Skip to lesson content

Lesson 11 of 11

Electric Charges and Fields · Lesson 11 of 11

Chapter Summary and Practice

“Connect charge, Coulomb force, fields, dipoles, flux and symmetry into a single method for reasoning about electrostatics.”

Learning Objectives

• Select a suitable method for force, field, dipole and flux problems. • State the assumptions and domains of the chapter’s principal formulas. • Connect vector superposition with charge-density models and Gauss’s law. • Solve mixed problems while checking units, directions, limiting cases and source symmetry.

One connected framework

Begin with charge as a property of matter: signed charges add, isolated-system charge is conserved, and ordinary net charge changes in elementary steps. Fixed charges interact by Coulomb’s empirical law. Superposition adds those pairwise vector interactions. Dividing force by a small test charge defines an electric field, so the source arrangement can be described independently of a chosen test particle. Multiplying that field by a test charge then returns the force, and Newton’s law predicts acceleration.

Different source geometries organise those same principles in different ways. A dipole has zero total charge but a nonzero first-order separation of charge, described by p. Its distant field survives partial cancellation and falls faster than a single-source field. A distribution containing very many charges is more conveniently described by λ, σ or ρ. Flux adds the normal component of E over a surface, and Gauss’s law connects that closed-surface sum to net enclosed charge. None of these steps replaces vector direction with a scalar charge total.

Formula reference with conditions

RelationshipMeaning and symbolsUnitsConditions and limits
Q = ne; Q_total = ΣqᵢElementary charge steps and signed additionQ in C; e in COrdinary isolated-body charge; n integer
F = k|q₁q₂|/r²Pairwise force magnitudeF in N; r in mStationary point charges in vacuum; r > 0
E = F/qₜ; F = qₜESource field and test forceE in N C⁻¹Undisturbed source arrangement; signed qₜ
E = ΣEᵢ; dq = λdl, σdA or ρdVVector superposition with discrete or continuous sourcesλ: C/m; σ: C/m²; ρ: C/m³Use each source-to-point separation and direction
p = qd; τ = p × EDipole moment and external-field torquep: C m; τ: N md is full separation from − to +; uniform E for simple couple law
E_ax ≈ 2kp/r³; E_eq ≈ kp/r³Far dipole field magnitudesN C⁻¹r ≫ half-separation; axial along p, equatorial opposite p
Φ = EA cosθ; ∮E·dA = Q_enc/ε₀Flux and Gauss’s lawΦ: N m² C⁻¹Flat uniform-field shortcut; closed surface for Gauss; θ to normal
Eᵣ = λ/(2πε₀r)Infinite uniform line fieldN C⁻¹Radial direction, r > 0; finite-wire end effects excluded
E = |σ|/(2ε₀)Symmetric infinite-sheet field magnitudeN C⁻¹Away from positive sheet, toward negative; edge effects excluded
Eᵣ = kQ/r² outside; E = 0 insideUniform thin spherical shellN C⁻¹Outside r > R; inside r < R; surface needs one-sided limits

Reconstruct the derivations instead of memorising them

For an exterior axial dipole point, write the two signed fields at distances r − a and r + a. Their numerator difference is 4ra, giving 2kpr/(r² − a²)². For an equatorial point, use equal distances √(r² + a²), cancel transverse components and add axial ones to get −kp/(r² + a²)³ᐟ². Neglecting a²/r² only at large r produces the far formulas. In a uniform external field, the two end forces cancel but their couple arm is d sinθ, so τ = pE sinθ.

For Gauss applications, match the source symmetry to its area growth. A line uses a cylindrical wall of area 2πrL and enclosed λL, giving E ∝ 1/r. A sheet uses two pillbox faces of total area 2A and enclosed σA, giving distance-independent E. A shell uses spherical area 4πr² with all Q outside or none inside. The field-free shell interior follows only because spherical symmetry lets zero integrated flux determine zero local field. A filled sphere encloses charge proportional to r³ and therefore has a different interior result.

Choose a method and test its result

QuestionStart withEssential check
Force on one charge among a few sourcesDraw individual Coulomb forces, resolve and addDo all arrows act on the same selected body?
Field at a pointAdd source fields before choosing test chargeHave you excluded point self-fields?
Dipole fieldUse exact geometry or justified far approximationIs r large compared with separation?
Dipole force or torqueAdd end forces and their momentsIs external E uniform over the pair?
Closed-surface fluxGauss’s law with signed enclosed chargeIs the boundary closed and free of ideal point charges?
Local field of a continuous distributionSuperposition or symmetry plus GaussCan the required E component actually be taken outside the integral?
A neutral pair can give zero flux and nonzero force

Problem
A Gaussian sphere encloses both charges of a dipole. A separate small negative test charge lies outside it. Does zero flux imply zero force on that test charge?

