Skip to lesson content

Lesson 4 of 8

Wave Optics · Lesson 4 of 8

Young’s Double-Slit Experiment

“Explain how a common source creates coherent slits and connect path difference to bright and dark screen positions.”

Learning Objectives

• Explain why two slits illuminated by one suitable source give stable fringes. • Relate exact path difference to its small-angle approximation. • Calculate bright and dark orders and fringe spacing. • Distinguish interference spacing from the envelope caused by finite slit width.

How Young obtains two waves with a shared phase history

Two ordinary lamps shining through separate pinholes do not normally produce steady fringes because their emission phases fluctuate independently. Young’s arrangement divides light from one sufficiently small source. A source opening S illuminates two close, narrow openings S₁ and S₂, arranged symmetrically. Their emitted fields inherit the same source fluctuations and maintain a sufficiently stable relative phase. Light spreads from each opening and overlaps on a distant screen.

Young arrangement: one source, two coherent pathsSS₁S₂POscreen distance Ddyy is measured from O; d is slit separation, not slit width.
One source feeds both interfering slits— Screen separation is compressed and slit separation exaggerated. For the sign convention below, upper S₁ is at y = +d/2 and lower S₂ at y = −d/2.

Both waves must reach the same screen point and have compatible polarisations. The source cannot be arbitrarily wide: contributions from different source locations can shift the fringe pattern and wash out contrast. Narrow openings help create overlapping spread, while a monochromatic filter simplifies the visible pattern. Mechanical stability matters because a path change comparable to a fraction of a wavelength can change phase substantially.

Define the geometry before calculating

Let the slit plane be z = 0 and the screen be z = D. Slits lie at transverse coordinates +d/2 and −d/2. The screen point P has coordinate y, measured from O on the perpendicular bisector. Take Δ = S₂P − S₁P. For positive y, P is nearer the upper slit S₁, so Δ is positive. Keeping this convention makes order signs and possible shifts intelligible.

Exact paths for the chosen coordinatesLaTeX
All lengths are in the same medium. The symmetrical central point y = 0 has exactly equal paths.

A useful algebraic check avoids directly subtracting nearly equal square roots. Multiply the difference by (r₂ + r₁)/(r₂ + r₁). The numerator becomes r₂² − r₁² = (y + d/2)² − (y − d/2)² = 2yd. Thus Δ = 2yd/(r₂ + r₁). If D is much greater than d and |y|, each path is approximately D and Δ ≈ yd/D. This geometry is explanatory support for the standard fringe expression.

Small-angle path differenceLaTeX
Near the axis, sinθ ≈ tanθ ≈ y/D. Exact equal spacing on a flat screen is an approximation; larger-angle positions require the actual geometry.

Bright order and dark order are different families

For initially in-phase slits, bright positions satisfy Δ = mλ, with signed integer m including zero. The central bright fringe is m = 0. The first bright fringe on the positive side is m = 1, the fourth is m = 4; do not count the central bright fringe as “first order.” Dark positions satisfy Δ = (m + 1/2)λ with m any integer, giving the nearest positive and negative dark fringes at half a fringe spacing.

Positions and spacing in the paraxial modelLaTeX
β is the spacing between adjacent bright fringes or between adjacent dark fringes, in m. It is not the distance from a bright fringe to the neighbouring dark fringe, which is β/2.
Ideal narrow-slit interference profileI0β2βyEqual bright-to-bright spacing; dark fringes lie halfway.
A repeating bright/dark pattern— Equal coherent contributions and negligibly narrow slits. The profile omits the finite-slit diffraction envelope.

Subtract neighbouring bright positions: y_(m+1) − y_m = λD/d. The same subtraction works for the dark family. Both are equally spaced in the small-angle approximation, but a bright and its adjacent dark are only half as far apart. Dimensional analysis gives (m × m)/m = m, which checks spacing units without proving the underlying physics.

Find wavelength from a fourth bright fringe

Problem
Slits are 0.28 mm apart, screen distance is 1.4 m and the fourth positive bright fringe is 1.2 cm from O. Find wavelength.

