Magnetism and Matter · Lesson 4 of 8
Magnetic Flux and Gauss’s Law
“Interpret signed magnetic flux, distinguish open and closed surfaces, and use Gauss’s law to evaluate field-line drawings.”
• Calculate flux through a flat surface with an oriented area normal. • Explain why closed-surface magnetic flux vanishes. • Distinguish zero net flux from zero magnetic field. • Identify invalid magnetic field-line configurations.
Count perpendicular passage, with a sign
Imagine a flat rectangular frame in a uniform magnetic field. Rotating the frame changes how much field passes through it even though B and the frame’s area are unchanged. The relevant angle is between B and the normal to the surface, not between B and the surface itself. An area vector has magnitude equal to area and direction perpendicular to it. For an open surface we choose one of the two normals as positive; reversing that choice reverses the sign of flux.
If the normal is parallel to B, flux is +BA. If it is antiparallel, flux is −BA. If B lies in the surface, the normal is perpendicular to B and flux is zero. A field can therefore be nonzero while its flux through a particular surface is zero. Flux is not magnetic-field magnitude times any arbitrary area: the orientation or vector-area element must be specified.
Problem
A flat frame of area 20 cm² is in B = 0.30 T. Its chosen normal makes 60° with B. Calculate the flux.
- 1.Area is 20 × 10⁻⁴ = 0.0020 m². Use the angle to the normal.
- 2.ΦB = 0.30 × 0.0020 × cos60° = 3.0 × 10⁻⁴ Wb.
- 3.Choosing the opposite normal changes the angle to 120° and the flux to −3.0 × 10⁻⁴ Wb, while the physical field and frame stay unchanged.
A closed surface has outward normals
A box or sphere encloses a volume and has no boundary edge. Each small surface element uses its outward normal. A field entering the enclosed region gives negative flux; a field leaving gives positive flux. On a curved surface or in a varying field, divide the surface into small patches and add the contributions B·ΔA. The integral is the limit of that sum as the patches become very small.
There is no net magnetic charge enclosed by an ordinary closed surface. Field entering and leaving balance in signed flux. A surface enclosing only the visible N end of a bar magnet still has zero flux: the surface necessarily also cuts through the material, where return flux enters. Ignoring this less visible contribution is the mistake behind treating a magnetic pole as an isolated charge.
Checking a uniform field with a rectangular box
Take a box with two faces of area A perpendicular to a uniform B. The outward normal on the exit face is parallel to B, so that face contributes +BA. On the entrance face it is antiparallel, giving −BA. B lies tangent to the other four faces, so each contributes zero. Adding gives BA − BA = 0. This example illustrates the general law; it is not a proof limited to boxes or uniform fields.
What the law does and does not say
Zero total flux does not imply B = 0 anywhere. The closed-box example contains a nonzero uniform field throughout. Gauss’s law constrains net flux; unlike some highly symmetric electrostatic problems, it cannot by itself determine the magnitude of an arbitrary magnetic field. It also differs from Ampère’s law, which concerns circulation around a closed curve and links magnetostatic circulation to enclosed current.
For ordinary bar magnets and solenoids, complete drawn field paths return through the source. An ideal infinite straight wire instead has circular field lines around its axis and no N or S ends. An ideal toroid can have its field confined inside the windings and a zero total dipole moment, despite a nonzero internal B. Not every magnetic configuration resembles a two-ended bar. More generally magnetic lines have no magnetic-charge starts or stops; it is unnecessary to claim every possible field line closes into a finite loop.
Diagnosing drawings with both flux and circulation
| Proposed sketch | Diagnosis and reason |
|---|---|
| Radial lines leaving an isolated point | Invalid for an ordinary magnetic source: a surrounding sphere has positive net B flux. It can describe an electric charge. |
| Crossing lines at a nonzero field point | Invalid: two tangents would specify two different directions. |
| Circular lines around a current-carrying straight wire | Valid: the circles link current, rather than beginning on it. |
| Closed magnetostatic loop spanning only current-free space | Nonzero circulation cannot satisfy Ampère’s law with zero net linked current. |
| Finite solenoid with lines ending at its faces | Invalid: return paths and end fringing are missing. |
| Ideal toroid with closed internal paths | Valid idealisation; real windings may produce small leakage fields. |
| Two finite pole faces with no edge fringing | An exact abrupt truncation is not valid; a nearly uniform central gap is an approximation. |
| Opposite charged plates with lines beginning/ending at surfaces | Possible for electric fields; B lines must continue through or around magnetic material. |
Hypothetically, if magnetic monopoles were found, Gauss’s law would require a source term proportional to enclosed magnetic charge. The coefficient depends on how magnetic charge is defined. Under one common pole-strength convention the right-hand side is μ₀qm. This is a conditional model, not evidence that cutting magnets creates monopoles. Likewise, forces between different current elements can create internal wire stresses without producing a net self-force on an isolated complete system.
Quick Quiz
Quiz
A flat surface is parallel to a nonzero uniform B. Its magnetic flux is
The area normal is perpendicular to B, so cosα = 0.
The magnetic flux through any ordinary closed surface is
Magnetic Gauss’s law requires zero net signed flux, including when magnets are enclosed.
Zero net flux through a closed box proves
Nonzero fields, currents and magnets can all be present while total B flux vanishes.
The SI symbol for the unit of magnetic flux is
Weber is Wb; W is watt, a unit of power.
A surface surrounds just the N end of a bar magnet. The return flux
The closed surface cuts through the bar, where the internal return field supplies the balancing flux.
Practice Problems
- A 0.020 m² surface has its normal 30° from B = 0.40 T. Calculate signed flux.
- A uniform 0.50 T field crosses opposite 0.010 m² faces of a cube normally. Find flux through each face and through the whole cube.
- Five faces of a closed box have total signed flux +3.0 × 10⁻⁴ Wb. Find flux through the sixth.
- Why is a field sketch with a finite solenoid and perfectly confined straight lines right up to its open ends incomplete?
- Explain why circular magnetic field lines around a wire do not mean particles follow circles along those lines.
ΦB = BA cos30° = 0.40 × 0.020 × 0.8660 = 6.93 × 10⁻³ Wb. The sign is positive because B has a positive component along the selected normal. Reversing the normal reverses the sign.
Key Takeaways
• Magnetic flux uses the angle between B and the area normal. • Flux is a signed scalar in Wb; B is a vector in T. • Outward normals determine signs on a closed surface. • The net B flux through every ordinary closed surface is zero. • Zero net magnetic flux does not imply zero magnetic field. • Fields need not have bar-magnet-like N and S ends. • Use both Gauss’s law and Ampère’s law to diagnose magnetostatic drawings.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…