Dual Nature of Radiation and Matter · Lesson 5 of 7
Photon Energy, Momentum and Duality
“Connect individual photon energy and momentum with beam power, photon counting and the experimental meaning of light’s duality.”
• Calculate photon energy, momentum and arrival rate from frequency, wavelength and beam power. • Distinguish photon energy from total beam energy and intensity. • Apply conservation of energy to an X-ray short-wavelength limit. • Explain why particle-like interactions and wave-like propagation belong to one quantum description.
What is in a weak beam?
A beam of fixed colour can be dimmed enormously without changing its frequency. The photon model describes a lower mean number of photons arriving per second, rather than smaller pieces of photon energy. A detector may record isolated absorption events even though the accumulated distribution of many events can show interference. The word particle describes local energy and momentum exchanges; it does not make a photon a tiny classical marble following a known path in every experiment.
Energy and momentum are different quantities
A photon in vacuum has zero rest mass and travels at c. It still carries energy and momentum. Rest mass being zero does not imply that momentum must be zero: p = mv is the nonrelativistic momentum relation for a massive slow particle and must not be applied to a photon. For vacuum radiation the energy–momentum relationship is Eγ = pc. Combining it with the photon-energy postulate gives the photon momentum.
For a monochromatic beam, each photon has the same energy hf and momentum magnitude hf/c, regardless of intensity. Photons carry no electric charge and are not deflected by ordinary static electric or magnetic fields in vacuum. This does not mean light cannot interact with matter: an absorber receives energy and momentum. In absorption or scattering, conserve the total energy and vector momentum of the complete system; the material can recoil, heat or emit other radiation. Photon number itself need not be conserved.
Derivation: from beam power to photon rate
If N photons of energy hf arrive during an interval Δt, the delivered energy is Nhf. Average power is that energy divided by Δt. Rearranging gives the mean photon rate Ṅ. It is a rate, not a dimensionless count: multiply by an exposure time to obtain a photon number. If only part of the beam hits a target, use the intercepted optical power rather than the source’s entire output.
Problem
A monochromatic laser emits 2.00 mW at 6.00 × 10¹⁴ Hz. Find photon energy and photons emitted per second.
- 1.Energy per photon is hf = (6.62607 × 10⁻³⁴)(6.00 × 10¹⁴) = 3.976 × 10⁻¹⁹ J.
- 2.Convert 2.00 mW to 2.00 × 10⁻³ J/s. The photon rate is P/Eγ = 5.03 × 10¹⁵ s⁻¹.
- 3.Doubling output power at this frequency doubles that rate. Changing frequency at the same power changes both energy per photon and photon rate in opposite directions.
Counting emitted electrons is not counting every incident photon
Not every incident photon ejects an electron that reaches the collector: some light is reflected, absorption may not produce escape, and collection can be incomplete. Let η be the number of emitted electrons per incident photon in the simple one-photon regime. If collection is saturated, current magnitude is eηṄ. Setting η = 1 gives the elementary ideal upper estimate for one emitted electron per incident photon, not a universal experimental equality. The quantum efficiency depends on wavelength and surface.
Problem
A 9.42 mW, 632.8 nm beam is fully intercepted. Find Eγ, pγ, photon rate, and the speed of a hydrogen atom with that momentum, using mH = 1.67 × 10⁻²⁷ kg.
- 1.Eγ = hc/λ = 3.139 × 10⁻¹⁹ J, about 1.959 eV.
- 2.pγ = h/λ = 1.047 × 10⁻²⁷ kg m/s. Photon rate is P/Eγ = 3.00 × 10¹⁶ s⁻¹.
- 3.For the slow atom, p = mHv, so v = pγ/mH = 0.627 m/s. Equal momentum does not imply equal speed or energy for an atom and a photon.
- 4.The photon travels at c, whereas the atom is massive and slow; its nonrelativistic kinetic-energy formula is appropriate.
An application: the shortest wavelength of an X-ray tube
An electron accelerated from rest through an accelerating potential magnitude U gains kinetic energy eU. On striking a target it can lose different amounts of energy, producing a continuous range of photon energies. A single photon cannot receive more energy than is available from the incident electron. In the ideal maximum-transfer event, ignoring the tiny recoil correction for a heavy target, one photon receives essentially eU. This establishes a maximum frequency and a minimum wavelength. It does not say every electron creates such a photon.
