Magnetism and Matter · Lesson 1 of 8
Bar Magnets, Field Lines and Equivalent Solenoids
“Connect observations of magnets with magnetic-field maps and the current-loop model of magnetic moment.”
• Use a compass to infer magnetic-field direction. • Explain why cutting a magnet does not isolate a pole. • Determine the direction and magnitude of a solenoid’s magnetic moment. • Distinguish a field-line representation from a force or particle path.
From a turning compass to a magnetic field
A compass needle turns when a nearby magnet is moved, even though the two objects do not touch. We describe that interaction by assigning a magnetic field B to each point. A sufficiently small compass probes the field: its north-seeking end settles along the local field when friction is small. The compass itself slightly disturbs the field, so field mapping uses a probe weak enough for that disturbance to be negligible. B is a vector, measured in tesla (T). Its direction and magnitude can change from point to point.
A freely suspended bar magnet approximately follows the local north–south direction. The end seeking geographic north is named N; the other is S. Earth’s field is not exactly along geographic north and is generally tilted relative to the horizontal. Near geographic north Earth behaves approximately as a magnetic south pole, which attracts the north-seeking compass end. These names describe behaviour; they do not imply isolated magnetic charges inside the material.
Poles remain paired when a magnet is cut
Like facing poles repel and unlike facing poles attract. Cutting a uniformly magnetised bar across its length exposes new opposite pole regions at the cut. Each piece is again a magnet. Splitting it lengthwise also produces two magnets, each with both poles. Repeating the process does not separate N from S. No isolated magnetic monopole has been experimentally established; ordinary magnetic phenomena obey a field law with no magnetic-charge sources.
For ideal cuts that leave magnetisation unchanged, magnetic moment is proportional to the remaining volume. Equal halves therefore have half the original moment, whether the cut is transverse or longitudinal. This is a model prediction, not a guarantee about damaged material: cutting, heating and changing shape can alter domain arrangements and the measured moment.
Reading a field-line map
A field line is drawn so that its tangent points along B. Outside a bar magnet its arrows go from N towards S; inside they return from S towards N. In a complete bar-magnet map the curves close. Where lines are more crowded in an equally sampled drawing, the field is stronger. The number of lines drawn is a graphical choice; there are no literal threads to count. Lines do not cross at a point where B has a unique nonzero direction. At a true zero of B the tangent direction is undefined.
To map the field, place a bar magnet under a nonmagnetic sheet, mark several positions, and record the direction of a small compass at each. Join short tangent segments consistently. First record the background field with the magnet absent; it matters far from the magnet. Iron filings show approximate local orientations because each filing becomes magnetised, but filings aggregate and disturb the field. They reveal a pattern rather than a calibrated measurement of strength.
A negative charged particle moves parallel to a field line. Must it be pushed along that line? No. Magnetic force is q(v × B), so the magnetic part is zero for parallel motion. For perpendicular motion the force is perpendicular to B. A compass alignment direction is not a force direction for a moving charge.
The equivalent solenoid and magnetic moment
A finite current-carrying solenoid produces an external field resembling that of a bar magnet and a return field inside. Looking into one end, anticlockwise conventional current makes that face N; clockwise makes it S. Curl the fingers of the right hand with the conventional current: the thumb gives the magnetic moment direction, from S towards N through the coil. Reversing the current reverses the moment and poles.
Adding the moments of many turns
For one planar loop the moment magnitude is current times its enclosed area, IA. Its direction is the right-hand normal to that area. In a closely wound coil with N identical turns, all area normals point the same way, so their moments add. Here N is the number of turns and must not be confused with the north-pole label.
The current-loop analogy does not mean a permanent magnet contains literal wire windings or classical electrons circling in fixed planetary orbits. Atomic orbital magnetism and intrinsic electron spin contribute to material moments. Spin is a quantum property, not the mechanical rotation of a tiny charged ball. The solenoid is an effective field model whose success can be tested with a compass.
Problem
A 600-turn coil has area 3.0 cm² per turn and carries 2.0 A. Find its moment and the effect of reversing current.
- 1.Convert area: 3.0 cm² = 3.0 × 10⁻⁴ m². The square on the centimetre conversion is essential.
- 2.m = NIA = 600 × 2.0 × 3.0 × 10⁻⁴ = 0.36 A m².
- 3.The direction is the right-hand normal. Reversing current leaves the magnitude 0.36 A m² but reverses the vector and interchanges N and S.
Problem
Two similar bars are available; at least one is magnetised. What can attraction, repulsion and end-to-middle tests establish?
- 1.Bring different ends towards each other. Clear repulsion establishes that both are magnetised; attraction alone is insufficient because a magnet also attracts initially unmagnetised iron by induction.
- 2.For ideal slender bars when only one is magnetised, compare an end of A near an end and then near the middle of B. A magnet pole can induce attraction in unmagnetised iron at either location; the equatorial region of a long bar magnet normally interacts much less strongly than its pole region with a test iron bar.
- 3.Thus a much weaker end-to-middle interaction, with B as the bar being approached, suggests B is the magnet. Repeat with the roles exchanged. The central interaction is not exactly zero in general; geometry, induced moments and sensitivity limit this qualitative method.
Quick Quiz
Quiz
The field inside a bar magnet points approximately
The return path through the material is S to N, completing the field-line pattern.
A uniformly magnetised bar is divided into equal transverse halves without changing magnetisation. Each half has
Each half retains paired pole regions and half the volume, so its moment is halved.
Viewed into one coil face, conventional current is anticlockwise. That face is
The right-hand normal points towards the observer, making this the north face.
A compass at a point primarily shows
Its north end aligns with B; force on a charge additionally depends on velocity and charge sign.
At fixed N and I, doubling the area of each planar turn changes m by
The coil relation m = NIA is directly proportional to area at fixed current and turn count.
Practice Problems
- Calculate the moment of 800 turns of area 2.5 × 10⁻⁴ m² carrying 3.0 A.
- Compare equal transverse and longitudinal cuts of an ideally uniformly magnetised bar.
- Design a compass procedure that distinguishes a magnet’s field from Earth’s field.
- Why do a neutral current loop and an ordinary uncharged magnet still produce B?
- A field sketch has two crossing lines at a point where B is nonzero and shows all arrows ending inside N. Diagnose it.
The aligned turn moments add: m = NIA = 800 × 2.5 × 10⁻⁴ × 3.0 = 0.60 A m². The vector direction is determined by the right-hand rule for the conventional current.
Key Takeaways
• B is a vector field measured in tesla; a weak compass probes its direction. • Ordinary magnets remain dipoles after cutting. • Bar-magnet field lines return through the material from S to N. • Field lines are representations, not force paths for charged particles. • A coil has moment m = NIA, directed by conventional current and the right-hand rule. • The solenoid analogy is an effective model; atomic spin is intrinsically quantum.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…
Previous
Start of chapter
Next · Lesson 2
Magnetic Dipole Fields