Nuclei · Lesson 8 of 8
Chapter Summary and Practice
“Connect nuclear composition, size, forces, binding, decay and reaction energy through a conditioned reference and integrated problems.”
• Choose consistent particle counts, mass conventions and energy units. • Connect radius scaling, nuclear-force range and binding trends. • Distinguish complete-system Q, reaction barriers, rates and useful output. • Solve integrated nuclear-energy problems with explicit physical checks.
From nuclear contents to nuclear change
The chapter follows a connected chain. Proton and neutron counts identify a nuclide. Scattering constrains its size, and the approximate R ∝ A¹ᐟ³ law makes nuclear volume proportional to nucleon count. Short-range attraction with saturation explains similar binding environments for many interior nucleons. Rest-energy accounting explains why a bound nucleus has smaller mass than its separated nucleons. Finally, the binding curve organises broad tendencies, while a complete Q-value determines the energy balance of a specified channel.
Radioactivity, fission and fusion are different processes, but all require consistent conservation. Positive Q says that energy is available after a successful event. It does not specify its rate or eliminate a barrier. Activity describes decays per second for a sample, whereas useful power also depends on deposited energy per event and conversion conditions. These distinctions connect the nuclear model with measurements.
| Question | Relevant idea | Frequent mistake |
|---|---|---|
| Which nuclide? | Z identifies the element; A = Z + N | Treating isotope mass as exactly A u |
| How large/dense? | R = R₀A¹ᐟ³; mass and volume scale with A | Using mass ratio as radius ratio |
| How bound? | Short-range nuclear attraction and saturation | Using electric repulsion as the binding force |
| How much separation energy? | B = Δmc² with consistent masses | Mixing atomic and nuclear masses |
| Does a reaction release energy? | Complete initial-minus-final rest mass | Comparing unweighted B/A values alone |
| What useful output? | Event rate, deposited energy, efficiency | Assuming positive Q guarantees high power |
A reference with symbols, units and conditions
| Relationship | Symbols/physical meaning | Units | Conditions and limits |
|---|---|---|---|
| A = Z + N | Nucleon, proton and neutron counts | Dimensionless | Electron count depends separately on ionic charge |
| 1 u ≈ 1.66054 × 10⁻²⁷ kg | Carbon-12-based atomic mass unit | Mass | Mass number A is a count, not a mass unit |
| Mean mass = Σfᵢmᵢ | fᵢ are number fractions summing to 1 | u or kg | Specified isotope composition |
| R = R₀A¹ᐟ³ | R₀ ≈ 1.2 fm | m or fm | Approximate characteristic size |
| ρ ≈ 3m_N/(4πR₀³) | Representative nucleon mass m_N | kg/m³ | Spherical model and mass ≈ Am_N |
| Fᵣ = −dV/dr | Outward-positive radial force | N for J/m | Schematic central-potential interpretation |
| E_rest = mc² | System rest energy | J | Moving systems also have kinetic energy |
| Δm = Zmₚ + Nmₙ − M_nucleus | Nuclear-mass bookkeeping | u or kg | Bare proton masses and a bare nuclear mass |
| Δm ≈ Zm_H + Nmₙ − M_atom | Atomic-mass bookkeeping | u or kg | Electronic binding corrections neglected |
| B = Δmc²; B/A | Total/mean complete-unbinding energy | MeV; MeV per nucleon | Mean is not a specified last-nucleon separation energy |
| 1 u c² ≈ 931.5 MeV | Mass difference to energy | Energy | 1 u itself is 931.5 MeV/c² as a mass unit |
| Q = (Σm_initial − Σm_final)c² | Complete-system rest-energy decrease | J or MeV | Include emitted particles and consistent electrons |
| Q = B_final,total − B_initial,total | Gain of total binding | MeV | Simple cancellation assumes unchanged total proton/neutron species counts |
| 𝒩 = 𝒩₀e^(−λt) | Expected surviving parents | Count; λ in s⁻¹ | Single nuclide, constant rate, no other parent gain/loss |
| T₁/₂ = ln 2/λ; τ = 1/λ | Half-life and mean life | s | Statistical times, not individual schedules |
| 𝒜 = λ𝒩 | Expected sample decay rate | Bq = s⁻¹ | Deposited power also needs energy per event |
| U_C ≈ kZ₁Z₂e²/(R₁ + R₂) | Classical contact estimate | MeV with ke² = 1.440 MeV fm | Not a hard quantum threshold |
| E_total = events × Q; P = E/t | Energy and mean power | J, W, s | Include reactants per event, completion and efficiency |
Signs and averages require physical interpretation
Positive binding energy B is energy needed for complete separation, while the bound-system rest energy is lower than the free-nucleon sum. Positive Q is available energy because a complete reaction’s final rest mass is smaller. Neither implies negative rest mass. Similarly, a negative potential can occur where a force is repulsive: force follows the slope rather than the potential zero. State the system and reference before interpreting a sign.
Averages require weights. If two fragments have different A and B/A, multiply each average by its own A before adding. Their unweighted arithmetic mean generally gives the wrong total. Isotope abundances likewise weight a sample mean. In bulk reaction energy, distinguish nuclei from events: each deuterium–deuterium event consumes two nuclei. These are the same discipline of counting the actual physical objects before calculating.
Combining binding and bulk-particle counting
Problem
Estimate the energy needed to separate all nucleons in 3.0 g of pure copper-63. Use atomic mass 62.92960 u, m_H = 1.007825 u, mₙ = 1.008665 u and N_A = 6.022 × 10²³ mol⁻¹.
