Skip to lesson content

Lesson 1 of 8

Wave Optics · Lesson 1 of 8

Wavefronts and Huygens’ Principle

“Build the wavefront model of light and distinguish phase surfaces, propagation rays and electric-field oscillations.”

Learning Objectives

• Identify spherical, plane and converging wavefronts. • Explain Huygens’ forward-envelope construction and its limits. • Distinguish a propagation ray from a wavefront and a field arrow. • Explain why the ray model works when wavelength is small compared with relevant dimensions.

Why a ray description sometimes fails

A mirror can direct light into a sharply defined beam, yet light passing a narrow opening also spreads into what a straight-ray drawing would call shadow. A pair of openings can create alternating bright and dark regions even when each opening alone illuminates the region. These observations need a wave description. Ray optics remains useful, but its validity depends on scale rather than on light ceasing to be a wave.

Historically, both particle-like and wave-like models reproduced some optical laws. They differed on a testable prediction: when light bends toward the normal on entering water, the elementary wave model predicts a lower propagation speed. Measurements confirm that light travels more slowly in water than in air. Interference and diffraction give further evidence of its wave behaviour. The electromagnetic description explains why light can also travel through vacuum; a material carrier like air is unnecessary.

Recall what phase means

For a sinusoid, phase specifies the stage in a cycle. Two oscillations in phase reach a positive maximum together, cross zero together and reach a negative maximum together. They can be in phase while having different amplitudes. A quarter-cycle phase difference corresponds to π/2 radians; a whole cycle corresponds to 2π. Repetition in time gives period T and frequency f = 1/T, while repetition in space gives wavelength λ.

A simple travelling field componentLaTeX
E_y is a signed field component in V/m. A field graph is not the shape of a material string. In a homogeneous medium, phase speed is v = ω/k = fλ.

At one instant, collect all neighbouring points that share a chosen continuous phase value. This constant-phase surface is a wavefront. A drawing on a page generally shows only its cross-section as a line or curve. Successive crests one wavelength apart share phase modulo 2π but are drawn as distinct members of a family of fronts. The definition is about phase, not an extra requirement that amplitudes must be equal everywhere on the surface.

Spherical, plane and converging fronts

A point source in a uniform isotropic medium produces outward spherical wavefronts. A sphere grows outward as time advances; normals to it are radial propagation directions. Far from the source, a sufficiently small patch has little noticeable curvature and can be approximated as a plane. Light arriving from a distant star therefore has an almost plane front over a small observation region, even though the whole front is part of a vast sphere.

Wavefronts and rays: different geometrical objectsPoint sourcePlane waveBlue: equal-phase surfaces in cross-section.Red: propagation normals in a uniform isotropic medium.
Wavefronts and propagation normals— Spherical fronts are shown as circular sections. The arrows indicate travel, not the transverse electric field.

A wave converging toward a focus also has spherical fronts in the ideal model, but their radius shrinks rather than grows. Shape alone does not determine whether a wave is diverging or converging: direction arrows and time order are needed. A collimated beam has approximately plane fronts, whose normal rays are parallel. A cylindrical source can produce cylindrical fronts; the form follows the source and geometry rather than a rule that every wavefront must be a plane.

SituationIdeal wavefront shapePropagation directions
Small point emitterExpanding sphereRadially outward
Point source at the focus of an ideal converging lensPlane after the lensParallel to the optical axis
Parallel light approaching an ideal lens focusConverging sphere after the lensToward the focus
Small patch of light from a distant starApproximately planeApproximately parallel

Huygens’ geometrical construction

Suppose the current front and the local propagation speed are known. Treat every point of that front as contributing a secondary wavelet. After the same time interval Δt, each wavelet has advanced a distance vΔt in a homogeneous isotropic medium. The common forward envelope tangent to all the wavelets gives the next front. An envelope is not the sum of their drawn radii: it is the surface just touching the outward edges of the secondary wavelets.

A new plane front from secondary waveletsold frontforward envelopeEqual time Δt → each wavelet radius is vΔt.
The plane-front construction— Only selected wavelets are drawn. The full construction uses contributions over the front, not just three physical emitters.

For an old plane front, equal-radius wavelets share a parallel plane envelope, displaced by vΔt. For a spherical old front centred at a source, the forward envelope is another sphere with the same centre and radius increased by vΔt. Thus the construction propagates both familiar shapes using one idea. If speed changes across an interface, wavelets that have entered the new medium expand at a different rate, and the envelope can tilt.

