Skip to lesson content

Lesson 6 of 8

Wave Optics · Lesson 6 of 8

Single-Slit Diffraction and the Limits of Ray Optics

“Explain spreading and dark minima from one finite slit, interpret central width and connect diffraction with resolution.”

Learning Objectives

• Explain why a single illuminated slit gives bright and dark regions. • Use pair cancellation to identify diffraction minima. • Distinguish full central width from half-width and from two-slit spacing. • Describe safe observations and qualitative diffraction limits on optical resolution.

One opening can create interference within its own transmitted wave

Light through a finite aperture spreads beyond the region suggested by straight rays. This is diffraction. The opening contains a continuous distribution of illuminated wavefront elements, each contributing to the field at an observation point. Their phase differences depend on position and direction. “One slit” is therefore not equivalent to “one indivisible point contribution” when predicting its angular pattern.

Sound bending around a doorway and water waves spreading past an opening illustrate the same broad wave principle. Visible-light spreading is often smaller because its wavelength is tiny compared with ordinary objects, but it becomes important near edges, in narrow openings and in finely focused optical systems. The coloured appearance of a compact disc is another diffraction effect, though its many-track geometry differs from the single slit studied here.

The far-field geometry

One slit supplies many coherent contributionsaθEdge-to-edge path difference = a sin θNormal incidence gives equal starting phase across the slit.
Different parts of one slit contribute at different phase— Parallel outgoing rays represent nearly the same observation direction in the far field. Slit width a is not the two-slit separation d.

Let a normally incident plane monochromatic wave illuminate a slit uniformly across width a. Contributions start in phase. At a far-away screen point in direction θ, the rays from the slit are approximately parallel. The edge-to-edge path difference is a sinθ. This is a far-field description: it applies sufficiently far from the aperture, or in the focal plane of a suitable lens. Close to the slit the detailed near-field pattern differs.

Along θ = 0, all parts travel with matching phase and add constructively, giving the central maximum. At other angles the path varies continuously across the slit. One cannot apply the two-source rule directly to just the two edges and ignore everything between them. A complete continuous aperture sum is required for the full profile, but a pairing argument explains the positions of the dark minima without advanced integration.

Pair cancellation at the first and later dark directions

If a sinθ = λ, divide the slit into two equal halves. Pair each point in the upper half with a point a/2 lower down. Each pair has path difference (a/2)sinθ = λ/2 and therefore opposite phase. Uniform illumination gives matching amplitudes, so all paired contributions cancel. The two edges themselves differ by a whole wavelength, yet the whole aperture gives zero because of the intervening contributions.

For a sinθ = 2λ, split the slit into four equal strips and pair adjacent strips. The strip separation a/4 gives a half-wavelength difference. More generally, at a sinθ = mλ with nonzero integer m, divide into 2|m| strips and pair neighbours. This supplies all the dark directions admitted by the model. m = 0 must be excluded: there the fields are in phase and add to the strongest central maximum.

Single-slit dark minimaLaTeX
a and λ are in m. A given minimum exists as a propagating direction only if |mλ/a| ≤ 1. This differs from the bright condition for two point-like slits.

Between the minima, cancellation is incomplete and weaker secondary maxima remain. Their locations are near, but not exactly at, half-integer values of a sinθ/λ. Treating those approximate locations as exact would misplace the peaks, particularly the first few. The central maximum is strongest; successive secondary peaks generally weaken for uniform illumination.

Single-slit far-field intensityI/I_c-3-2-10123u = a sin θ / λZeros at nonzero integers; central peak spans −1 to +1.
The central maximum is broad and the side peaks weak— The plotted normalised ideal profile is sinc-squared. Its derivation by a continuous aperture integral is not required here; the minimum locations follow from pairing.

Central half-width and full width

The first dark directions are sinθ₁ = ±λ/a. The angular half-width runs from the centre to one first minimum; the full central angular width runs from the negative first minimum to the positive first minimum. Near the axis, sinθ ≈ θ and screen position y ≈ Dθ. Thus each first minimum is approximately λD/a from the centre, making the full central width twice that distance.

Central width in the small-angle far-field limitLaTeX
θ is in radians; y and W are in m. With a lens observing its focal plane, replace D by focal length f for the paraxial screen conversion. For large angles use the actual sine/tangent geometry.
A central width

Problem
A uniformly illuminated slit is 0.20 mm wide. Light has λ = 600 nm and a far screen is D = 2.0 m away. Find first minimum and full central width.

  1. 1.θ_half ≈ λ/a = (600 × 10⁻⁹)/(0.20 × 10⁻³) = 0.0030 rad.
  2. 2.The first minima lie at y ≈ ±0.0060 m = ±6.0 mm. Full central width is 12.0 mm.
  3. 3.Reporting 6.0 mm as the full central width confuses one side with both sides. Small angle and far-field assumptions are appropriate for this estimate.

