Skip to lesson content

Lesson 3 of 9

Electromagnetic Induction · Lesson 3 of 9

Lenz’s Law and Conservation of Energy

“Determine induction directions by tracking flux changes and checking energy transfer.”

Learning Objectives

• Apply a consistent four-step method for induced-current direction. • Distinguish opposition to flux change from opposition to field. • Explain the energy source for induction. • Analyse changing currents, changing area and zero-flux cases.

What does the minus sign mean physically?

Suppose a loop is in a magnetic field directed into the page. If that field grows, the induced current produces a field out of the page inside the loop. If the into-page field weakens, the induced current instead produces a field into the page. In the second case the induced field points in the same direction as the applied field. Lenz’s law therefore opposes the change in external linked flux, rather than always opposing the field itself.

A direction statement must specify the observer. Counterclockwise as viewed from the front is clockwise as viewed from behind. To avoid ambiguity in planar drawings, state into or out of the page and use the view shown. The right-hand grip rule connects a circular current to its field through the loop: counterclockwise gives an out-of-page field; clockwise gives an into-page field. This describes the field through the interior, not the return field outside the loop.

A four-step direction method

StepAction
1Identify the external field component through the loop.
2Decide whether the corresponding flux increases, decreases or stays constant.
3Choose an induced field that opposes that change.
4Use the right-hand grip rule to find current in the stated view.
External B points into the page in both casesB increasingB decreasing•×Induced B out; current CCWInduced B in; current CW• = out of page × = into page
Oppose an increase or support a decrease— Viewed from the page front. Tangential arrows show current at the top of each loop. The centre symbols represent induced field; the external field is specified in the heading.
Approaching and receding north pole

Problem
A magnet’s north pole faces a loop. Find loop current as viewed from the magnet side during approach and withdrawal.

  1. 1.The external field from the facing north pole points away from the observer through the loop. Approach increases this away-directed flux, so the loop produces a field toward the observer: counterclockwise current. Its near face acts as a north pole.
  2. 2.Withdrawal decreases the away-directed flux. The loop supports that flux with an away-directed field: clockwise current. Its near face acts as a south pole.
  3. 3.The magnet is repelled on approach and attracted on withdrawal; both interactions resist the imposed motion in this simple passive setup.

Why electrical output requires mechanical work

Push a magnet into a closed resistive coil at steady speed. The induced current creates an opposing magnetic interaction, so an external force must do work. That input energy is transferred to electrical energy and ultimately Joule heating; during transients some is also stored in magnetic fields. If the magnet is allowed to slow down, its kinetic energy supplies the output instead. Induction does not extract unlimited energy from a static permanent magnet.

If the induced current reinforced the original flux increase in this passive example, the magnet could accelerate while also heating the resistor, without an adequate energy supply. The actual Lenz direction gives the required opposing interaction. Conservation of energy is a useful consistency check, but flux geometry remains essential: it is not safe to assign every possible force in an externally powered multi-coil system by saying it must always oppose motion.

Change the area rather than the field

A wire loop changes shape

Problem
An irregular plane loop of fixed wire length expands into a circle in an into-page uniform field. Later, a circular loop is squeezed into a narrow shape in an out-of-page field. Find current directions in the page view.

  1. 1.For fixed perimeter the circle encloses maximum area. In the first process area increases, so into-page flux magnitude increases. The induced field is out of the page and current is counterclockwise.
  2. 2.In the second process area and out-of-page flux decrease. The induced field is out of the page to support the decreasing flux, so current is again counterclockwise.
  3. 3.Identical current directions can result from different external-field directions because the changes are also different. A shape change that preserves area and orientation in a uniform field need not induce a net emf.

A loop entering an into-page field gains into-page flux and has counterclockwise induced current. A loop leaving loses that flux and has clockwise induced current. The conclusion holds for triangular, circular and irregular loops; their shapes affect the rate and magnitude, but do not reverse the Lenz direction for the same sign of area change. Entirely inside a uniform field, rigid translation leaves flux unchanged.