Advance of a front in a uniform mediumLaTeX
s and λ are lengths in m; v is in m/s; Δt and T are in s. Advancing one period moves the phase by one wavelength.

Simple isotropic wavelets drawn as full spheres also allow a backward envelope. The elementary geometrical construction alone does not rigorously explain why the observed field from an outgoing source has the required directionality. A more complete wave treatment uses phase, amplitudes and boundary conditions. We use the forward construction as a propagation tool rather than pretending it is a complete microscopic account of radiation.

How far does a front advance?

Problem
In a transparent medium, light speed is 2.0 × 10⁸ m/s. Find its advance in 3.0 fs.

  1. 1.Convert 3.0 fs to 3.0 × 10⁻¹⁵ s. Then s = vΔt = 6.0 × 10⁻⁷ m = 600 nm.
  2. 2.The result is a front displacement. It is not the amplitude of the transverse electric field, which has different units.
A distant wavefront

Problem
Why can a telescope treat a small patch of starlight as a plane wave without claiming that the entire wavefront is flat?

  1. 1.A large-radius sphere has very little curvature over a small patch. Its neighbouring normals are nearly parallel, so the plane approximation is accurate locally.
  2. 2.A nearby point source has greater curvature over the same patch. The approximation depends on patch size compared with curvature radius, not simply the name of the source.

Recovering the ray limit

In a homogeneous isotropic transparent medium, energy propagation is along the wavefront normal. These normals provide the rays of geometrical optics. Wavefront normals do not indicate the oscillation direction of the electric field: for a transverse light wave the electric field is perpendicular to propagation. The normal-ray relation needs qualification in anisotropic materials; those are outside the simple model used here.

For visible light λ is of order 0.5 μm, far smaller than a centimetre-sized mirror or lens. Away from sharp boundaries and diffraction-sensitive focusing limits, ray methods often give a good approximation. The approximation formally neglects finite wavelength compared with relevant geometric scales. Diffraction never becomes a fundamentally different physical process; its spreading simply becomes difficult to notice on the observation scale.

A scale check

Problem
Compare 600 nm light with an aperture 1.0 cm wide and one 3.0 μm wide.

  1. 1.The ratios λ/a are 6.0 × 10⁻⁵ and 0.20 respectively. The latter is much larger, so angular spreading is much more pronounced.
  2. 2.This is a qualitative scale comparison. Exact pattern predictions also need the aperture shape, illumination and observation distance.

Quick Quiz

Quiz

Quick check

A wavefront is defined by equal

Explanation: Equal phase defines the surface; equal amplitude is not required.

Quick check

For spherical fronts converging to a focus, successive radii

Explanation: A converging front moves toward its centre of convergence.

Quick check

Which arrow is normal to a plane wavefront in the isotropic model?

Explanation: The normal points along propagation, not along transverse E.

Quick check

In a time Δt each secondary wavelet advances by

Explanation: Speed times time gives a distance.

Quick check

A small patch of a very large spherical wavefront is approximately

Explanation: Its curvature is negligible over a sufficiently small patch.

Practice Problems

Practice Problems
  1. Describe the fronts from a point source, after an ideal lens when the source is at its focus, and from a distant star over a small local patch.
  2. Light of frequency 5.0 × 10¹⁴ Hz travels at 2.0 × 10⁸ m/s. Find its period and wavelength and interpret each.
  3. Use a plane-front sketch to explain why the later envelope stays parallel to the original front.
  4. A learner draws E arrows along outward normal rays and calls them the polarisation direction. Correct the diagram description.
  5. Why is diffraction much less evident for a 5 mm aperture than for a 5 μm aperture with the same visible light?

The point source gives outward spherical fronts. The source at a converging lens focus produces approximately plane outgoing fronts and parallel rays. A distant star supplies a small patch of a huge spherical front that is locally plane. These are ideal homogeneous/paraxial descriptions, not claims that real optics has no aberrations.

Key Takeaways

Key Takeaways

• A wavefront is a surface of constant phase. • Spherical fronts may diverge or converge; arrows and time order distinguish them. • Plane fronts have parallel propagation normals in the isotropic model. • Huygens’ forward envelope advances each point by the same propagation time. • The elementary construction is not a complete theory of backward-wave cancellation. • Propagation rays differ from transverse field-oscillation arrows. • Ray optics is an approximation that neglects finite wavelength on the relevant geometric scale.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…