At fixed wavelength, narrowing the slit broadens the angular central region. At fixed slit width, red light spreads more than blue. These statements do not mean a narrower aperture makes a larger geometrical hole on the screen. Diffraction is a direction-dependent interference effect. If a < λ, the first-minimum equation has no finite propagating solution away from the forward direction; the small-angle central-width formula then cannot be extended without checking its domain.

Compare one slit with two

FeatureTwo ideal narrow slitsOne uniformly illuminated finite slit
Source contributionsTwo dominant field contributionsContinuous contributions across one aperture
Geometry scaleCentre separation dWidth a
Pattern scale near axisβ = λD/dFull central width ≈ 2λD/a
Peak strengths in simplified graphApproximately equal in a small regionCentral peak dominant; secondary peaks weak
Shared physicsCoherent field superpositionCoherent field superposition

There is no fundamental boundary between “interference” and “diffraction.” The names emphasise different arrangements. A physical double slit produces both: its fine interference fringes are modulated by the broad diffraction envelope of each individual slit. A lens or mirror can focus rays ideally but cannot eliminate finite-aperture diffraction. A point object therefore produces a spread-out image pattern, which limits how close two objects can be before their images become hard to distinguish. We use this qualitative resolution connection without importing a separate resolving-power formula.

Observe the effect with controlled classroom light

Use a prepared single-slit slide or two blunt opaque card edges held in a stable mount, with a modest lamp or a supervised low-power optical setup and a screen. Compare red and blue filters at the same slit width. The broader red pattern supports the wavelength dependence. Narrowing the slit broadens the central region, while total transmitted power generally falls. A lens can form the far-field pattern at its focal plane; the eye lens can also map angular structure onto the retina.

Keep the opening and a narrow lamp filament or line source parallel for clear one-dimensional bands; a broad source washes out the pattern by superposing shifted distributions. Use prepared equipment rather than holding exposed razor edges near the eye. Do not use the Sun or a solar reflection as a viewing source, and do not look into a laser beam. The goal is to compare controlled patterns on a screen, not to obtain maximum source brightness.

A colour and aperture comparison

Problem
At fixed D, compare the central widths for 650 nm and 520 nm at the same a. Then halve a for the 520 nm beam.

  1. 1.At fixed a, W_650/W_520 = 650/520 = 1.25, so the red central width is 25% greater.
  2. 2.Halving a doubles W_520. Compared with the original 650 nm width, the new 520 nm width has ratio 2 × 520/650 = 1.60. Wavelength and aperture changes must be tracked separately.

As with two-slit interference, dark regions reflect cancellation in the local field distribution, not destruction of total energy. A pattern rearranges power among directions. Altering aperture size can also change how much input light is transmitted, so “energy is redistributed” does not imply that two different aperture openings transmit identical total power.

Quick Quiz

Quiz

Quick check

The first single-slit dark condition is

Explanation: Pair points separated by half the slit width; their path difference is λ/2.

Quick check

The full central screen width in the paraxial far field is

Explanation: It spans from the negative first minimum to the positive first minimum.

Quick check

Halving slit width at fixed λ and D makes the central width

Explanation: Diffraction angular spreading varies inversely with a in this limit.

Quick check

Why is m = 0 excluded from a sinθ = mλ as a minimum condition?

Explanation: The central direction gives constructive addition, not pair cancellation.

Quick check

A real double-slit pattern generally consists of

Explanation: Finite widths a and slit separation d introduce two distinct pattern scales.

Practice Problems

Practice Problems
  1. Explain the first dark minimum by pairing contributions across the slit.
  2. A 0.10 mm slit receives 500 nm light. At D = 1.0 m find the first-minimum half-width and full central width.
  3. A slit has width a = 2λ. Which nonzero minimum orders can occur in propagating directions?
  4. For a double slit, d increases while each individual slit width a stays fixed. What happens to the two pattern scales?
  5. Describe an observation that compares red and blue diffraction without using direct solar viewing or loose sharp blades.

At a sinθ = λ, pair each point with one displaced by a/2 across the aperture. Every pair differs in path by (a/2)sinθ = λ/2, corresponding to π relative phase. Uniform illumination gives equal pair amplitudes, so the complete collection cancels. Two edge rays alone would miss this cancellation mechanism.

Key Takeaways

Key Takeaways

• Diffraction is coherent addition across a finite wavefront or aperture. • A single slit has many contributing elements, not only two edges. • Dark minima satisfy a sinθ = mλ for nonzero integer m. • The central direction is a maximum, not the m = 0 minimum. • The full central width is approximately 2λD/a in the paraxial far field. • Narrower apertures and longer wavelengths give stronger spreading. • Real double-slit fringes sit within a diffraction envelope. • Finite-aperture diffraction limits the sharpness of real optical images.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…