Skip to lesson content

Lesson 3 of 8

Wave Optics · Lesson 3 of 8

Coherent Superposition and Interference

“Add light-wave amplitudes, derive interference intensity and explain coherence, visibility and energy redistribution.”

Learning Objectives

• Convert propagation path difference into relative phase. • Derive the equal-amplitude interference intensity relation. • Distinguish coherent from incoherent intensity addition. • Explain why unequal intensities or changing phase reduce dark-fringe contrast.

Two fields can cancel where both sources alone would illuminate

A ripple tank provides a useful starting model. Two oscillating needles driven with a stable phase relation create regions of enhanced and reduced motion. At an observation point the wave contributions add as displacements. Light similarly obeys field superposition: in a linear optical situation, total electric field is the vector sum of the contributions. The light sources need not disappear when the resulting field is small at one location.

For the scalar equations below, consider two light waves of the same frequency with electric fields along the same transverse direction. Then their signed components can be added algebraically. Waves with different polarisation directions require vector addition; perpendicular polarisations do not produce this same scalar interference term. The measured intensity averages very rapid optical oscillations rather than reporting the sign of the instantaneous field.

Separate source phase from phase acquired in travel

If two waves start in phase and travel through the same uniform medium, an extra path length λ is one extra cycle. An extra λ/2 is half a cycle. Define the signed propagation path difference Δ = ℓ₂ − ℓ₁. With the chosen time convention, a longer path delays the second contribution. Only the cosine of the relative phase will matter to the simple intensity relation, so reversing the sign convention does not alter its prediction.

Path and phase differencesLaTeX
φ_s is the source phase difference in a convention where E₂ carries +φ_s at equal path. For different media, use optical-path difference and vacuum wavelength instead of geometric Δ and one material wavelength.

A source phase offset must not be ignored. Equal path lengths give constructive interference only when the incident source contributions arrive in phase and have compatible polarisations. For two initially in-phase sources the sign of Δ only labels which contribution arrives later; whole wavelengths produce matching phase while half-integer wavelengths produce opposite phase.

Derive the equal-amplitude result

Add the signed field componentsLaTeX
The cosine-sum identity gives a resultant oscillation. Its nonnegative amplitude is |2a cos(φ/2)|; a negative prefactor is represented by an extra phase of π.

In the same medium, with otherwise identical beam conditions, intensity is proportional to the squared field amplitude. Let I₀ be the intensity from either contribution alone at the observation point. Squaring the resultant amplitude gives the observed relation. The factor of four at a bright point comes from doubling a field amplitude, not from creating four independent beams.

Equal-intensity interferenceLaTeX
I₀ is one-source intensity at that point; I is the combined time-averaged intensity. φ must be stable over the observation time for a stationary fringe pattern.
Equal-intensity coherent wavesI / I₀40π2πphase φmaximumzeroFor equal polarisations and stable relative phase.
Intensity varies with relative phase— Intensity is normalised to a single contribution. The phase axis is in radians, not path length.
Bright and dark conditions for initially in-phase sourcesLaTeX
Zero minimum additionally requires equal amplitudes and matching polarisation. Both positive and negative path differences are allowed.
A whole cycle is not a new relative phase

Problem
Two equal coherent contributions have propagation path difference 2λ and start in phase. Find combined intensity in terms of I₀.

  1. 1.Relative propagation phase is −4π. Since cos²(−2π) = 1, I = 4I₀.
  2. 2.With Δ = 2.5λ the relative phase would instead be −5π, giving cos²(−5π/2) = 0 and complete cancellation under the ideal equal-amplitude conditions.
Intensity between a bright and dark point

Problem
At a bright point with Δ = λ, intensity is K. Find intensity at Δ = λ/3 for the same ideal equal contributions.

  1. 1.The bright value is K = 4I₀. At Δ = λ/3, |φ| = 2π/3, so I = 4I₀ cos²(π/3) = I₀.
  2. 2.Thus the requested intensity is K/4. Taking intensity proportional to path difference would have no wave-physics justification.

What coherence does and does not require

Coherent contributions maintain a definite relative phase over the measurement interval. Equal frequency is needed for a fixed phase difference in this simple monochromatic model, but two independent same-colour lamps generally do not maintain that relation. Their emission phases fluctuate independently. A detector then averages rapidly changing constructive and destructive arrangements rather than recording a stable spatial pattern.

