Alternating Current · Lesson 5 of 9
Series LCR Circuits
“Build impedance and phase from a single series current and phase-aware voltage addition.”
• Derive series impedance using Kirchhoff’s rule and phasors. • Calculate phase and identify inductive or capacitive behaviour. • Solve RL, RC and LCR circuits with consistent RMS values. • Explain why component voltage magnitudes can exceed their source magnitude.
One current, three distinct voltage responses
Connect R, L and C in one series path to a sinusoidal source. In the lumped-circuit approximation, charge conservation gives the same instantaneous current through all three elements. The elements do not have separately adjustable currents. What differs is the relation between that common current and each element’s voltage. R responds to current, L to its rate of change, and C to the accumulated charge.
We seek the sinusoidal steady state at the source frequency. Transient motion arising from initial charge and current is not represented by a fixed phasor triangle. With positive series resistance, that transient decays. Its duration depends on the component values, so “steady state” is an assumption about time after switching, not a claim that switching has no effects.
Deriving the voltage triangle
Choose current as the horizontal reference. The resistor voltage has length ImR and is horizontal. The inductor voltage has length ImXL and points upward, 90° ahead of current. The capacitor voltage has length ImXC and points downward, 90° behind current. The two reactive voltages oppose, giving a signed vertical component Im(XL − XC). The source phasor is the resultant of this component and the resistive voltage.
If XL > XC, the resultant source voltage lies ahead of current and current lags. If XL < XC, current leads. If they are equal, φ = 0 and Z = R. Squaring the difference hides its sign, so impedance alone cannot identify which leads. Calculate the signed reactance as a separate step. Units also check: the two squared terms both have Ω², leaving Z in Ω.
Instantaneous addition versus amplitude addition
At every instant vR + vL + vC equals the source voltage. Their peaks usually occur at different times, so their RMS or peak magnitudes cannot simply be added as scalar numbers. A large inductor voltage can cancel a large capacitor voltage. This does not violate the loop rule. Use VR = IR, VL = IXL and VC = IXC for magnitudes, then combine the phasors.
Problem
R = 200 Ω and C = 15.0 μF are in series across 220 V RMS at 50 Hz. Find current, component voltages and phase.
- 1.XC = 212.2 Ω. With no inductor, Z = √(200² + 212.2²) = 291.6 Ω. I = 220/291.6 = 0.754 A.
- 2.VR = 151 V and VC = 160 V. Their magnitude sum is about 311 V, but √(VR² + VC²) = 220 V.
- 3.φ = arctan(−212.2/200) = −46.7°. The leading current and perpendicular voltages resolve the apparent paradox.
Problem
At one frequency, R = 3 Ω, XL = 8 Ω and XC = 4 Ω. The source peak is 283 V. Find current, phase and component RMS voltages.
- 1.Net reactance is +4 Ω, so Z = √(3² + 4²) = 5 Ω. The source RMS voltage is 283/√2 = 200.1 V, giving I = 40.0 A.
- 2.φ = arctan(4/3) = +53.1°; current lags. VR ≈ 120.1 V, VL ≈ 320.2 V and VC ≈ 160.1 V.
- 3.The source is √(120.1² + (320.2 − 160.1)²) ≈ 200.1 V. The inductor voltage exceeds the source magnitude, but the reactive contributions partly cancel.
Useful limits and a reproducible method
With no capacitor the series RL impedance is √(R² + XL²), and current lags. With no inductor the series RC impedance is √(R² + XC²), and current leads. Omitting a component means using the appropriate circuit model; setting an absent capacitor to C = 0 in the LCR formula would describe an open gap, not a wire. Likewise, the R = 0 and XL = XC ideal limit has no bounded driven steady-state current and cannot be treated as a practical zero-impedance appliance.
For a calculation, first label whether the source is peak or RMS, convert component units, calculate ω and both reactances, retain the sign of XL − XC, then calculate Z and current. Find phase and voltage drops last. Check the loop through squared magnitudes and ask whether a lag or lead matches the dominant reactance. This prevents numerical answers that are plausible in size but wrong in timing.
Quick Quiz
Quiz
The same instantaneous quantity in a series LCR circuit is
Explanation: There is one series path, so charge conservation fixes a common current.
For XL = 30 Ω and XC = 50 Ω, current
Explanation: Net reactance is negative, so φ is negative in our convention.
R = 6 Ω and XL − XC = 8 Ω give Z equal to
Explanation: Z = √(6² + 8²) = 10 Ω.
Component RMS voltages fail to add arithmetically because
Explanation: Their peaks are not generally simultaneous.
Phasor analysis here calculates
Explanation: A fixed phasor has the source frequency and excludes arbitrary initial-condition transients.
Practice Problems
- At one frequency R = 12 Ω, XL = 25 Ω and XC = 9 Ω. A 100 V RMS source drives the circuit. Find Z, I, φ and all component voltages.
- An RC circuit has R = 30 Ω, XC = 40 Ω and V = 200 V RMS. Find current and phase.
- At a given frequency, a coil has resistance 8 Ω and inductive reactance 6 Ω. Find RMS current at 100 V and explain why 100/6 is wrong.
- A series LCR circuit has equal 300 V RMS inductive and capacitive drops and a 50 V RMS resistive drop. Find source voltage.
- Frequency doubles in a fixed LCR circuit. Can current always be said to decrease?
Net reactance = 16 Ω. Z = √(144 + 256) = 20 Ω, I = 5 A and φ = arctan(16/12) = +53.1°, a lag. VR = 60 V, VL = 125 V and VC = 45 V. Check √(60² + (125 − 45)²) = 100 V.
Key Takeaways
• A series circuit has a common instantaneous current. • Inductive and capacitive voltages oppose in the phasor plane. • Z = √[R² + (XL − XC)²] has units of ohms. • RMS current is V/Z; peak current is Vm/Z. • Positive XL − XC gives current lag and negative gives lead. • Component voltage magnitudes need phase-aware addition. • A steady-state phasor solution does not determine switching transients.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…