes around the sphere.

Quick check

A particle initially moving across a uniform field must

Explanation: Velocity need not be parallel to acceleration.

Quick check

Deflection at a fixed travel length determines |q|/m only if

Explanation: The trajectory coefficient contains |q|/(mu²).

Practice Problems

Practice Problems
  1. A +4.0 nC source is 0.20 m from a point. Find field magnitude and force on −3.0 nC there.
  2. A proton is at rest in E = 1.0 × 10³ i-hat N C⁻¹. Find its acceleration, neglecting gravity.
  3. Derive the trajectory for a particle entering along +x at speed u with zero initial y velocity in constant Eᵧ.
  4. Two particles with equal incoming speeds and path lengths have deflection magnitudes in ratio 3:1 in the same uniform transverse field. What can be inferred? What if speeds differ?
  5. Charges +3.0 μC and −3.0 μC are 0.20 m apart. Find midpoint field and force on −1.5 nC.

E = 9 × 10⁹ × 4 × 10⁻⁹/0.20² = 900 N C⁻¹, away from the positive source. F magnitude = 3 × 10⁻⁹ × 900 = 2.7 × 10⁻⁶ N, directed toward the source because the test charge is negative.

Key Takeaways

Key Takeaways

• Electric field describes fixed sources and exists without a test particle. • E is a vector with unit N C⁻¹. • A negative test charge feels force opposite E. • Fields superpose before the test charge is chosen. • Uniform electric force gives acceleration qE/m under the stated assumptions. • A particle’s trajectory need not follow a field line. • Track comparisons require control of initial speeds and geometry.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…