Skip to lesson content

Lesson 3 of 10

Moving Charges and Magnetism · Lesson 3 of 10

Magnetic Force on Current-Carrying Wires

“Derive the force on a wire from charge-carrier motion and apply it to force balance and shaped conductors.”

Learning Objectives

• Derive the magnetic force on a straight current-carrying conductor. • Use conventional current consistently for electron conduction. • Calculate wire forces and equilibrium conditions. • Distinguish local force from net force for curved wires and closed loops.

From microscopic motion to a visible force

A metal wire is electrically nearly neutral, yet it can move when a current passes through it in an external magnetic field. Neutrality does not cancel a magnetic effect that depends on moving charge. Electrons drift through the lattice, and their magnetic forces lead, through interactions and internal stresses, to a force on the conductor. The ordinary random thermal motions have no net directional drift; it is the current-related average motion that matters for the wire-force calculation.

Take a uniform straight segment of length l, cross-sectional area A_c and mobile-carrier number density n. It contains nA_c l carriers. If each has signed charge q and mean drift velocity v_d, their total magnetic force is (nA_c l)q(v_d × B). This is a macroscopic average description, assuming a uniform external field across the segment and a steady current. It does not require every electron to have the same instantaneous velocity.

Derive the straight-wire forceLaTeX
j is vector current density in A m⁻²; I is current magnitude in A; l is a vector of length l directed along conventional current. A_c denotes cross-sectional area, not coil area.

For electrons, q is negative and the drift is opposite conventional current. These two reversals make nqv_d point along conventional current. Once I and the current-directed length vector are used, do not insert an extra electron minus sign. Current I is a scalar flow rate through a chosen section; the direction in this equation is carried by l.

External field and geometric angle

Magnitude and force per unit lengthLaTeX
θ is the angle between conventional current and the external B. The equation applies to a straight segment in a uniform field. F/l is in N m⁻¹.

The B here is the field produced by other sources, evaluated at the segment. Substituting the segment’s own singular ideal-wire field would confuse self-interaction with an external force. If the magnetic field changes significantly along the wire, calculate small-segment forces and add them instead. The force vanishes for a straight segment parallel to B even though its current and the field are both nonzero.

I to rightF = IlBmgB into page; horizontal wire
Magnetic support of a wire— Schematic: rightward conventional current and inward B produce an upward force. The downward force shown is gravity.
Suspend a straight wire

Problem
A 0.200 kg wire of length 1.50 m carries 2.00 A. What perpendicular horizontal field balances gravity? Use g = 9.8 m s⁻².

  1. 1.For vertical equilibrium, magnetic force must be upward and equal mg. With the current horizontal and B perpendicular to it, IlB = mg.
  2. 2.B = mg/(Il) = (0.200 × 9.8)/(2.00 × 1.50) = 0.653 T. Rightward current needs an inward field in the illustrated view.
  3. 3.This gives force balance, not a proof of stable levitation against every possible displacement or rotation. Supports and field geometry determine stability.
A wire in the horizontal terrestrial field

Problem
A wire carries 1.0 A westward. The horizontal magnetic field is 3.0 × 10⁻⁵ T northward. Find force per unit length from this component.

  1. 1.Choose east = +x, north = +y and up = +z. Current is −x and B is +y, so force is −z: downward.
  2. 2.Magnitude F/l = IB = 3.0 × 10⁻⁵ N m⁻¹. A northward current would instead be parallel to this horizontal field and experience zero force from that component.
  3. 3.The full terrestrial field may also have a vertical component. The stated answer isolates the specified horizontal component; it does not discard unspecified forces without saying so.

A curved wire is a sum of segments

For a small current-directed displacement dl, the local force is I(dl × B). Add these as vectors, because the directions of different pieces can differ. For a uniform B and constant I, the field can be taken outside the integral. The integral of dl is simply the displacement from the entry endpoint to the exit endpoint, along conventional current.

General wire and uniform-field special caseLaTeX
The second result is the net force on the chosen wire portion in uniform B, not its local stress. The endpoints follow the conventional-current direction.

For a closed loop r₂ = r₁, so net force is zero in a uniform field. Nevertheless, different sides can have equal and opposite forces at different positions. They can produce a torque or deform a flexible loop. Zero net force means no resultant translational force; it does not mean no local magnetic forces.

Same endpoints, different shapes

Problem
Two current-carrying wire paths join endpoints separated by 0.20 m eastward in uniform B = 0.50 T upward. Each carries 3.0 A from west to east. Compare net forces.

  1. 1.For either path, Δr = 0.20 x m. Thus Δr × B = (0.20 x) × (0.50 z) = −0.10 y T m.
  2. 2.Net force is −0.30 y N, southward, for both paths. The length of the curved path does not replace the endpoint separation in the net-force result.
  3. 3.Local forces and stresses can differ greatly between the two paths. If B is not uniform, the endpoint shortcut no longer works.

Mechanical energy and the electrical source

A wire may acquire mechanical energy even though the magnetic force does no work on an individual charge at its actual velocity. A moving conductor contains coupled charge and lattice motion, internal electric fields and a power supply that may maintain the current. Mechanical power and electrical energy flow must be accounted for together. The simple point-particle statement forbids attributing an increase in that particle’s kinetic energy directly to q(v × B); it does not forbid electrical-to-mechanical energy conversion in a driven circuit.

Quick Quiz

Quiz

Quick check

In the straight-wire force law, the length vector points

Explanation: The direction is assigned to l, while I is scalar.

Quick check

A wire carries current parallel to a uniform external B. Its force is

Explanation: sin 0° = 0.

Quick check

A closed current loop in uniform B has what net magnetic force?

Explanation: The vector integral of dl around the closed loop is zero in uniform B.

Quick check

For fixed I, l and B, force is greatest when the angle between current and B is

Explanation: The cross-product magnitude is greatest at sin θ = 1.

Quick check

Why is no extra negative sign used for electrons in F = I l × B?

Explanation: q and electron drift both reverse relative to positive carriers, making j point along conventional current.

Practice Problems

Practice Problems
  1. Find force per unit length for I = 8.0 A and B = 0.15 T at 30° to the wire.
  2. A 3.0 cm wire carries 10 A perpendicular to a 0.27 T field inside a solenoid. Find force.
  3. A 0.10 kg horizontal wire, 0.50 m long, lies in a perpendicular 0.20 T field. What current magnitude supports its weight?
  4. A bent wire joins points 0.12 m apart eastward and carries 2.0 A between them through uniform upward B = 0.40 T. Find net force.
  5. A rectangular current loop has zero net force in uniform B. Explain why it may still rotate.

F/l = IB sin θ = 8.0 × 0.15 × 0.5 = 0.60 N m⁻¹. Determine the perpendicular direction separately using current × field.

Key Takeaways

Key Takeaways

• The wire force follows by summing magnetic forces on drifting carriers. • Use conventional current in F = I l × B. • The field in the force law is the external field. • A straight segment has force magnitude IlB sin θ. • For a shaped wire, integrate local vector forces. • In uniform B, net wire force depends on endpoint displacement. • A closed loop can have zero net force and nonzero torque.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…