Skip to lesson content

Lesson 1 of 7

Dual Nature of Radiation and Matter · Lesson 1 of 7

Electrons, Work Function and Emission

“Explain how electron experiments reveal universal particles and why mobile electrons still need energy to leave a metal.”

Learning Objectives

• Use charge-to-mass evidence to identify electrons from different sources. • Distinguish motion inside a metal from escape through its surface. • Convert electron volts to joules using energy per charge. • Compare thermionic, field and photoelectric emission.

How can light make a metal lose charge?

A freshly cleaned zinc plate connected to an electroscope can lose negative charge when ultraviolet radiation reaches it. The escaping charge is negative: electrons leave the surface. The light supplies energy; it does not manufacture the electrons. This observation raises two separate questions. What particles are leaving, and what prevents them leaving before the light is switched on?

Recognising the same particle in different experiments

In a low-pressure discharge tube, an applied voltage produces a stream from the negative electrode, called the cathode. The stream can make glass fluoresce. Deflection by electric and magnetic fields identifies negatively charged particles rather than ordinary light. Thomson measured their charge-to-mass ratio; changing the cathode material or the residual gas did not change the characteristic ratio. Particles emitted by heated metals and illuminated metals gave the same ratio. Together these observations support electrons being common constituents of matter, rather than a special substance released by one particular metal.

The magnitude of the electron charge is e; its actual charge is −e. The measured magnitude e/mₑ is about 1.76 × 10¹¹ C/kg. A charge-to-mass ratio alone does not give either quantity separately. Millikan’s oil-drop measurements supplied an independent charge scale and showed droplets carrying integral multiples of e. Combining the two measurements gives the electron mass. Typical cathode-ray speeds are appreciable fractions of the speed of light, so detailed high-speed calculations require relativity; we use the accepted ratio here as experimental evidence, not as a nonrelativistic speed formula.

Combining two independent measurementsLaTeX
e = 1.602176634 × 10⁻¹⁹ C. The denominator is a measured charge-to-mass magnitude in C/kg, giving mₑ in kg.
From specific charge to mass

Problem
Use e = 1.60 × 10⁻¹⁹ C and e/mₑ = 1.76 × 10¹¹ C/kg to estimate mₑ.

  1. 1.The ratio is e/mₑ, so multiplying by mₑ and dividing by the ratio gives mₑ = e/(e/mₑ).
  2. 2.mₑ = (1.60 × 10⁻¹⁹)/(1.76 × 10¹¹) = 9.09 × 10⁻³¹ kg.
  3. 3.C divided by C/kg gives kg. The result is close to the accepted 9.11 × 10⁻³¹ kg; the small difference reflects rounded inputs.

Free inside does not mean free to escape

Conduction electrons can move through a metal and respond to an electric field, which explains electrical conduction. That freedom is confined by the material’s surface energy barrier. Removing an electron separates negative charge from the attractive positive ionic background and changes the energy of the system. Thermal motion or ordinary drift does not imply that every electron can leave. A surface barrier can retain electrons while allowing them to move inside, just as motion within an energy well is possible without escape from the well.

Definition
Work function

The work function φ is the minimum energy needed to remove an electron from the metal into vacuum, referenced to the highest occupied electronic states at low temperature. It is a property of the material and its surface condition, not a force or a voltage.

Electrons do not all occupy the same initial energy. Electrons starting further below the escape level need more energy, and some lose energy while travelling to the surface. The work function is the least required energy, so an energy balance using it predicts the maximum possible outgoing kinetic energy. The electronic energy distribution is governed by quantum statistics and the exclusion principle; treating it as the ordinary classical gas distribution would be misleading. We need the idea of a distribution here, without its advanced mathematical form.

Minimum escape energy at a metal surfaceEnergy required to leave the surfaceEnergyVacuum escape levelHighest occupied states (low temperature)Minimum energy φ= work functionSchematic levels: φ is an energy difference, not a distance.
The surface energy barrier— Schematic energy levels, not the path or size of an electron. The work function is an energy difference.

Why an electron volt is an energy

Electric potential difference measures energy transferred per charge. If an electron is accelerated through a potential rise of magnitude U, its potential energy falls and its kinetic energy increases by eU when losses are negligible. An electron volt is the energy gained for a 1 V accelerating difference. It is convenient because energies in this chapter are often only a few electron volts, which are very small in joules.

