Nuclei · Lesson 4 of 8
Binding Energy, Stability and Reaction Energy
“Interpret the binding-energy curve, connect energy release with changes in total binding, and calculate reaction Q-values with conservation checks.”
• Read the major trends and limitations of a B/A versus A graph. • Distinguish total binding from average binding when comparing reactions. • Calculate and interpret positive and negative Q-values. • Apply charge, nucleon-number and energy conservation without overgeneralising separate proton/neutron conservation.
The binding curve organises many different nuclei
Plotting binding energy per nucleon against mass number reveals a broad pattern: low values for the lightest nuclei, a rapid rise with local variations, a broad maximum near the iron–nickel region around A ≈ 60, and a gradual decline toward very heavy nuclei. Typical medium-mass values are about 8 MeV per nucleon. The peak is about 8.8 MeV per nucleon, not a perfectly sharp universal point at one mass number.
The steep light-nucleus rise and broad middle region are consistent with short-range binding and saturation. The larger surface fraction of light nuclei reduces the average number of strongly bound neighbours. For very heavy nuclei, growing long-range proton repulsion reduces binding per nucleon. Particularly well-bound light nuclides such as helium-4 and oxygen-16 show that the curve has structure; shell and pairing effects require a quantum nuclear description beyond a smooth-drop picture.
A high B/A indicates strong average binding relative to free nucleons, but does not prove a nuclide is stable against every possible decay. Stability depends on whether a complete allowed final system has lower rest energy. Neutron–proton balance also matters. Stable light nuclei often have N roughly equal to Z, whereas heavier stable nuclei generally need more neutrons than protons. A fixed ratio is a useful trend, not a sufficient test for every isotope.
Energy release comes from complete initial and final systems
For a specified reaction, collect every incoming particle and every outgoing particle, including emitted photons and leptons when present. Compare their total rest masses using one consistent convention. Define Q as the rest-energy decrease available for kinetic energy and radiation. A positive Q means an exothermic channel; a negative Q means the process requires energy input. This is an energy balance, not a statement that a reaction with positive Q will happen rapidly.
Energy conservation can be written initial rest energy plus initial kinetic energy equals final rest energy plus final kinetic energy plus any emitted radiation energy. Rearranging gives Q = K_final − K_initial + E_radiation when photons are counted separately. If all final outgoing energies, including photons, are included in the final non-rest energy term, Q is simply the gain of that total term. An endothermic collision may require more than |Q| in the laboratory because some kinetic energy must preserve centre-of-mass motion.
Binding energies explain the sign of Q
For reactions that keep total proton and neutron counts separately unchanged, write each nuclear mass as its free-nucleon mass sum minus B/c². When all initial masses are added and all final masses subtracted, the free-proton and free-neutron sums cancel. What remains is final total binding minus initial total binding. If weak transformations change proton and neutron counts, their different masses and any leptons must instead be included explicitly.
Problem
A hypothetical A = 240 nucleus with B/A = 7.6 MeV splits into two A = 120 fragments each with B/A = 8.5 MeV. Estimate Q.
- 1.Initial total binding is 240 × 7.6 = 1824 MeV. Final total binding is 2 × 120 × 8.5 = 2040 MeV.
- 2.The gain of binding is Q = 2040 − 1824 = 216 MeV. Multiplying the 0.9 MeV per-nucleon increase by all 240 nucleons gives the same result.
- 3.This is a broad illustrative estimate, not a precision calculation of a specified isotope channel. A typical heavy-nucleus fission release is of order 200 MeV.
Problem
Use atomic masses to calculate Q for hydrogen-1 + hydrogen-3 → two hydrogen-2 atoms. Take masses 1.007825 u, 3.016049 u and 2.014102 u.
- 1.The electron counts cancel: the initial pair has two neutral-atom electrons and the final pair also has two. The total mass difference is 1.007825 + 3.016049 − 2(2.014102) = −0.004330 u.
- 2.Q = −0.004330 × 931.5 = −4.033 MeV. The channel is endothermic and cannot occur from resting reactants without additional energy.
- 3.The magnitude is not automatically the exact projectile laboratory threshold. Momentum and collision geometry must also be respected.