  1. 1.Use y₄ = 4λD/d. Convert d = 2.8 × 10⁻⁴ m and y₄ = 1.2 × 10⁻² m.
  2. 2.λ = y₄d/(4D) = (1.2 × 10⁻²)(2.8 × 10⁻⁴)/(5.6) = 6.0 × 10⁻⁷ m = 600 nm.
  3. 3.The central fringe is order zero. Calling it the first order would give an incorrect denominator.
Place the first few fringes

Problem
For λ = 500 nm, D = 2.0 m and d = 0.50 mm, find β, first bright and first dark on the positive side.

  1. 1.β = (500 × 10⁻⁹)(2.0)/(0.50 × 10⁻³) = 2.0 × 10⁻³ m = 2.0 mm.
  2. 2.The first positive bright is at +2.0 mm; the first positive dark is at +1.0 mm. The corresponding negative positions are −2.0 mm and −1.0 mm.
  3. 3.A pattern with 2 mm bright-to-bright spacing does not have 2 mm bright-to-dark spacing.

The ideal intensity profile and practical visibility

Equal-beam Young intensity near the axisLaTeX
I₀ is the intensity of either narrow-slit contribution at the same location, treated approximately constant across the small region considered. Source coherence and matching polarisation are assumed.

The central maximum is bright because the two paths are equal and the slits are in phase. If illumination introduces a source phase offset, the pattern shifts and the equal-path point need not remain brightest. Unequal slit amplitudes preserve the phase locations of extrema but reduce contrast. Closing one slit removes the two-slit cross term, yet the remaining slit can still produce a diffraction pattern; “all fringes vanish into perfectly uniform light” would overlook its finite width.

In a real double slit, each slit has width a and the slit centres have separation d. The broad single-slit diffraction pattern controls the strength of the finer two-slit fringes. Changing d primarily changes interference spacing, whereas changing a changes the broad envelope. This distinction becomes central in the diffraction lesson. An ideal constant-height fringe graph is useful locally but is not the complete intensity distribution of every physical double slit.

Quick Quiz

Quiz

Quick check

Why use one small source to illuminate both slits?

Explanation: Both contributions inherit the same source fluctuations with stable relative paths.

Quick check

The fourth bright order is located at

Explanation: The central fringe is order zero; bright order m lies at mβ.

Quick check

Adjacent bright and dark fringes are separated by

Explanation: The two families are offset by a half-integer order.

Quick check

If d doubles at fixed λ and D, β becomes

Explanation: Fringe spacing varies inversely with slit separation.

Quick check

Which distinction is correct?

Explanation: Different geometric scales control fine interference and the broad diffraction envelope.

Practice Problems

Practice Problems
  1. Derive the small-angle Δ ≈ yd/D relation by subtracting squared path lengths.
  2. Use λ = 600 nm, d = 0.30 mm and D = 1.5 m to locate the third bright and second positive dark fringe.
  3. A pattern has β = 1.2 mm at screen distance 1.0 m with λ = 480 nm. Find d.
  4. A learner sees no stable fringes using two independent same-colour lamps. Would merely narrowing the observation screen restore coherence?
  5. Explain what survives if one slit is closed and why.

For slits at ±d/2, r₂² − r₁² = (y + d/2)² − (y − d/2)² = 2yd. Since r₂ − r₁ = (r₂² − r₁²)/(r₂ + r₁), Δ = 2yd/(r₂ + r₁). With D much larger than d and |y|, r₂ + r₁ ≈ 2D, so Δ ≈ yd/D. The approximation must be revisited far from the axis.

Key Takeaways

Key Takeaways

• Young’s arrangement divides one suitable source to create coherent contributions. • Slit separation d and individual width a are different quantities. • Near the axis the signed path difference is approximately yd/D. • Bright orders satisfy y = mλD/d; the central bright is order zero. • Dark orders lie halfway between adjacent bright positions. • Fringe spacing β = λD/d is a paraxial result. • Finite slit width produces a diffraction envelope around the fine interference pattern.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…