Skip to lesson content

Lesson 2 of 8

Wave Optics · Lesson 2 of 8

Reflection and Refraction of Wavefronts

“Derive optical interface laws from equal-time wavelet geometry and connect phase delay to prisms, lenses and mirrors.”

Learning Objectives

• Derive the laws of reflection and refraction using Huygens constructions. • Calculate boundary frequency, wavelength, speed and critical angle. • Explain wavefront changes caused by a prism, lens or curved mirror. • Distinguish optical delay from a change in photon energy.

An interface advances different parts of a front at different speeds

Let a plane front AB approach a plane boundary obliquely. Point A reaches the boundary first. During the time Δt before another point B reaches the boundary at C, A has already launched a secondary disturbance into the second medium. The arriving portion travels BC = v₁Δt while the transmitted wavelet grows to radius AE = v₂Δt. The new transmitted front is the tangent CE to this wavelet.

Huygens construction: refractionABCEAB: incident front; CE: later refracted front.BC = v₁Δt; AE = v₂Δt, with v₂ < v₁.
Refraction as an equal-time construction— Accurate triangle geometry for v₂/v₁ = 2/3. Angles of incidence and refraction are measured between propagation normals and the boundary normal.

The incident front AB is perpendicular to its ray BC, so triangle ABC is right-angled at B. The tangent front CE is perpendicular to the wavelet radius AE, so triangle AEC is right-angled at E. Both triangles share boundary length AC. The angle between AB and AC equals the incidence angle i, because it is the angle between the two corresponding normals. Likewise the angle between CE and AC equals the refraction angle r.

The refraction proofLaTeX
A, B, C and E label the diagram. The same elapsed time and boundary distance appear in both ratios, so they cancel.
Snell’s law in index formLaTeX
Refractive index is dimensionless. c is the vacuum speed. “Optically denser” means larger refractive index at the frequency of interest, not necessarily larger mass density.

If v₂ < v₁, then sin r < sin i and the transmitted ray bends toward the normal. If v₂ > v₁, it bends away. At normal incidence both angles are zero and there is no direction change, even though speed and wavelength can change. The incident ray, refracted ray and normal lie in the plane of this construction; this is the coplanarity part of the refraction laws.

Why frequency stays fixed but wavelength changes

At a stationary boundary in a linear medium, transmitted and reflected oscillations must keep pace with the incident driving oscillation. If one side advanced through a different number of cycles per second, the boundary fields would not match continuously. Thus ordinary reflection and refraction preserve frequency. Moving boundaries, nonlinear conversion and inelastic scattering are different situations and are not being described by this rule.

Boundary frequency and wavelength ratiosLaTeX
These wavelengths belong to their respective media. Vacuum wavelength λ₀ = c/f is a convenient common label for the light.
Reflected and transmitted yellow light

Problem
Light of wavelength 589 nm in air reaches water of index 1.33. Take air speed as 3.0 × 10⁸ m/s. Find the frequency, speed and wavelength on reflection and transmission.

  1. 1.Incident f = c/λ_air = 3.0 × 10⁸/(589 × 10⁻⁹) = 5.09 × 10¹⁴ Hz. Both outgoing waves have this frequency.
  2. 2.The reflected wave is in air, so its speed is approximately c and wavelength remains 589 nm. In water v = c/1.33 = 2.26 × 10⁸ m/s and λ = 589/1.33 = 443 nm.
  3. 3.The shorter wavelength in water does not mean the source has changed from yellow to a higher-frequency source. Colour classification normally refers to frequency or vacuum wavelength.

The index of glass can depend on frequency: this is dispersion. In the usual visible normal-dispersion range of glass, violet light has a larger index and a lower phase speed than red. A single value such as n = 1.5 applies at a specified wavelength or as an approximation, not as proof that every colour travels at exactly the same speed in glass.

The critical angle and total internal reflection

When n₁ > n₂, increasing i makes r grow until the transmitted direction reaches r = 90°. Substituting this limiting direction into Snell’s law gives the critical angle. Above it no real propagating refracted ray satisfies the law. Ideal lossless media then show total internal reflection. A field can still extend a short distance into the second medium as an evanescent field; “no transmitted ray” need not mean literally zero field there.

Critical-angle conditionLaTeX
Angles are measured to the normal. At i = i_c the limiting refracted direction grazes the surface; total internal reflection occurs for i > i_c.
Checking for a transmitted ray

Problem
Light travels from index 1.50 glass toward air. Find i_c and decide what happens at i = 50°.

  1. 1.i_c = arcsin(1/1.50) = 41.8°. Since 50° exceeds this, there is no propagating refracted ray in the ideal model.
  2. 2.Trying Snell’s law gives sin r = 1.50 sin 50° ≈ 1.15, which is not a real angle. This is a diagnostic of total internal reflection, not a reason to round sin r down to one.

Reflection follows from the same construction

Huygens construction: reflectionABCEAB: incident front; CE: later reflected front.BC = v₁Δt; AE = v₁Δt.
Reflection with equal wavelet and incident advances— The two right triangles share AC and have equal legs AE = BC, because the incident and reflected waves travel in the same medium.