Energy and potential differenceLaTeX
The symbol eV denotes an energy unit. V denotes a potential-difference unit. The electron’s negative charge does not make the energy unit negative.
Converting a surface escape energy

Problem
A surface has work function 2.40 eV. Express it in joules and find the ideal minimum energy to remove 10¹² electrons from a maintained neutral surface.

  1. 1.For one electron, φ = 2.40 × 1.602 × 10⁻¹⁹ = 3.84 × 10⁻¹⁹ J.
  2. 2.For 10¹² independent removals with the same surface condition, total required energy is Nφ = 3.84 × 10⁻⁷ J.
  3. 3.This is an ideal lower bound: real energy delivery can be inefficient. A supply maintaining neutrality prevents accumulating positive charge from raising the escape requirement.

Three ways of enabling escape

MethodWhat changesPhysical explanation
Thermionic emissionTemperatureHeating populates sufficiently energetic electronic states; some electrons can cross the barrier.
Field emissionA very strong surface electric fieldThe field narrows the barrier and permits quantum tunnelling; an electron need not simply climb the unchanged barrier.
Photoelectric emissionIncident light of suitable frequencyAbsorbed radiation transfers energy to electrons; some can escape through the surface.

Field emission commonly requires fields of order 10⁸ V/m or larger, with the required value depending strongly on surface geometry and material. Sharp tips enhance the local field. This is a qualitative comparison, not a universal cutoff field. Spark initiation may involve field-assisted emission, but a complete spark also involves gas ionisation; it is not a pure field-emission experiment.

The observations before the explanation

Hertz noticed that ultraviolet illumination helped spark detection in his electromagnetic-wave experiments. Hallwachs used zinc and an electroscope to identify loss of negative charge; under suitable conditions an initially neutral plate could become positive. Lenard studied illuminated emitters in evacuated tubes and measured a light-dependent current. Zinc generally needs ultraviolet radiation, whereas some alkali-metal surfaces can emit under visible light. The surface, frequency and experimental conditions must be specified: brightness alone is not a sufficient description.

Predict and explain

Suppose an isolated metal emits electrons. Does it become negative? It becomes more positive because negative charge leaves. Continued charging can hinder further escape, so sustained-current experiments use an external circuit to replenish the emitter.

These observations establish that light can release existing electrons. They do not yet tell us the energy of the emitted electrons or how brightness affects it. Measuring both current and electron energy is the next step: counting escaping electrons and measuring their energy are different experimental tasks.

Quick Quiz

Quiz

Quick check

Why does a metal conduct while retaining its electrons?

Conduction concerns internal mobility. Leaving the material requires sufficient additional energy at the surface.

Quick check

Which quantity is measured in electron volts?

An electron volt is an energy unit. Work function is an energy, while potential difference is measured in volts.

Quick check

An isolated neutral plate loses electrons. What is its resulting charge?

The plate has lost negative charge while its positive ionic charge remains.

Quick check

What is needed in addition to e/mₑ to determine mₑ?

A ratio alone cannot fix two unknowns. With e measured independently, mₑ = e/(e/mₑ).

Quick check

Which mechanism best describes field emission?

A strong surface field narrows the barrier. Quantum tunnelling is the mechanism; heating and illumination define different emission processes.

Practice Problems

Practice Problems
  1. A work function is 3.00 eV. Convert it to joules and explain why 3.00 V is not the same quantity.
  2. A beam contains 2.0 × 10¹² electrons per second. Find the magnitude of the charge transferred each second.
  3. Explain why electron emission from an isolated plate can slow even when the energy source stays on.
  4. A particle has charge magnitude 1.60 × 10⁻¹⁹ C and measured charge-to-mass ratio 8.00 × 10¹⁰ C/kg. Find its mass. Does charge alone identify it as an electron?
  5. Two surfaces of the same metal have different emission thresholds. Give a physical reason and propose a fair comparison.

Use 1 eV = 1.602 × 10⁻¹⁹ J. Thus φ = 4.81 × 10⁻¹⁹ J. Work function measures energy; voltage measures energy per charge. A 3.00 V accelerating difference gives one electron 3.00 eV of kinetic energy in the ideal lossless case.

Key Takeaways

Key Takeaways

• Electrons from different sources share the same characteristic charge-to-mass ratio. • Conduction requires mobility inside a metal; emission requires escape through its surface. • Work function is the minimum escape energy and depends on the surface condition. • 1 eV = 1.602176634 × 10⁻¹⁹ J; volts and electron volts measure different quantities. • Heating, strong fields and suitable light enable emission through different mechanisms. • Losing electrons makes an isolated plate more positive.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…