Problem
Estimate the maximum frequency and minimum wavelength for electrons accelerated through 30 kV.
- 1.Available kinetic energy is eU = 30 keV = 4.807 × 10⁻¹⁵ J.
- 2.fmax = eU/h = 7.25 × 10¹⁸ Hz.
- 3.λmin = hc/(eU) = 4.13 × 10⁻¹¹ m = 0.0413 nm.
- 4.The continuous spectrum includes longer wavelengths. The limiting photon corresponds to nearly complete transfer of one electron’s kinetic energy, not the average photon energy.
How wave and photon evidence fit together
Interference and diffraction require a wave description of amplitudes. Photoelectric absorption requires discrete energy transfer, and Compton scattering gives additional evidence of photon momentum; its detailed wavelength-shift derivation is not needed here. An optical system can use both aspects: a lens gathers and focuses light through wave propagation, while retinal molecules absorb light in quantum events. Light does not arbitrarily turn into an ordinary water wave at one moment and a classical pellet at the next.
The photoelectric effect alone is especially direct evidence for quantised energy exchange with matter. A full photon description also includes momentum, quantum states and interference. Saying that the relevant experiment reveals a wave or particle aspect is more precise than claiming every classical feature of both pictures can be observed simultaneously. Conservation laws remain in force across these descriptions.
Two beams have equal power, one at frequency f and one at 2f. The second beam has twice the energy per photon but half the photon rate. Equal total energy per second is therefore compatible with different event energies and different event counts.
Quick Quiz
Quiz
For a photon in vacuum, which momentum relation applies?
A photon is massless but has momentum. The vacuum relationship Eγ = pc gives p = Eγ/c.
At fixed beam power, frequency doubles. What happens to photon rate?
Ṅ = P/(hf). With P and h fixed, doubling f doubles energy per photon and halves the rate.
Which is conserved for the complete system in photon absorption?
The photon can disappear while the material gains its energy and momentum. Photon number is not generally conserved.
Doubling X-ray accelerating voltage changes the ideal minimum wavelength how?
λmin = hc/(eU). This is an energy-conservation upper photon-energy bound.
Why can measured saturation current be less than eP/(hf)?
Reflection, absorption without escape and finite quantum efficiency reduce the number of emitted electrons per incident photon. Saturation refers to collection of those emitted.
Practice Problems
- A 500 nm beam of power 1.00 mW is fully absorbed for 2.00 s. Find photon energy, photon rate and total photon number.
- A 400 nm beam and an 800 nm beam have equal power. Compare photon energy, momentum and photon rate.
- A fully intercepted beam supplies 2.0 × 10¹⁵ photons/s, with emission quantum efficiency 0.15. Find the saturation current in the one-photon regime.
- An X-ray tube is operated at 20.0 kV. Find its ideal shortest wavelength and explain why photons of longer wavelength are also expected.
- An atom and a 600 nm photon have equal momentum. For atomic mass 2.00 × 10⁻²⁶ kg, find the atom’s speed and compare their kinetic/total energies.
Eγ = hc/λ = 3.973 × 10⁻¹⁹ J. Ṅ = 1.00 × 10⁻³/Eγ = 2.52 × 10¹⁵ s⁻¹. Over 2.00 s, N = 5.03 × 10¹⁵. The distinction between rate and number follows from multiplying by exposure time; the total delivered energy is 2.00 × 10⁻³ J.
Key Takeaways
• In vacuum a photon has Eγ = hf = hc/λ and momentum magnitude pγ = Eγ/c = h/λ. • Zero photon rest mass does not imply zero energy or momentum. • Beam power equals photon arrival rate times energy per photon. • At equal power, higher frequency means fewer, more energetic photons per second. • Quantum efficiency is needed to relate incident photons to emitted electrons. • The ideal X-ray cutoff follows from hfmax ≈ eU and λmin ≈ hc/(eU). • Wave interference and local quantum absorption are complementary aspects of light.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…