Skip to lesson content

Lesson 2 of 11

Electric Charges and Fields · Lesson 2 of 11

Coulomb’s Law

“Use the empirical inverse-square force law with consistent directions, units and model assumptions.”

Learning Objectives

• State Coulomb’s law and its point-charge and electrostatic assumptions. • Calculate signed force vectors and distinguish magnitude from direction. • Explain charge sharing and force scaling in a torsion-balance investigation. • Compare electrical and gravitational interactions quantitatively.

Measuring the interaction

The observation that like charges repel does not tell us how much force acts. Coulomb used a torsion balance: an electrical force twists a fine suspension, whose restoring torque provides a measure of force. With the charges held fixed, changing their separation reveals an inverse-square dependence. With distance fixed, changing one charge changes the force proportionally. Charge ratios can be prepared by touching a charged sphere to a distant identical neutral sphere and then separating them: symmetry and conservation give half the total on each, provided external influences are negligible. Repeating produces successive halvings.

These are experimental inputs. The inverse-square law is not proved by the fact that charges repel. A useful investigation changes one variable at a time, controls leakage and compares measured force ratios with predictions. Finite sphere size, charge redistribution at close separation, humidity and angle changes introduce uncertainty. Treat the bodies as point charges only when their sizes are small compared with their separation, or when an independently justified symmetry result permits it.

Magnitude of the electrostatic force in vacuumLaTeX
F is nonnegative; q₁ and q₂ are signed charges in C and r is their separation in m. ε₀ ≈ 8.854 × 10⁻¹² C² N⁻¹ m⁻². For ordinary air, the vacuum expression is usually a good approximation.

A vector formula that handles both signs

Choose charge positions r₁ and r₂ in one coordinate system. The displacement r₂ − r₁ points from source charge 1 toward charge 2. Dividing by its length produces a unit vector: it specifies direction, not distance. Multiplying this vector by a positive product q₁q₂ pushes charge 2 away from charge 1; a negative product reverses the direction and pulls it toward charge 1.

Force on charge 2 due to charge 1LaTeX
Use signed charges here; do not insert absolute values and then expect the formula to choose attraction. The point-charge self-force is excluded.

Interchanging the two charges reverses the displacement and leaves their product unchanged. Thus F₁←₂ = −F₂←₁. The forces form a Newton’s-third-law pair on different bodies. They do not cancel in the equation of motion of either body. Equal forces do not mean equal accelerations because acceleration also depends on mass. At coincident ideal point charges the expression is singular, so r = 0 is outside its domain.

+−q₁ > 0q₂ < 0Force on 1Force on 2r
Attraction acts along the line joining charges— The force arrows act on different charges. Magnitudes are equal; directions are opposite.
Convert units before calculating

Problem
A +2.0 μC charge is at x = 0 and a −3.0 μC charge at x = 0.30 m. Find the force on the negative charge.

  1. 1.Convert to 2.0 × 10⁻⁶ C and −3.0 × 10⁻⁶ C. The separation unit vector points along +x.
  2. 2.F₂←₁,x = 9.0 × 10⁹ × (−6.0 × 10⁻¹²)/(0.30)² = −0.60 N.
  3. 3.The magnitude is 0.60 N; the direction is −x, toward the positive charge. The force on charge 1 is +0.60 N.

Read the relationships and check the dimensions

For fixed charges, doubling r reduces F to F/4. Doubling both charges at fixed r multiplies F by four. Doing both changes leaves F unchanged. A plot of force magnitude against distance curves downward toward zero; a plot against 1/r² is a straight line through the origin if the model holds. The units of kq₁q₂/r² are (N m² C⁻²)C²/m² = N. This confirms dimensional consistency, but cannot establish that the empirical exponent must be two.

Charge sharing and separation

Problem
Each of two charged spheres touches a separate identical neutral sphere. The extra spheres are removed, and the original separation is halved. Compare forces.

  1. 1.Each original charge becomes half its old value. Their product becomes one quarter.
  2. 2.The square of separation also becomes one quarter. Therefore Fnew/Fold = (1/4)/(1/4) = 1.
  3. 3.This assumes isolated identical-sphere sharing and point-charge separations. Close nearby conductors can upset simple equal sharing.

Why gravity can dominate bulk matter

Electric-to-gravitational force ratio for electron and protonLaTeX
Both are magnitudes. The r⁻² factors cancel; use G ≈ 6.67 × 10⁻¹¹ N m² kg⁻², mₑ ≈ 9.11 × 10⁻³¹ kg and mₚ ≈ 1.67 × 10⁻²⁷ kg.

The numerator and denominator both have units N m², so their ratio is dimensionless. For two protons the analogous ratio is about 1.2 × 10³⁶. Electric forces can attract or repel and largely cancel between neutral bulk objects. Ordinary gravitational forces between positive masses add attractively, so gravity can dominate at large scales. Neither this cancellation nor Coulomb repulsion explains the stability of a nucleus: the short-range nuclear interaction is essential. Atomic structure also requires quantum physics; a classical point-charge picture alone is incomplete.

Equal force, different acceleration

Problem
Estimate the electron–proton force and accelerations at separation 1.0 × 10⁻¹⁰ m.

  1. 1.The instantaneous force magnitude is 9.0 × 10⁹ × (1.60 × 10⁻¹⁹)²/(10⁻¹⁰)² = 2.30 × 10⁻⁸ N.
  2. 2.Electron acceleration magnitude is F/mₑ ≈ 2.53 × 10²² m s⁻²; proton acceleration magnitude is F/mₚ ≈ 1.38 × 10¹⁹ m s⁻².
  3. 3.The attractive forces have equal magnitudes while the accelerations differ. These are classical instantaneous estimates, not a valid classical model of an entire atom.

Quick Quiz

Quiz

Quick check

Distance is tripled with charges fixed. The force magnitude becomes

Explanation: The square of the separation grows by nine.

Quick check

In the signed vector law, a negative q₁q₂ means

Explanation: It reverses the source-to-test unit direction.

Quick check

Which forces constitute the third-law pair?

Explanation: The pair acts on different interacting bodies.

Quick check

The point-charge approximation is safest when

Explanation: Finite-size and redistribution effects are then less significant.

Quick check

Electric force divided by gravitational force for a given charge pair is independent of r because

Explanation: The common separation dependence cancels in the ratio.

Practice Problems

Practice Problems
  1. Find the force between +2 × 10⁻⁷ C and +3 × 10⁻⁷ C at 0.30 m in air.
  2. Charges +0.40 μC and −0.80 μC attract with force 0.20 N. Find their separation and the reverse force.
  3. Each charge doubles and separation halves. Find the force multiplier and explain each factor.
  4. Design a force-versus-distance test that distinguishes 1/r from 1/r².
  5. Show the electric-to-gravity ratio for two protons is dimensionless and estimate it.

Use F = k|q₁q₂|/r² with k ≈ 9 × 10⁹. The product is 6 × 10⁻¹⁴ C², so F = 9 × 10⁹ × 6 × 10⁻¹⁴/0.09 = 6.0 × 10⁻³ N. Both charges are positive, so each force is away from the other along their joining line.

Key Takeaways

Key Takeaways

• Coulomb’s law is an empirical law for electrostatic point-charge interactions. • The magnitude uses |q₁q₂|; the vector formula uses signed charges. • The force acts along the line joining the charges. • Third-law forces act on different bodies. • For fixed charges F varies as 1/r². • Equal forces can produce unequal accelerations. • Bulk electrical cancellation helps explain why gravity can dominate large neutral systems.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…