Skip to lesson content

Lesson 8 of 11

Electric Charges and Fields · Lesson 8 of 11

Continuous Charge and Electric Flux

“Build smooth charge-density models and define flux through oriented surfaces.”

Learning Objectives

• Distinguish linear, surface and volume charge density and their SI units. • Construct charge and electric-field sums for continuous distributions. • Define a surface area vector and calculate signed electric flux. • Interpret surface integrals as limits of sums and explain why flux is not material flow.

From individual electrons to smooth densities

A charged wire contains far too many microscopic carriers to list individually. Instead, divide it into short segments, each small relative to the wire’s overall scale but containing many carriers. The average excess charge per length defines a smooth linear density λ. This is a macroscopic model: it does not assert that an electron can be cut into arbitrary charge pieces. For a surface use charge per area σ; for a volume use charge per volume ρ. All three can be negative and can vary with position.

Charge elements and total chargeLaTeX
λ has unit C m⁻¹, σ has C m⁻² and ρ has C m⁻³. The equality indicates alternative models, not that the same density applies simultaneously to every object.

For a uniform thin wire Q = λL. For a uniform sheet Q = σA. For a uniform solid Q = ρV. For nonuniform density, sum the local density times each small length, area or volume element. The integral symbol means the limiting sum. Do not replace a spatially varying density by its value at one convenient point unless an average has been justified.

Use geometry to find enclosed charge

Problem
A uniformly charged thin spherical shell has radius 0.10 m and σ = 2.0 μC m⁻². Find Q. Compare with a solid sphere of the same radius and ρ = 2.0 μC m⁻³.

  1. 1.For the shell, charge is on area 4πR². Q = 2.0 × 10⁻⁶ × 4π × 0.10² = 2.51 × 10⁻⁷ C.
  2. 2.For the solid, charge fills volume 4πR³/3. Q = 2.0 × 10⁻⁶ × 4π × 0.10³/3 = 8.38 × 10⁻⁹ C.
  3. 3.The density numbers have different units and are not the same physical quantity. A shell and a filled sphere have different enclosed-charge functions.

Superposition becomes a sum over charge elements

Continuous-source fieldLaTeX
R is the observation position; r′ labels a source element. Each dq contributes its Coulomb field. The unit vector and separation generally vary throughout the integral.

Choose a source element, write its charge from the appropriate density, draw the source-to-observation direction, and resolve its field into components before summing. The field includes every source element, not only those nearest the point. Symmetry may cancel components and simplify the sum. In practice, full integration can be difficult; Gauss’s law will offer another route for especially symmetric sources. A smooth volume density can have a finite field within the material; an ideal point-source field is singular at its point, and an ideal surface sheet can have a jump across the surface.

Flux begins with orientation

Imagine a flat window in a uniform field. A field perpendicular to the window crosses it most directly; a field parallel to it has no normal component. To express orientation mathematically, assign an area vector A = A n-hat perpendicular to the plane. A plane has two possible unit normals. For an open surface choose and state one; reversing it reverses signed flux. For a closed surface, use the outward normal at every point. Curved surfaces are divided into small approximately planar patches, each with its own normal.

Flux through a flat surface in a uniform fieldLaTeX
θ is the angle between E and the chosen normal, not between E and the plane. Flux unit is N m² C⁻¹. Positive means along the chosen normal; negative means opposite it.
n and AEθPlane of the surfaceAngle is measured from the normal
Area normal and field angle— A is perpendicular to the surface. The dot product selects E’s component along that normal.

Flux is a signed scalar, not a force and not the electric field itself. The water-flow analogy helps with projected area, but electrostatic flux is not a stream of charge moving through the window. Nor is it literally equal to a number of drawn field lines, whose count we can choose. It measures the field’s signed normal component accumulated over area.

A tilted square

Problem
A square of side 0.10 m is in a uniform field 3.0 × 10³ N C⁻¹. Its chosen normal makes 60° with E. Find flux and compare a normal parallel to E.

  1. 1.Area is (0.10)² = 0.010 m². Flux = 3000 × 0.010 × cos60° = 15 N m² C⁻¹.
  2. 2.If the chosen normal is parallel to E, flux is 30 N m² C⁻¹. A normal antiparallel gives −30; a normal at 90° gives zero. Do not use side length in place of area.

A nonuniform field or a curved surface

General flux as a surface sumLaTeX
For a closed surface write a circle on the integral: ∮. No calculus beyond the idea of adding local contributions is required to use the symmetric cases.

The shortcut EA cosθ requires a constant normal component over the chosen planar area. For a sphere in a uniform rightward field, outward flux on the right and inward flux on the left cancel. Zero total flux does not mean E is zero on the surface. Conversely, a surface can have a large area yet zero flux if the field lies tangent everywhere. These distinctions are the foundation of Gauss’s law.

A spatially varying density

Problem
A straight segment 0 ≤ x ≤ L has λ(x) = bx, where b is constant. Find total Q.

  1. 1.A small segment dx contains dq = bx dx. Sum over the length: Q = ∫₀ᴸ bx dx = bL²/2.
  2. 2.Equivalently, the linear density rises from 0 to bL, so its average is bL/2; average times L gives the same result. b has unit C m⁻², so bL² is a charge.

Quick Quiz

Quiz

Quick check

Surface charge density has unit

Explanation: It is charge divided by area.

Quick check

In EA cosθ, θ is measured between E and

Explanation: The area vector is normal to the surface.

Quick check

Reverse an open surface’s chosen normal. Signed flux

Explanation: The area vector reverses, so its dot product reverses.

Quick check

A uniform field tangent to a plane gives flux

Explanation: Its component along the surface normal vanishes.

Quick check

Microscopic charge quantisation and smooth macroscopic density are

Explanation: The smooth density averages over many discrete charges.

Practice Problems

Practice Problems
  1. A wire of length 0.50 m has uniform λ = −4.0 nC m⁻¹. Find Q and explain its sign.
  2. A rectangle 0.20 m by 0.10 m has its plane at 30° to E = 500 N C⁻¹. Choose the normal making an acute angle with E and find flux.
  3. Explain how to calculate E from a nonuniform volume density without assuming the field is uniform.
  4. A cube is in a uniform field along +x. Explain all six face fluxes.
  5. For λ(x) = bx on 0 ≤ x ≤ 0.20 m, b = 5.0 nC m⁻², find Q and compare with endpoint density times length.

Q = λL = −4.0 × 0.50 = −2.0 nC. The negative sign denotes excess negative charge. It does not give the wire a negative length or a charge-vector direction.

Key Takeaways

Key Takeaways

• Continuous density averages over discrete microscopic charges. • Use λ for length, σ for area and ρ for volume. • Add every source element’s vector field using superposition. • The area vector points normal to a surface. • Flux is a signed scalar measuring normal field over area. • EA cosθ uses the angle to the normal and requires a uniform normal component. • Zero net flux need not mean zero field.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…