Nuclei · Lesson 6 of 8
Fission and Nuclear Energy
“Explain neutron-induced fission through conservation and binding, estimate energy from bulk fuel, and separate available energy from useful output.”
• Balance representative neutron-induced fission channels. • Connect fission energy with an increase in total binding. • Calculate bulk reaction energy from particle count and energy per event. • Explain why a balanced fission proposal can still be endothermic.
What changes in a fission event?
Fission is a process in which a heavy nucleus divides into lighter nuclear fragments. In an important example, a uranium-235 nucleus absorbs a neutron, forming an excited compound uranium-236 system that can split. The outcome is not a fixed identical pair in every event: several fragment channels occur, with neutrons and radiation carrying energy and momentum. The products are often unstable and may undergo further decays.
| Alternative channel after neutron absorption | Nucleon balance | Charge balance |
|---|---|---|
| U-235 + n → Sb-133 + Nb-99 + 4n | 236 = 133 + 99 + 4 | 92 = 51 + 41 |
| U-235 + n → Xe-140 + Sr-94 + 2n | 236 = 140 + 94 + 2 | 92 = 54 + 38 |
A count balance is only one test. Nuclear masses determine the Q-value and energy must be distributed consistently with momentum. Many fission products are neutron rich, so subsequent beta-minus processes change their element identities toward more favourable nuclear states. Those later decays contribute to the overall energy history; their timing differs from the prompt motion of fragments and neutrons.
Why heavy nuclei can release energy by splitting
Very heavy nuclei lie below the broad iron–nickel maximum on the B/A curve. Many medium-mass fragments have higher average binding. When a specified heavy initial system transforms into such a more tightly bound final system, the total rest mass decreases and the difference becomes outgoing energy. The positive binding-energy gain does not mean an individual fragment must reach the exact maximum of the curve.
Problem
Estimate the energy change if an A = 240 nucleus at 7.6 MeV per nucleon becomes two A = 120 fragments at 8.5 MeV per nucleon.
- 1.The initial total binding is 240 × 7.6 = 1824 MeV; the final total is 2 × 120 × 8.5 = 2040 MeV.
- 2.The total gain is 216 MeV, of order 200 MeV per event. The 0.9 MeV per-nucleon increase must be multiplied by 240.
- 3.This estimate uses representative curve values. A real channel needs actual masses and all emitted particles, rather than assuming one universal fission energy.
Much of the prompt release appears as kinetic energy of fragments and neutrons, with radiation also contributing. Interactions with surrounding material convert much of that energy into heat, which can then drive a heat engine and generator. The useful electrical energy is less than the total available reaction energy. Neutrino energy from later decays and other losses cannot simply be counted as deposited heat.
Not every split releases energy
Problem
Would an isolated iron-56 nucleus at rest spontaneously split into two aluminium-28 nuclei? Use atomic masses 55.93494 u and 27.98191 u.
- 1.Charge balances as 26 = 13 + 13 and nucleon count as 56 = 28 + 28. Neutral-atom electron counts also balance, so atomic masses can be used to the stated approximation.
- 2.The mass difference is 55.93494 − 2(27.98191) = −0.02888 u. Thus Q = −0.02888 × 931.5 = −26.90 MeV.
- 3.The proposed split is endothermic. It cannot occur spontaneously from the isolated ground-state nucleus at rest; an induced process would require sufficient energy input. A balanced equation alone did not establish accessibility.
From one event to a macroscopic energy
Problem
A pure 1.00 kg plutonium-239 sample undergoes complete fission, releasing a given average 180 MeV per nucleus. Estimate the total energy.
- 1.Using a molar mass near 239 g/mol, the number of nuclei is (1000/239)(6.022 × 10²³) ≈ 2.52 × 10²⁴.
- 2.Multiplying by 180 MeV gives E ≈ 4.54 × 10²⁶ MeV. Converting gives about 7.27 × 10¹³ J.
- 3.These are ideal complete-fission energy totals under the supplied average. They are not automatically useful electrical output, and they are much less than the rest-energy equivalent of the whole kilogram.
A chain reaction connects separate events
Fission can emit neutrons that induce further fission events, linking the reactions into a chain. Some neutrons escape or are absorbed without causing fission. A steady power-producing system must manage the neutron population and remove the heat produced. Absorbing materials can regulate the neutron balance. The essential concept is a controlled rate of repeated energy-releasing events, not a change to the Q-value of one event.
The energy scale explains why a modest fuel mass can release substantial energy. Typical chemical energy releases per event are eV-scale, whereas an individual heavy-nucleus fission can release around hundreds of MeV. The energy-per-kilogram comparison also depends on how many events the kilogram contains, which reaction occurs and how completely its energy is recovered. A rough factor of a million is a scale comparison, not an exact universal conversion for every fuel.
If only half the nuclei fission and 30% of the released energy becomes useful electrical energy, the useful output is 0.5 × 0.30 = 0.15 of the ideal complete-fission reaction energy. This changes the output calculation, not the energy conservation of an individual event.
Quick Quiz
Quiz
Why must a fission equation include emitted neutrons?
Neutrons have zero charge but nonzero nucleon count, mass and momentum, so omitting them can invalidate the bookkeeping.
A uranium-235 nucleus absorbs one neutron. What is the compound system’s A?
The absorbed neutron adds one nucleon and no electric charge, making uranium-236 in an excited compound state.
Why does the proposed Fe-56 → 2Al-28 split not occur spontaneously from the isolated ground state?
The count balance works, but final rest mass is larger. About 26.9 MeV of extra energy is needed even before detailed collision-threshold considerations.
What is the ideal energy for 10¹² events at 200 MeV each?
Multiply the number of events by energy per event: 10¹² × 200 = 2 × 10¹⁴ MeV.
What changes if electrical conversion efficiency is below 100%?
Efficiency governs how released energy is transferred to useful output, not the underlying rest-mass energy difference.
Practice Problems
- A neutron-induced uranium-235 channel produces Xe-140, Sr-94 and neutrons. Find the number of emitted neutrons and verify charge balance with ZXe = 54 and ZSr = 38.
- Use atomic masses 55.93494 u and 27.98191 u to evaluate Fe-56 → 2Al-28. State the correct sign and what it implies.
- Find the ideal total energy in MeV and joules if every nucleus in 1.00 kg of pure plutonium-239 fissions at 180 MeV per event. Use N_A = 6.022 × 10²³ mol⁻¹ and 1 MeV = 1.602 × 10⁻¹³ J.
- A collection undergoes 10²⁰ fissions at a given 200 MeV per event, with 30% of that energy converted to electricity. Estimate useful electrical energy.
- Explain why emitted neutrons can sustain a chain yet do not guarantee that every emitted neutron creates another fission.
The initial nucleon count is 236. The fragments contain 140 + 94 = 234 nucleons, leaving two neutrons. The charge balance is 92 = 54 + 38. The reaction is U-235 + n → Xe-140 + Sr-94 + 2n; an energy–momentum balance is still required for its physical outcome.
Key Takeaways
• A heavy nucleus can split after absorbing a neutron into an excited compound system. • Different fission channels can satisfy the same total charge and nucleon constraints. • Many heavy-nucleus channels release energy because the final total binding increases. • A balanced equation does not guarantee positive Q; the specified iron split is endothermic. • Bulk energy equals the number of reacting nuclei times energy per event. • Reaction energy first appears in motion and radiation and can later become heat. • Useful electrical output depends on reaction completion and conversion efficiency. • A chain reaction depends on how emitted neutrons connect one event to later events.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…