Incoherent average for equal contributionsLaTeX
For phase variations that sample the cycle without a preferred phase, the average cosine is zero. This is intensity addition after averaging, not failure of instantaneous field superposition.

For stable optical interference the common-source arrangement, path stability, finite source size and polarisation all matter. A detector that averages for too long relative to rapid phase drift can lose fringes. Conversely, some laboratory sources can be phase locked; “independent sources can never interfere” is too absolute. The ordinary two-lamp situation simply lacks the needed stable relative phase during observation.

Unequal intensities: destructive need not mean zero

General two-beam relation for matching polarisationsLaTeX
This follows by squaring E₁ + E₂ and averaging the cross term. It assumes a stable relative phase and compatible field directions; incoherent averaging removes the cosine term.

The cross term comes from the product of the two field components. Its coefficient is related to amplitude product, hence the square root of intensity product. If one contribution is much weaker, it cannot completely cancel the stronger at any phase. This is a useful extension of the equal-amplitude source model and explains reduced contrast without inventing imperfect phase coherence.

Unequal contributions

Problem
The individual intensities at a point are 9 and 4 W/m². Find the coherent extrema and incoherent sum.

  1. 1.Square roots are 3 and 2 in consistent amplitude-related units. Thus I_max = (3 + 2)² = 25 W/m² and I_min = (3 − 2)² = 1 W/m².
  2. 2.The incoherent average is 9 + 4 = 13 W/m². Perfectly stable phase can still give a nonzero dark minimum if amplitudes differ.

Where does the energy go at a dark fringe?

Interference redistributes energy spatially. In a complete steady experiment, enhanced regions balance reduced regions when energy flow over the appropriate full pattern is accounted for. A detector placed at one dark location samples little local power; it does not show that both sources have stopped supplying energy. The average of the ideal equal-beam pattern over a full phase period is 2I₀, equal to the sum of the individual uniform contributions. For real finite beams, evaluate conservation over the actual illuminated region and boundaries, not an arbitrary single patch.

Quick Quiz

Quiz

Quick check

Equal coherent in-phase waves each have intensity I₀. Combined intensity is

Explanation: Fields add to double amplitude, whose square gives four times one intensity.

Quick check

A path difference λ/2 for initially in-phase equal contributions gives relative phase magnitude

Explanation: Path phase is 2πΔ/λ.

Quick check

Two ordinary independent lamps do not show steady fringes mainly because

Explanation: Time averaging removes the fluctuating interference term.

Quick check

For I₁ = 9 and I₂ = 4 in the same units, the minimum coherent intensity is

Explanation: Use (√9 − √4)² = 1.

Quick check

At a dark interference fringe, energy is

Explanation: Spatial redistribution is consistent with energy conservation.

Practice Problems

Practice Problems
  1. Derive I = 4I₀ cos²(φ/2) for two equal coherent same-polarisation waves.
  2. For equal initially in-phase beams, compare intensities at Δ = 0, λ/4, λ/2 and 3λ/4.
  3. Two coherent contributions have intensities 16 and 1 W/m². Find maxima, minima and incoherent average.
  4. Two waves have the same wavelength but a source phase difference π. Are equal path lengths bright or dark?
  5. Explain why instantaneous superposition still holds for incoherent light.

Write E₁ = a cosωt and E₂ = a cos(ωt + φ). The cosine-sum identity gives E = 2a cos(φ/2) cos(ωt + φ/2). The resultant amplitude magnitude is |2a cos(φ/2)|. Since one-source intensity I₀ is proportional to a² in the same medium, their combined intensity is 4I₀ cos²(φ/2). The sign of the amplitude prefactor changes phase, not intensity sign.

Key Takeaways

Key Takeaways

• In linear optics electric fields add before intensity is calculated. • One wavelength of extra path corresponds to a phase change of 2π. • Initially in-phase equal beams give maxima at integer path wavelengths and minima at half-integers. • Stable relative phase defines coherence for the observation interval. • Equal frequency alone does not ensure stable optical fringes. • Unequal beam strengths generally leave a nonzero destructive minimum. • Incoherent averaging removes the interference cross term. • Interference redistributes energy rather than destroying it.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…