Skip to lesson content

Lesson 4 of 9

Alternating Current · Lesson 4 of 9

Capacitors in AC Circuits

“Explain how charging and discharging produce a leading sinusoidal current without conduction across an ideal dielectric.”

Learning Objectives

• Derive capacitor current from q = Cv. • Explain why current leads voltage by 90°. • Calculate reactance and frequency dependence. • Track stored electric energy and distinguish AC behaviour from settled DC.

A gap can interrupt conduction but allow circuit current

When connected to a DC source through resistance, a capacitor initially charges. Opposite charges build on its plates and its voltage approaches the source voltage. In the settled ideal DC state, charge stops changing and current becomes zero. Under AC drive, voltage keeps changing, so the plates repeatedly charge, discharge and acquire the opposite polarity. The external wires carry current even though no conduction electrons pass through an ideal insulating gap.

Charge conservation is maintained: charge entering one plate is accompanied by charge leaving the other through the rest of the circuit. The changing electric field between plates is associated with displacement current, a topic developed further with electromagnetic fields. Saying that a capacitor “passes AC” is a circuit shorthand, not a statement that electrons freely cross its dielectric. Real dielectrics can leak or break down; those effects are excluded here.

Charge gives the current lawLaTeX
q is the signed charge on the reference plate in C; v is its voltage relative to the other plate in V. Positive i enters that reference plate. C is constant capacitance in F, with F = C V⁻¹.

The derivative is largest when voltage crosses zero most steeply and zero at voltage peaks. At a positive voltage maximum the plate charge is momentarily largest, but it is no longer increasing; current is zero. At a rising voltage zero the charge is zero and increasing fastest; current is at its positive maximum. This distinguishes amount of charge from rate of charge transfer.

Sinusoidal capacitive responseLaTeX
Current leads voltage by 90°. The positive reactance magnitude XC is in Ω. In the chapter convention i = Im sin(ωt − φ), the capacitor has φ = −π/2. RMS values satisfy I = V/XC.
Capacitor: current leads voltage+1−1t/T0.00.250.50.751.0blue: v/Vm; red: i/Im
Capacitor: current leads voltage— Normalized amplitudes; the curves do not equate volts with amperes. One full cycle is shown.

Why faster variation produces more current

For fixed voltage amplitude, doubling frequency makes each charge reversal occur in half the time, doubling the maximum rate of charge transfer. Therefore XC halves and current doubles. Increasing C means more plate charge is required for the same voltage; at a fixed frequency the current increases in direct proportion to C. Dimensions confirm the result: 1/(s⁻¹ F) = V/A = Ω.

At low but nonzero frequency XC becomes large and the sinusoidal current becomes small. At exactly steady DC use dq/dt = 0 after charging rather than divide by a zero frequency. At very high frequency the ideal formula predicts small XC, but lead inductance, dielectric losses and finite source impedance limit its applicability. An ideal capacitor does not guarantee unlimited physical current.

Electric-field energy returns each cycle

Multiply i = C dv/dt by v to obtain p = Cv dv/dt = d(½Cv²)/dt. As |v| increases, the electric field stores energy; as |v| decreases, it releases energy. During a positive voltage half-cycle the current changes sign at the voltage maximum, which changes power from absorption to return.

Electric energy and instantaneous powerLaTeX
UC is in J and passive pC in W. The ideal capacitor returns the same energy it receives over a full cycle. Real dielectric and conductor losses can give positive mean absorption.
Capacitive instantaneous power+1−1t/T0.00.250.50.751.0p/(Vm Im): positive means energy enters the element
Capacitive instantaneous power— Normalized amplitudes; the curves do not equate volts with amperes. One full cycle is shown.
A capacitor at two frequencies

Problem
An ideal 15.0 μF capacitor uses 220 V RMS at 50 Hz. Find XC, RMS current and peak current, then double f.

  1. 1.Convert C = 15.0 × 10⁻⁶ F. XC = 1/[2π(50)(15.0 × 10⁻⁶)] = 212.2 Ω.
  2. 2.I = 220/212.2 = 1.037 A and Im = √2I = 1.466 A.
  3. 3.At 100 Hz, XC = 106.1 Ω and I = 2.073 A at the same RMS voltage. The phase remains a 90° lead in the ideal model.
A lamp in series with capacitance

Problem
Predict the settled behaviour of a resistive lamp in series with a capacitor for DC and for sinusoidal AC. What if capacitance is reduced?

  1. 1.For DC the capacitor charges and the current settles to zero; the lamp is then dark. A brief switching transient may occur, so “no glow” describes the settled state, not every instant.
  2. 2.For AC, repeated charge changes allow current. In the ideal series RC model its RMS value is V/√(R² + XC²).
  3. 3.Reducing C increases XC and lowers current and lamp heating. In settled DC, current remains zero for either capacitance; the duration and energy of the transient can change.

Quick Quiz

Quiz

Quick check

Capacitor current is greatest when sinusoidal voltage

Explanation: i = C dv/dt depends on slope, not voltage magnitude.

Quick check

At fixed V and f, doubling C makes ideal RMS current

Explanation: I = ωCV.

Quick check

In an ideal capacitor, conduction electrons

Explanation: External conduction accompanies changing plate charge without conduction across the insulating gap.

Quick check

A pure capacitor has φ in i = Im sin(ωt − φ) equal to

Explanation: The current leads, so the defined lag angle is negative.

Quick check

Mean power in the ideal capacitor over a cycle is

Explanation: Stored field energy returns to its original value.

Practice Problems

Practice Problems
  1. A 60 μF capacitor uses 110 V RMS at 60 Hz. Find reactance, RMS current and mean power.
  2. For C = 10 μF and v = 100 sin(500t) V, find q(t) and i(t).
  3. A 20 μF capacitor reaches 200 V. Find maximum energy. What if its voltage polarity reverses at the same magnitude?
  4. At fixed RMS voltage, frequency is doubled while C is halved. Predict XC and current.
  5. At a capacitor voltage maximum, is the plate empty because current is zero? Explain.

XC = 1/[2π(60)(60 × 10⁻⁶)] = 44.21 Ω. I = 110/44.21 = 2.49 A. The ideal mean power is zero; nonzero RMS current indicates repeated energy exchange, not dissipation.

Key Takeaways

Key Takeaways

• An ideal capacitor carries external AC current through repeated charging and discharging. • Conduction charge does not cross the ideal dielectric. • Current is C dv/dt and leads sinusoidal voltage by 90°. • XC = 1/(ωC) decreases when frequency or capacitance increases. • Settled ideal DC current is zero after charging. • Electric energy is ½Cv². • Ideal capacitive energy exchange gives zero mean dissipation.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…