Skip to lesson content

Lesson 8 of 8

Wave Optics · Lesson 8 of 8

Chapter Summary and Practice

“Integrate wavefront propagation, interference, diffraction and polarisation with assumptions, formula references and mixed model solutions.”

Learning Objectives

• Connect Huygens propagation with interference and diffraction. • Select optical equations with their geometric and coherence conditions. • Solve mixed wavefront, fringe, aperture and filter problems. • Identify missing information and common phase, width and intensity errors.

One framework: propagate a front, then add its contributions

The chapter starts with phase rather than with isolated intensity formulas. A wavefront is a constant-phase surface; in a homogeneous isotropic medium its normal gives the propagation ray. Huygens’ secondary wavelets construct a later front using a common elapsed time. Equal-time right triangles recover reflection and refraction laws. Variable optical delay then explains why a prism tilts a front and why an ideal lens or mirror can create convergence.

Interference follows by adding field contributions with their relative phases. Coherence keeps their relationship stable during measurement. Two narrow openings illuminated from one suitable source generate a fine spatial fringe pattern. A finite single opening instead requires adding contributions across a continuous aperture, yielding diffraction. Both are forms of superposition; their usual names distinguish arrangements rather than separate physical laws. Polarisation adds the transverse direction of the field to this phase-based account.

Choose the model and symbols first

Quantity or conditionMeaningCommon pitfall
λ and λ₀Material wavelength and vacuum wavelengthUsing a material wavelength in c/f without changing speed
i and rNormal-ray angles at an interfaceMeasuring one angle to the surface instead
Δ and φPath difference and relative phaseIgnoring the source phase offset
d and aSlit centre separation and individual slit widthUsing one in place of the other
β and WFine interference spacing and full diffraction central widthMissing a factor of two
I_u and I₁Original unpolarised intensity and intensity after first filterApplying the one-half factor twice

Formula reference with conditions

Propagation and the stationary boundaryLaTeX
v: m/s; f: Hz; λ: m; n dimensionless. Ordinary stationary linear-interface conditions preserve f; the wavelet triangles give the refraction equation. Reflection gives i = r.
Critical angle and optical delayLaTeX
Total internal reflection is for i > i_c. The delay formula compares a thickness ℓ of index n with air approximated by index one. Optical path is in m, and dividing by c gives time.
Coherent equal-field intensityLaTeX
I₀ is one contribution alone. The scalar form assumes matching polarisations and equal amplitudes; random relative phase instead averages to 2I₀. Intensity is in W/m².
Young positions and spacingLaTeX
All distances use compatible units and the wavelength of the common medium. Conditions: stable in-phase slit contributions, near-axis observation, D large compared with d and |y|. Central bright order is zero.
Single-slit minima and central widthLaTeX
Uniform coherent illumination and far-field observation are assumed. W is the full width between the two first minima in the small-angle limit; the half-width is λD/a.
Ideal polarisation filtersLaTeX
The half-factor is for unpolarised input. Malus uses an already linearly polarised input to an analyser. The last relation describes a variable middle filter between crossed outer filters, with I₁ after the first.

Recover the important reasoning chains

For refraction, the two right triangles give sin i = v₁Δt/AC and sin r = v₂Δt/AC. Their ratio cancels the common time and distance, and v = c/n produces Snell’s law. For reflection the two media for the incident and reflected paths are the same, so corresponding wavelet and incident advances are equal, and the right triangles are congruent. These arguments explain angle laws without claiming to calculate reflectance.

For interference, the cosine-sum identity turns two equal fields into one oscillation with amplitude magnitude |2a cos(φ/2)|; squaring gives the intensity factor. For Young geometry, rationalising r₂ − r₁ gives 2yd/(r₁ + r₂), approximately yd/D. Integer and half-integer path conditions then give the two order families. Coincident colours require matching integer wavelength multiples, not matching the same order number for unequal wavelengths.

For slit diffraction, pair equal contributions separated by half the slit width when a sinθ = λ. Every pair then differs by λ/2 and cancels. The negative and positive first minima are each λD/a from the centre in the near-axis model, giving full width 2λD/a. For a polariser, project the field with cosθ and square only afterward. Averaging cos²θ over unpolarised directions gives one half; projecting three ordered filter outputs gives the sin²2θ relation.

An integrated worked example

Two pattern scales in one apparatus

Problem
Two slits each 0.050 mm wide have centre separation 0.30 mm. For 600 nm light and a 1.5 m far screen, estimate fine spacing and diffraction central width.

  1. 1.Interference uses d: β = λD/d = (600 × 10⁻⁹)(1.5)/(0.30 × 10⁻³) = 3.0 mm.
  2. 2.Diffraction uses a: W = 2λD/a = 0.036 m = 36 mm. Thus W/β = 12.
  3. 3.The broad envelope and fine fringes coexist. The ratio is a width comparison, not an automatic count of all visible bright peaks: edge minima and missing orders require care.
A consistency check for three filters

Problem
An original unpolarised 64 W/m² beam crosses filters at 0°, 45° and 90°. What should a meter after each read ideally?

