Skip to lesson content

Lesson 3 of 8

Magnetism and Matter · Lesson 3 of 8

Torque, Energy and Equilibrium

“Explain the rotation and energy of magnetic dipoles in external fields, with careful signs and stability tests.”

Learning Objectives

• Calculate torque and determine its direction. • Derive potential energy from signed rotational work. • Distinguish zero torque from stable equilibrium. • Calculate external work for slow rotation in a uniform field.

Turning without translating

Place a small magnetised needle at an angle to a nearly uniform external field. It turns even if its centre does not translate. A pair of equal and opposite forces can make a couple: net force is zero but torque is nonzero. For a small fixed dipole in a uniform field, the external field produces this turning effect. An iron nail near a magnet is a different situation: the field is nonuniform, magnetisation is induced, and a net attraction towards a stronger-field region is possible.

Throughout this lesson m is a fixed magnetic moment, B is the external field evaluated at the dipole, and θ is the angle from B to m, between 0 and 180°. A torque relation for a small dipole assumes the external field is nearly uniform over it. Do not substitute the dipole’s own field into the torque formula and claim it turns itself. Internal magnetic stresses can exist, but an isolated rigid magnet does not acquire an overall self-rotating torque from that prescription.

Torque from a rectangular current loop

Consider a rectangular N-turn coil with sides a and b and area A = ab. Let its area normal make angle θ with a uniform B. Choose the pair of sides of length a perpendicular to B. Each experiences force magnitude N I a B. Their opposite forces cancel in translation, but their lines of action have perpendicular separation b sinθ. Multiplying one force by the separation gives the torque magnitude N I a B b sinθ = N I A B sinθ. The other pair contributes no additional torque about the relevant turning axis.

Torque on a magnetic dipoleLaTeX
m in A m² and B in T give torque in N m. The cross-product order is m then B; its right-hand direction is perpendicular to both.

Choose B along +x and let m lie above it in the xy plane, so θ is a counterclockwise angular coordinate. Then m × B points into the page (−z). The signed torque about +z is −mB sinθ. It tends to reduce a small positive θ. The magnitude mB sinθ has no minus sign; a restoring sign belongs to the signed component, not to a negative magnitude.

BmθB along +x; m above +xTorque into page: ⊗; clockwise turn
The direction of m crossed with B— The orientation arrow represents the magnetic moment, not the magnet’s velocity.
Infer a moment from a measured torque

Problem
A magnet at 30° to a 0.25 T uniform field experiences torque magnitude 4.5 × 10⁻² N m. Find m.

  1. 1.The angle is between the magnetic moment and B. Rearrange τ = mB sinθ to m = τ/(B sinθ).
  2. 2.m = 0.045/(0.25 × 0.5) = 0.36 A m².
  3. 3.The units are N m/T = J/T = A m². Torque is not energy, even though both use dimensionally equivalent combinations of base units.

Potential energy from rotational work

For a small rotation dθ, work by the field is τz dθ. Potential energy decreases by that work: dU = −τz dθ = mB sinθ dθ. Here B and m stay fixed while the orientation changes. Integrating with respect to θ gives U = −mB cosθ + C. Choose U = 0 at θ = 90°, making C = 0. Energy differences are independent of this convenient choice.

Dipole energy and slow external workLaTeX
External work equals ΔU for slow rotation with negligible change of kinetic energy and no dissipative loss. Work done by the magnetic torque equals −ΔU.

The dot product selects the component of m along B, giving a scalar energy in joules. Parallel alignment has U = −mB; perpendicular orientation has U = 0; antiparallel alignment has U = +mB. Rotating from parallel to antiparallel slowly requires 2mB of positive external work, even though the torque vanishes at both endpoints. Integrating torque over the full angle, rather than multiplying the final torque by angle, is essential.

Equilibrium is a question about nearby orientations

Both θ = 0 and θ = 180° have zero torque. Near θ = 0, a small displacement creates a restoring torque and increases energy, so parallel alignment is stable. Near θ = 180°, a small displacement lowers energy and the torque drives the moment farther from antiparallel alignment, so it is unstable. If released away from either orientation, the dipole can rotate and oscillate. Without damping it need not settle at the minimum; friction or other damping removes kinetic energy.

U/(mB)θ0°90°180°−10+1stable minimumunstable maximum
Energy against orientation at fixed m and B— The vertical scale is U/(mB); the curve is −cosθ, not a torque graph.
Work is different from final torque

Problem
A 1.5 A m² magnet is initially parallel to B = 0.22 T. Find slow external work to turn it to 90° and 180°, and the torque at those final orientations.

  1. 1.mB = 1.5 × 0.22 = 0.33 J. Initial U is −0.33 J.
  2. 2.At 90°, U = 0 and Wext = 0.33 J; the torque magnitude is 0.33 N m.
  3. 3.At 180°, U = +0.33 J and Wext = 0.66 J; the torque is zero. The latter orientation is unstable despite its zero torque.

Two magnets: use the field at the second magnet

Hold dipole P fixed and constrain the centre of dipole Q at a chosen far-field position. For rotational equilibrium Q must be parallel or antiparallel to the local field of P. On the equator of P that field is opposite mP, so Q can be stably oriented opposite to mP. On the axis stable Q is parallel to mP. At equal large separations the stable axial energy is twice as negative as the stable equatorial energy. This compares orientations with centres held fixed; it does not establish full translational stability of two freely moving magnets.

Quick Quiz

Quiz

Quick check

A fixed dipole in a uniform field at 90° experiences

The uniform-field net force is zero, but sin90° = 1 gives maximum turning torque.

Quick check

With U = 0 at 90°, stable alignment has energy

Parallel m and B give U = −mB, the minimum.

Quick check

External work for slow rotation from 0° to 180° is

The energy rises from −mB to +mB, a difference 2mB.

Quick check

Which zero-torque orientation is unstable?

A small perturbation from antiparallel lowers energy and produces a torque away from that orientation.

Quick check

For m along +y and B along +x, the torque points

The ordered cross product y × x equals −z.

Practice Problems

Practice Problems
  1. Find the stable and unstable energies for m = 0.32 A m² and B = 0.15 T.
  2. A 2000-turn coil of area 1.6 × 10⁻⁴ m² carries 4.0 A in a 0.075 T uniform field at 30°. Find m, net force and torque.
  3. Derive U from the signed torque and state the reference used.
  4. A 0.40 A m² magnet in 0.20 T rotates slowly from 60° to 120°. Find external and field work.
  5. P is fixed with mP towards +x. Q can rotate at a fixed equatorial point. Which way should mQ point for stable rotational equilibrium, and why does this not imply complete mechanical stability?

Compute mB = 0.048 J. Parallel is stable with U = −0.048 J; antiparallel is unstable with U = +0.048 J. Both have zero torque, so energy curvature distinguishes them.

Key Takeaways

Key Takeaways

• For a fixed small dipole in uniform external B, net force vanishes but torque may not. • Torque is m × B, with magnitude mB sinθ and direction fixed by the cross-product order. • Energy is −m·B when its zero is chosen at 90°. • Parallel alignment is stable; antiparallel alignment is unstable. • Slow external work is the energy increase, and differs from the work of the field. • Zero torque at the endpoints does not imply zero work between them. • For two dipoles, orientation stability must be assessed using the local field.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…