A nearby source current changes

A detector loop coaxial with a source coil links part of the source field. When source current increases, the detector produces a field opposing the increase. When source current decreases, the detector supports the original field. If the loop is closed, this sets its current direction. At steady source current the detector emf vanishes even though mutual flux remains. Winding sense must be traced before translating this field statement into named wire terminals.

For a long straight wire, the magnetic field circles the wire. If the wire passes perpendicularly through the centre of a flat circular loop, its field lies in the loop plane. The normal flux through that plane is zero in the ideal geometry even when current changes, so the loop has no net flux-change emf. A straight wire parallel to the loop plane and offset to one side can instead give nonzero normal flux. Nearby changing current is insufficient information without geometry.

Magnetic flux is not electric flux

A rigid neutral conducting loop moving through a static electric field does not acquire a Faraday emf merely because its electric flux changes. In a purely electrostatic field, the circulation of E around a closed path is zero. Charges may redistribute and transients may occur, but electric flux change cannot be substituted for magnetic flux change in Faraday’s law. The connection between changing electric fields and magnetic circulation belongs to a different electromagnetic law.

Predict a north pole approaching a cut loop. The driving emf has the same tendency as in the closed-loop case, but the gap prevents sustained conduction around it. Thus there is little of the resistive braking associated with a closed loop. Use Lenz’s law to describe the current that would flow if the gap were closed, rather than drawing a sustained current across an insulating gap.

A capacitor interrupts the conduction path

Into-page B increasing: current tendency is CCWB −A +× × ×A is charged positive relative to B
Which capacitor plate gains positive charge?— Own schematic viewed from the page front. The arrow is the initial current tendency in the conducting wire; no conduction current crosses the capacitor dielectric.
Charge a capacitor by induction

Problem
A rectangular conducting loop has a capacitor in a gap in its top side. The left plate is B and the right plate A. An into-page field through the loop increases. Which plate initially gains positive charge?

  1. 1.Increasing into-page flux requires an out-of-page induced field, hence a counterclockwise current tendency. Along the top right-hand wire this tendency points left toward plate A.
  2. 2.Positive charge arrives on right plate A and leaves left plate B, so A becomes positive relative to B. No conduction charge crosses the dielectric.
  3. 3.During charging there can be transient current in the wire. The later charge and current require the capacitance, resistance, inductance and time history; Lenz’s law alone gives the initial charging tendency, not a complete transient solution.

Quick Quiz

Quiz

Quick check

Into-page magnetic flux is decreasing. The induced field inside a closed loop is

Explanation: The induced field supports the decreasing into-page flux.

Quick check

Viewed from the page front, counterclockwise current produces interior field

Explanation: Curl right-hand fingers with current; the thumb points toward the observer.

Quick check

A north pole approaches a loop. From the magnet side, induced current is

Explanation: The near loop face becomes north to oppose increasing flux.

Quick check

A rigid loop translates entirely in uniform steady B with fixed orientation. Net induced emf is

Explanation: Its enclosed flux remains unchanged.

Quick check

Lenz’s law states that the induced effect opposes

Explanation: A decreasing flux can be supported by an induced field in the same direction.

Practice Problems

Practice Problems
  1. An out-of-page field increases through a closed loop. State current direction and the reasoning.
  2. A south pole approaches a loop. State current as viewed from the magnet.
  3. A rectangular loop leaves an into-page field. What changes if the loop is triangular instead?
  4. A source coil field points right through a coaxial detector. Its current decreases. Find the detector field and explain its energy role.
  5. A vertical straight wire passes through the centre of a horizontal circular loop. Its current decreases. Is a loop emf inevitable?

The increasing flux is out of the page. The induced field must point into the page to oppose the increase. The right-hand grip rule gives clockwise current viewed from the page front.

Key Takeaways

Key Takeaways

• Determine the changing external flux before assigning current direction. • Induced effects oppose flux change, not necessarily the applied field. • Counterclockwise current gives out-of-page interior field in the stated view. • Mechanical work or stored energy supplies induced electrical output. • Entering and leaving a field region give opposite current directions. • Shape changes matter through area and orientation, not shape names alone. • A nearby changing current induces net emf only when the linked magnetic flux changes.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…