Skip to lesson content

Lesson 2 of 8

Magnetism and Matter · Lesson 2 of 8

Magnetic Dipole Fields

“Calculate and interpret the far fields of bar magnets and solenoids, including their directions and limitations.”

Learning Objectives

• Identify axial and equatorial observation points. • Apply the dipole-field formulas with the correct directions. • Explain the inverse-cube distance dependence within the dipole approximation. • Compare electric and magnetic dipole models without identifying their sources.

Location matters as much as distance

Two compasses equally far from a magnet’s centre need not see equal fields. One lies on the long axis; the other lies on the perpendicular bisector, called the equatorial line in a plane or equatorial plane in three dimensions. Far from a compact magnet the field is dominated by its magnetic dipole moment. The distance r is measured from the centre, and must be much larger than every relevant dimension of the magnet or coil. The approximation does not describe the field right next to a pole.

Choose the moment m to point along +x, from S to N. At either axial point the field points along +x: on the N side it points away from N; on the S side it points towards S. At an equatorial point the field points along −x, opposite to the moment. A minus sign in a vector equation expresses a direction, not a negative field strength.

Far field on the axisLaTeX
Applicable in vacuum or approximately air at distances much larger than magnet size. μ₀ ≈ 4π × 10⁻⁷ T m/A; m is in A m² and r in m.
Far field on the equatorial planeLaTeX
The field magnitude is positive; the minus sign means opposite to the magnetic moment. At equal large r the axial magnitude is twice the equatorial magnitude.
SNEquatorial: B opposite mm directionAxialAxial
Axial and equatorial field directions— Schematic positions; use dipole formulas only far from the magnet.

Why a solenoid has the same far axial field

Recall the axial field of a thin circular loop of radius a, at distance r from its centre: μ₀Ia² divided by 2(r² + a²)³ᐟ². This starting result follows from the Biot–Savart law; its complete integration belongs with current-produced fields. At r much greater than a, a² is small beside r² in the denominator. For a compact N-turn coil, also require r much greater than its length, so each turn is approximately equally distant from the observation point.

Dipole limit of a compact coilLaTeX
The approximation replaces (r² + a²)³ᐟ² by r³ and uses A = πa². This is a far-field argument, not an exact near-field formula for a finite solenoid.

The dimensions check: (T m/A)(A m²)/m³ gives tesla. The factor 2 distinguishes axial from equatorial geometry, while r⁻³ expresses how a dipole field falls off. Doubling r reduces either far-field magnitude by eight at the same angular position; tripling it reduces the field by twenty-seven. These statements hold when m stays fixed and both positions remain in the far region.

Using an electric-dipole analogy carefully

FeatureElectric dipoleMagnetic dipole
Moment directionFrom negative to positive chargeFrom S towards N for a bar magnet
Far axial fieldAlong electric moment; coefficient 2Along magnetic moment; coefficient 2
Far equatorial fieldOpposite electric momentOpposite magnetic moment
Field coefficient1/(4πε₀)μ₀/(4π)
Sources and field pathsElectric lines begin/end on chargeMagnetic B has no ordinary isolated pole source

The shared far-field shape allows formulas to be compared after replacing electric moment by magnetic moment and the field coefficient appropriately. It does not allow us to insert a real magnetic charge into a magnet or to copy electric field lines through its interior. The moments also have different units: C m for an electric dipole, A m² for a magnetic dipole.

Equal distance, different directions

Problem
A short magnet has m = 0.48 A m² towards +x. Find its field 10 cm from the centre on the axis and on the equator, assuming 10 cm is much larger than its size.

  1. 1.Use r = 0.10 m, so r³ = 0.001 m³. The common factor μ₀m/(4πr³) = 10⁻⁷ × 0.48/0.001 = 4.8 × 10⁻⁵ T.
  2. 2.Axial B = 9.6 × 10⁻⁵ T towards +x. Equatorial B = 4.8 × 10⁻⁵ T towards −x.
  3. 3.The axial magnitude is twice the equatorial magnitude. At 20 cm each magnitude becomes one eighth as large; neither direction reverses merely because distance increases.

Superposition and a test of the model

Fields from multiple sources add as vectors. A compass near a magnet responds to the sum of the magnet’s field and Earth’s field. If a uniform background opposes the magnet’s local field, a neutral point can occur where their magnitudes match. If they point in the same direction, equality of magnitudes does not cancel them. Test the inverse-cube model by measuring field magnitude at several large distances on one fixed axis and plotting B against 1/r³; a straight line through the origin is expected after background subtraction, within measurement uncertainty.

Do not extrapolate through the magnet

The formula grows without limit as r approaches zero, but the assumptions fail first. It describes an ideal point dipole outside its source. A real extended magnet has a finite structure and a different near field. Mathematical divergence of an approximation is not evidence of an infinite physical field.

Quick Quiz

Quiz

Quick check

On the equatorial plane of a short magnet the far B is

Equatorial B is a negative positive-coefficient multiple of the moment vector.

Quick check

At equal far distances, axial magnitude divided by equatorial magnitude is

The axial formula contains 2m while the equatorial magnitude contains m.

Quick check

At fixed moment and angular position, tripling far-field distance gives

The inverse-cube dependence gives a factor 1/3³.

Quick check

Which observation point is suitable for a point-dipole approximation?

Far-field formulas require r much greater than source dimensions.

Quick check

The units of μ₀m/r³ reduce to

μ₀ has units T m/A and moment has units A m², leaving tesla.

Practice Problems

Practice Problems
  1. A magnet of moment 0.20 A m² points north. Calculate axial and equatorial fields at 0.20 m in its far region.
  2. An axial field is 32 μT at r. At what larger distance is it 4 μT?
  3. A magnet of moment 0.40 A m² points +x. A uniform field 10 μT points +x. Locate a possible equatorial neutral point.
  4. Explain why the axial B direction on the S side is still parallel to m.
  5. Derive the far axial formula from the loop result and explain its limitation.

r³ = 0.008 m³. Equatorial magnitude = 10⁻⁷ × 0.20/0.008 = 2.5 × 10⁻⁶ T, directed south. Axial magnitude is twice this, 5.0 × 10⁻⁶ T, directed north on either axial side.

Key Takeaways

Key Takeaways

• A dipole approximation requires distance much larger than source size. • Axial B is parallel to m on both sides; equatorial B is opposite to m. • At equal far distance the axial magnitude is twice the equatorial magnitude. • Far dipole fields vary as r⁻³ at fixed moment and angular position. • Electric and magnetic dipole analogies share mathematical shapes but have different sources and units. • Fields superpose as vectors, including any background field.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…