For reflection the wavelet from A remains in medium 1, so AE = v₁Δt = BC. The right triangles AEC and ABC share hypotenuse AC and have an equal corresponding leg. They are congruent. Their angles to the reflecting surface are therefore equal, and the corresponding normal-ray angles obey i = r. Incidence, reflection and the normal are coplanar. This derivation establishes direction; it does not calculate reflection strength or its phase shift.

Optical path: a distance weighted by refractive index

Travel time through a segment of length ℓ in index n is nℓ/c. The optical path nℓ therefore measures propagation phase or travel time on a common vacuum-speed scale. Replacing air with glass at one part of a wavefront delays that portion. A prism gives a varying thickness across the front, producing a tilt. The emerging rays, perpendicular to the tilted front, are deflected.

Optical delay through a simple transparent thicknessLaTeX
The last expression compares a glass thickness ℓ with the same thickness of air approximated by n = 1. Phase delay is 2π times optical-path difference divided by vacuum wavelength.
An ideal converging lens changes the front curvatureFThe thicker centre adds more optical delay.Normals to the emerging fronts converge toward F.
A converging lens reshapes the front— Paraxial ideal-lens schematic. The depicted fronts are circular sections of converging spherical fronts.

A thin converging lens is thicker at the centre, so its central transmitted portion experiences greater material delay. The emerging front curves so that its normals converge toward a focus. Conversely, a diverging lens gives an outward-curving front. Reflection at a concave mirror can turn an incoming plane front into a converging front, while a convex mirror produces diverging reflected fronts. Reversing the propagation through an ideal converging lens lets a point at its focus emerge as a plane-front beam.

For an ideal image-forming system within its model, rays connecting the same object point to the corresponding image point have matching optical phase, expressed as equal optical travel times for the rays considered. Geometrically shorter paths can include more slow material, balancing the time. This is not a universal statement that arbitrary rays through an imperfect spherical lens have identical times: aberrations are precisely where the idealisation fails.

Slower propagation is not lower photon energy

A photon’s energy is hf, where f is frequency and h = 6.626 × 10⁻³⁴ J s is Planck’s constant. At a stationary transparent interface f is unchanged, so a smaller phase speed alone does not lower photon energy. Intensity is energy passing per area and time; in a photon description it also depends on photon flux. Reflection, absorption and the material wave impedance affect transmitted intensity. Therefore neither “the beam loses energy because it slows” nor “its intensity must stay unchanged” follows from a speed change alone.

Extra optical delay

Problem
A 0.60 mm slab of index 1.50 replaces air over the same distance. Find extra optical path and travel-time delay.

  1. 1.Extra optical path is (n − 1)ℓ = 0.50 × 0.60 mm = 0.30 mm.
  2. 2.Extra time is Δ(OPL)/c = 3.0 × 10⁻⁴/(3.0 × 10⁸) = 1.0 × 10⁻¹² s. This changes phase relative to a reference path without changing the temporal frequency.

Quick Quiz

Quiz

Quick check

In the Huygens refraction proof, which pair uses the same time interval?

Explanation: A starts its transmitted wavelet when B is still travelling to C.

Quick check

At a stationary ordinary interface, which remains fixed?

Explanation: Temporal boundary matching preserves the driving frequency.

Quick check

For n₁ = 1.5 and n₂ = 1, total internal reflection can occur when

Explanation: The ray must travel from higher index toward lower index above i_c.

Quick check

The reflection proof gives equal angles because

Explanation: AE and BC have equal length, and the triangles share AC.

Quick check

A stationary transparent interface slows a monochromatic wave. Its photon energy hf

Explanation: Photon energy follows frequency rather than phase speed alone.

Practice Problems

Practice Problems
  1. Air light with wavelength 600 nm enters index 1.50 glass at 30°. Find transmitted angle, speed, wavelength and frequency.
  2. Derive Snell’s law from the two right triangles in the refraction diagram.
  3. Can water of index 1.33 give total internal reflection into glass of index 1.50? Explain; then find the water-to-air critical angle.
  4. Explain how a plane front changes after a thin prism, a converging lens and a concave mirror.
  5. A learner claims that violet light is slower than red in glass, so it must have less photon energy. Correct the reasoning.

Snell gives sin r = sin30°/1.50 = 1/3, so r = 19.5°. Speed is c/n = 2.0 × 10⁸ m/s; frequency is c/λ₀ = 5.0 × 10¹⁴ Hz, unchanged at the stationary interface; wavelength is 600/1.50 = 400 nm. The ray bends toward the normal because speed falls.

Key Takeaways

Key Takeaways

• Huygens refraction geometry compares two distances advanced in the same time. • Snell’s law is n₁ sin i = n₂ sin r with angles to the normal. • Ordinary stationary reflection and refraction preserve frequency. • Wavelength and phase speed change together at fixed frequency. • Total internal reflection requires propagation from higher to lower index above the critical angle. • Equal-speed reflection construction yields i = r. • Optical path accounts for phase delay through varying material thickness. • A lower phase speed alone does not imply lower photon energy or unchanged beam intensity.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…