  1. 1.The enclosed charges sum to zero, so total outward flux is zero. Gauss’s law fixes an integrated quantity, not the field at each exterior point.
  2. 2.The dipole generally has a nonzero external field. The negative test charge feels force opposite that field. Use the dipole field at its actual location to find the force; zero net flux is insufficient.
A method-selection comparison

Problem
Compare fields at 0.10 m and 0.20 m for a point charge, a far dipole, an infinite line and an infinite sheet, with each source fixed.

  1. 1.At doubled distance, a point-charge field becomes one quarter; a far dipole field at the same orientation becomes one eighth.
  2. 2.An infinite-line field becomes one half; an infinite-sheet field stays unchanged. These ratios encode the sources’ different geometries and cancellation patterns.
  3. 3.The comparisons require their model domains. For example, a finite sheet seen from very far away cannot continue to have distance-independent field.

Common mistakes and their repairs

Zero net charge is not zero field; test the vectors. Negative charge does not mean negative force magnitude; state direction separately. Zero flux is not zero field; inspect the signed surface contributions. “Field is along a surface” means no normal component, not maximum flux. Equal opposite forces do not rule out torque. A nice Gaussian shape does not create source symmetry. The far-field dipole result and infinite-source expressions are approximations for finite real systems, so check their length scales before substituting.

Before accepting a number, check its dimensions, sign, rough size and behaviour in a simple limit. A shell interior should give zero for the shell’s own field; increasing distance outside should reduce it. A negative test charge should reverse force relative to E. If a source or test charge is set to zero, the corresponding interaction must disappear. These checks cannot prove every answer, but they catch many otherwise plausible errors.

Quick Quiz

Quiz

Quick check

A Gaussian surface encloses a dipole. Its net flux is

Explanation: The algebraic enclosed charge is zero.

Quick check

Which step is always justified in a few-charge field problem?

Explanation: Superposition combines vectors using the actual geometry.

Quick check

A permanent dipole at 90° in uniform E has

Explanation: Uniform end forces cancel while pE sinθ is maximum.

Quick check

Which ideal source gives a field independent of distance?

Explanation: Planar symmetry with the pillbox gives |σ|/(2ε₀).

Quick check

After a formula calculation, which is a valid check?

Explanation: Independent physical and mathematical checks can reveal errors.

Practice Problems

Practice Problems
  1. Two initially neutral bodies exchange 5.0 × 10¹² electrons from A to B. Find their final charges and total.
  2. Charges +2 μC and −8 μC lie 0.30 m apart. Find force magnitude and direction on each.
  3. A +1 nC charge is at the origin, with +2 nC at x = 0.10 m and +2 nC at y = 0.10 m. Find its net force.
  4. A −2 nC test charge feels +6 μN along x. Find E and predict force on +3 nC at the same point.
  5. A dipole has p = 2.0 × 10⁻¹⁰ C m and full separation 2.0 mm. Find q, then approximate equatorial E at 0.10 m.
  6. A dipole with p = 2.0 × 10⁻¹⁰ C m is tilted 45° in a uniform 10⁴ N C⁻¹ field. Find torque magnitude and net force.
  7. A 0.20 m by 0.30 m surface has normal at 120° to a uniform E = 400 N C⁻¹. Find signed flux and flux for the opposite normal.
  8. A closed box encloses +3 nC, −1 nC and −4 nC. A large positive charge is outside. Find net flux and explain the external field contribution.
  9. An infinite line has λ = 2.0 nC m⁻¹. Find E at 0.050 m and infer E at 0.10 m.
  10. A uniform thin shell of radius 0.20 m carries −8.0 nC. Find E at r = 0.10 m, r = 0.40 m and just outside the surface. Compare a uniform solid sphere with the same Q and R at r = 0.10 m.
  11. Two ideal parallel sheets carry +5.0 nC m⁻² and −5.0 nC m⁻². Find the field between and outside, and explain why the model cannot be used arbitrarily far from finite plates.
  12. Sketch the shell field graph for Q > 0 and explain why zero flux cannot by itself justify the interior branch.

Each transferred electron has −e. A loses negative charge, so Q_A = +Ne = +8.0 × 10⁻⁷ C. B gains it, so Q_B = −8.0 × 10⁻⁷ C. Their combined total remains zero. The result assumes no other charge exchange.

Key Takeaways

Key Takeaways

• Charge conservation, Coulomb’s law and superposition form the chapter’s foundation. • Electric field separates the source environment from the chosen test charge. • Neutral charge distributions can have nonzero fields and dipole moments. • Torque, force, field and flux are different physical quantities. • Gauss’s law always uses a closed surface and net enclosed charge. • Simple field extraction requires justified source symmetry. • Every approximation needs a stated length-scale or physical condition. • Units, directions and limiting cases are essential checks.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…