Problem
Calculate Q for two carbon-12 nuclei forming neon-20 and helium-4, using atomic masses 12.000000 u, 19.992439 u and 4.002603 u.
- 1.Charge balances as 6 + 6 = 10 + 2, and nucleon number as 12 + 12 = 20 + 4. Neutral atomic electron counts therefore cancel.
- 2.The mass difference is 24.000000 − 19.992439 − 4.002603 = 0.004958 u. Thus Q = 0.004958 × 931.5 = 4.618 MeV ≈ 4.62 MeV.
- 3.The positive sign means energy is available after the reaction. The positively charged reactants still face a Coulomb barrier, so positive Q does not eliminate the need for favourable collision conditions.
Which counts are conserved?
Ordinary low-energy nuclear equations conserve total electric charge and total nucleon number, together with energy and momentum. In many strong nuclear reactions, proton and neutron numbers also happen to balance separately. They do not do so in beta processes: a neutron can become a proton while an electron and antineutrino carry the required charge and other quantum-number balance. A nuclear equation may change chemical elements; it is not balanced by demanding the same number of atoms of each element.
Chemical reactions also change the total rest mass when energy leaves or enters the chemical system. Their binding changes are usually on an eV-per-event scale, compared with MeV-scale changes in many nuclear events. The much smaller chemical mass change is hard to detect in ordinary weighing. The same energy accounting applies in principle, so “mass–energy applies only to nuclear reactions” is incorrect.
A large positive Q does not specify a reaction rate, a barrier height or a conversion efficiency. Those are separate questions. A plausible-looking balanced equation also does not guarantee an energetically accessible or dynamically likely process.
Quick Quiz
Quiz
Where is the broad maximum of the nuclear B/A curve?
Representative B/A values peak near A ≈ 60 at about 8.8 MeV per nucleon.
What indicates an exothermic nuclear channel?
A positive initial-minus-final rest-mass difference gives positive Q, available to motion and radiation.
In a reaction conserving proton and neutron counts separately, what gives Q?
The free-nucleon rest masses cancel, leaving the gain of total binding, not merely a difference of averages.
Which statement about Q < 0 is correct?
A negative Q is an energy cost. Laboratory threshold kinematics can require additional projectile energy.
Are proton and neutron numbers separately conserved in every nuclear transformation?
Charge, energy and the appropriate total nucleon bookkeeping still balance, while a neutron or proton changes identity in weak processes.
Practice Problems
- Use m_H = 1.007825 u and mₙ = 1.008665 u to calculate total B and B/A for iron-56 with atomic mass 55.934939 u, and bismuth-209 with atomic mass 208.980388 u.
- A hypothetical reaction changes total binding from 250 MeV to 274 MeV without changing total proton or neutron numbers. Find Q and explain the final rest-mass change.
- Recalculate Q for hydrogen-1 + hydrogen-3 → two hydrogen-2 nuclei using atomic masses 1.007825 u, 3.016049 u and 2.014102 u. Why are atomic masses acceptable here?
- Why can joining two light nuclei and splitting a very heavy nucleus both release energy, while splitting iron-56 into two aluminium-28 fragments costs energy?
- A chemical process releases 5.0 eV per event. Estimate its rest-mass decrease in kg and explain why this does not violate mass–energy equivalence.
For iron, Z = 26 and N = 30, so Δm = 26m_H + 30mₙ − 55.934939 = 0.528461 u. B = 492.26 MeV and B/A = 8.790 MeV per nucleon. For bismuth, Z = 83 and N = 126, giving Δm = 1.760877 u, B = 1640.26 MeV and B/A = 7.848 MeV per nucleon. Bismuth has more total binding but less binding per nucleon.
Key Takeaways
• The broad B/A maximum lies near the iron–nickel region. • Binding per nucleon is an average and is not a complete decay-stability test. • A nuclear reaction’s Q-value compares complete initial and final rest masses. • Positive Q releases energy; negative Q requires input. • When proton and neutron species totals balance, Q equals the gain of total binding. • Differences of B/A must be weighted by the numbers of nucleons involved. • Charge and nucleon number balance, but proton and neutron numbers need not be separately fixed in beta processes. • A reaction barrier and reaction rate are different from Q. • Chemical binding changes also contribute to system rest mass.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…