- 1.Copper-63 has 29 protons and 34 neutrons. Its mass defect is 29(1.007825) + 34(1.008665) − 62.92960 = 0.591935 u.
- 2.Binding per nucleus is 0.591935 × 931.5 = 551.39 MeV. The sample contains (3.0/62.92960)N_A ≈ 2.87 × 10²² nuclei.
- 3.Multiply to obtain about 1.58 × 10²⁵ MeV, or 2.54 × 10¹² J, required for complete separation.
- 4.This is supplied nuclear unbinding energy. It is not released by heating or chemically dissolving a coin. Pure isotope composition and negligible electronic binding corrections are explicit assumptions.
Models give different kinds of answers
The radius law and central potential are useful approximations, not an exact sharp surface and a universal scalar force. The B/A curve summarises energetics but does not specify each decay lifetime. A beta transformation can change proton and neutron numbers individually, with emitted particles preserving charge. A balanced reaction can still require energy input. Keep these qualifications attached to the calculation rather than treating them as exceptions to conservation.
Fusion accounting must include electrons, positrons and neutrinos consistently. The proton–proton cycle’s roughly 26.7 MeV total includes escaping neutrino energy, so it is not all deposited heat. Power additionally needs events per second. Fuel inventory, possible branches and conversion efficiency are separate inputs. The following problems combine principles already taught rather than introducing a new physical law.
Identify initial/final systems → count particles → choose the mass convention → keep units compatible → calculate total energy change → check sign and magnitude → add rate, barrier or efficiency information where needed.
Quick Quiz
Quiz
Which pairing is consistent for introductory binding calculations?
Hydrogen-atom masses approximately cancel the atomic electron rest masses. Small electronic binding corrections are neglected.
What is nearly unchanged when A increases eightfold in the simple radius model?
Both mass and volume grow about eightfold, leaving their ratio nearly unchanged.
When fragment B/A values differ, what must be added?
Total binding is additive; averages for unequal nucleon counts need their proper weights.
What additional quantity converts activity into deposited power?
Decays per second multiplied by deposited joules per decay gives joules per second.
Which statement separates energy balance from reaction probability?
Q compares complete rest energies. Barriers and interaction probabilities address different questions.
Practice Problems
- A neutral nuclide has A = 40, Z = 20 and loses two atomic electrons. Give its proton, neutron and electron counts and distinguish ionisation from a nuclear change.
- Compare a nuclear radius of 3.0 fm with an atomic radius of 1.0 × 10⁻¹⁰ m. Find the radius and approximate spherical-volume ratios and explain the density implication.
- For 3.0 g of pure copper-63, use B = 551.39 MeV per nucleus and molar mass 62.92960 g/mol to estimate complete separation energy. State whether it is supplied or released.
- X has A = 60, B/A = 8.7 MeV per nucleon; Y has A = 200, B/A = 7.9 MeV per nucleon. Compare total and average binding. Can either comparison alone determine a decay lifetime?
- Calculate Q for helium-4 + deuterium → lithium-6 + γ using atomic masses 4.002603 u, 2.014102 u and 6.015123 u. Why is positive Q not sufficient to predict easy capture?
- The specified Fe-56 split has Q = −26.90 MeV. Is 20 MeV of total initial kinetic energy sufficient? Does a 30 MeV laboratory projectile automatically prove accessibility?
- A complete-fission fuel inventory has ideal reaction energy 7.27 × 10¹³ J. If 40% reacts and 30% of the release becomes electricity, how long could the output supply 100 MW?
- A collection contains 3.0 × 10²⁰ deuterons, all reacting through the 3.27 MeV branch. If 15% of the release supplies a 200 W load, estimate the duration.
- For two singly charged nuclei of assumed radii 2.0 fm each, estimate contact Coulomb energy. Then double one charge at fixed radii. Why does the comparison alone not determine a reaction rate?
- A sample begins with 8.0 × 10⁷ parents and half-life 15 min. Find remaining parents and activity after 45 min, and compare its mean life with the half-life.
- A parent with A = 210, Z = 84 undergoes alpha decay, beta-minus decay and gamma emission in sequence. Track A and Z, and explain the beta electron’s origin.
- A hypothetical A = 240 parent at B/A = 7.6 MeV splits into A = 100 and 140 fragments at B/A = 8.5 and 8.3 MeV. Assume proton/neutron species totals balance. Find Q and compare with an unweighted-average method.
- A potential is negative at two separations but has negative slope at the first and positive slope at the second. Find the force directions and connect the result with a repulsive core.
- The displayed proton–proton cycle releases about 26.7 MeV per helium-4 formed. Why is multiplying by a star’s total hydrogen count not a heating-rate calculation?
It has 20 protons, 20 neutrons and 18 electrons after ionisation, giving net charge +2e. The nucleus remains the same nuclide. Removing electrons changes electronic binding and atomic/ionic mass slightly; it does not remove two nucleons or replace the nuclear binding calculation.
Key Takeaways
• Nuclide identity comes from integer counts, not an elemental mean mass. • Radius scaling and short-range saturation connect nuclear size, density and binding. • Binding lowers system rest energy without removing counted nucleons. • Small mass differences require consistent atomic or nuclear conventions. • Q depends on complete systems and appropriately weighted total binding. • Half-life, activity and deposited power describe different quantities. • Barriers and quantum probabilities remain relevant when Q is positive. • Useful output requires event counts, completion and efficiency assumptions. • Approximate models need their conditions and limits attached to their equations.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…
Previous · Lesson 7
Fusion and Stellar Energy
Next
End of chapter