  1. 1.Readings are 32, 16 and 8 W/m². Each stage is at most its own input.
  2. 2.Removing the middle filter makes the outer crossed pair transmit zero, but this does not imply that the inserted filter produces power. It changes which polarisation component the last filter receives.

Misconceptions to check before independent practice

Equal phase is not equal amplitude. Same colour is not sufficient for coherence. Dark-fringe cancellation is not disappearance of source energy. A wave slows in a material without necessarily losing photon energy; boundary reflection and material absorption still affect beam power. Polarisation axes do not label the direction of travel. Finally, missing apparatus geometry cannot be repaired by guessing a distance from a familiar-looking exercise.

Static diagrams reveal geometry and phase relationships, but changing d, a, wavelength or analyser angle is especially suitable for future interactive exploration. A useful activity asks for a prediction first, changes one variable, and then compares the observed change with β ∝ 1/d, W ∝ 1/a or I ∝ cos²θ. The lesson content supplies the full reasoning without depending on an unimplemented interactive feature.

Ideal narrow-slit interference profileI0β2βyEqual bright-to-bright spacing; dark fringes lie halfway.
Recall the interference pattern— Ideal narrow-slit profile; the finite slit adds a broader diffraction envelope.
Single-slit far-field intensityI/I_c-3-2-10123u = a sin θ / λZeros at nonzero integers; central peak spans −1 to +1.
Recall the single-slit central maximum— Normalised far-field profile with minima at nonzero integer a sinθ/λ.

Quick Quiz

Quiz

Quick check

Which quantity defines a wavefront?

Explanation: Phase defines the surface even if amplitude varies along it.

Quick check

Which two scales control a real double-slit fine spacing and broad envelope?

Explanation: Fine spacing depends on d; the broad aperture pattern depends on a.

Quick check

The full diffraction central width is approximately

Explanation: It spans both sides from one first minimum to the other.

Quick check

For an originally unpolarised beam and three ideal axes 0°,45°,90°, the final fraction is

Explanation: The first stage halves intensity and the next two projections each give another half.

Quick check

The first positive coincidence for 650 nm and 520 nm is determined by

Explanation: Matching integer path wavelengths selects fourth and fifth bright orders.

Practice Problems

Practice Problems
  1. A 589 nm air wave strikes water of index 1.33 at a stationary interface. State reflected and refracted frequency, speed and wavelength.
  2. Identify the wavefront from a point emitter, after a converging lens with a point at its focus, and from a distant star over a small Earth-based observation patch.
  3. An index 1.50 glass is used at a specified visible wavelength. Find its speed. Does that single value prove speed is independent of colour?
  4. Slit separation is 0.28 mm, D = 1.4 m and the fourth bright order lies 1.2 cm from the central bright. Find wavelength and the spacing.
  5. For initially in-phase equal coherent contributions, intensity at Δ = λ is K. Find intensity at Δ = λ/3 and explain why the two source intensities are not simply added.
  6. For two wavelengths 650 nm and 520 nm, find the third 650 nm bright position and first positive coincidence if D/d is not specified.
  7. Derive the critical angle for index 1.50 glass to air, and decide whether i = 30° and 50° give a propagating transmitted ray.
  8. At a far screen D = 2.0 m, a 0.20 mm single slit receives 600 nm light. Find the first-minimum positions, central full width and change if a is halved.
  9. An unpolarised beam of 96 W/m² passes ideal filters at 0°, 30° and 90°. Find successive intensities and compare with a 45° middle filter.
  10. Explain what happens to a real double-slit pattern when the slit separation increases, one slit closes, and both open slits acquire perpendicular polarisations.

Frequency f = 3.0 × 10⁸/(589 × 10⁻⁹) = 5.09 × 10¹⁴ Hz for both. Reflection stays in air, so speed is approximately 3.0 × 10⁸ m/s and wavelength 589 nm. Water speed is 2.26 × 10⁸ m/s and wavelength is 443 nm. The smaller wavelength comes with smaller speed, while frequency remains fixed.

Key Takeaways

Key Takeaways

• Wavefronts describe phase geometry; their normals give rays in the isotropic model. • Equal-time Huygens constructions recover reflection and refraction angle laws. • Stationary interfaces preserve frequency while phase speed and wavelength can change. • Coherent field addition gives phase-dependent intensity rather than a simple intensity sum. • Young spacing is λD/d under the near-axis assumptions. • Single-slit full central width is approximately 2λD/a in the far field. • Polarisation filters select transverse field components and obey projection-squared intensity rules. • A valid calculation states its intensity reference, geometry, units and missing inputs.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…