Moving Charges and Magnetism · Lesson 8 of 10
Current Loops as Magnetic Dipoles
“Derive loop torque, explain stable alignment and connect a loop’s magnetic moment with its distant field.”
• Derive the torque on a rectangular current loop and define magnetic moment. • Identify the correct angle between the area normal and external field. • Distinguish stable and unstable zero-torque orientations. • Use dipole fields and energy to analyse loop behaviour without confusing local and distant fields.
Equal forces can still rotate a loop
A current loop in a uniform magnetic field has zero resultant force, but this does not imply zero torque. Consider a rectangle with side lengths a and b, carrying current I. Begin with B in the plane of the rectangle and parallel to the sides of length a. Those sides have zero magnetic force. Each side of length b is perpendicular to B and experiences force IbB. The two forces point in opposite directions, normal to the loop plane, on lines separated by a. They form a couple.
Each force has lever arm a/2 about a central axis. Their torques have the same rotational sense, so the total magnitude is (IbB)(a/2) + (IbB)(a/2) = IabB = IAB. Here A = ab is the loop area, not the wire’s cross-sectional area. A couple can rotate an object without giving its centre of mass a resultant acceleration.
Introduce the area normal
Define the vector area A to be perpendicular to the loop plane, with magnitude equal to enclosed area. Curl right-hand fingers along conventional current; the thumb gives the positive normal. Let θ be the angle between this normal and external B. When B lies in the loop plane, θ = 90° and torque is maximum. When B is normal to the loop, θ is 0° or 180° and torque is zero. The angle to the plane is complementary and cannot be substituted without changing sine to cosine.
Problem
A square coil has side 10 cm, N = 20 and I = 12 A. Its normal is 30° to external B = 0.80 T. Find torque.
- 1.Area A = (0.10)² = 0.010 m², so m = NIA = 20 × 12 × 0.010 = 2.4 A m².
- 2.τ = mB sin 30° = 2.4 × 0.80 × 0.5 = 0.96 N m.
- 3.The angle was specified to the normal. If it were 30° to the plane, the torque would instead be mB cos 30°, a different value.
Zero torque: two different equilibria
When m is parallel to B, a small angular displacement produces a torque that tends to restore alignment: this is stable equilibrium. When m is antiparallel, torque is also exactly zero, but a small displacement produces a torque that carries the dipole farther from the opposite alignment: this is unstable equilibrium. A freely moving ideal dipole does not settle without damping; after release from a displaced orientation it can oscillate about stable alignment.
A coil initially exactly at rest with m parallel to B cannot spontaneously rotate through 90° under that field alone. It starts at zero torque and minimum orientational energy. Any calculation claiming a positive kinetic energy after such a spontaneous turn has the torque sign or energy change wrong. A meaningful release problem must specify a displaced orientation or some external input.
The energy expression follows from rotational work: the component of torque in the increasing-θ direction is −mB sin θ, so dU/dθ = mB sin θ. Integrating gives U = −mB cos θ plus an arbitrary reference constant. Parallel alignment has U = −mB, antiparallel has U = +mB. This sign check independently distinguishes stable and unstable equilibrium.
Problem
A coil with m = 10 A m² and rotational inertia J = 0.10 kg m² is released from rest with its normal perpendicular to B = 2.0 T. Find its angular speed as it first reaches parallel alignment.
- 1.Initial U = 0 at 90°; final U = −mB = −20 J at 0°. The decrease of 20 J becomes rotational kinetic energy if losses are negligible.
- 2.Jω²/2 = 20 J gives ω = √(40/0.10) = 20 rad s⁻¹. At the final orientation instantaneous torque is zero, but the coil can still have angular speed.
- 3.Reversing this process from rest in the stable position would require external work. Zero instantaneous torque and zero angular speed are different statements.
A loop looks like a dipole from far away
The axial field derived earlier is μ₀NIR²/[2(R² + x²)^(3/2)]. For |x| much larger than R, replace the denominator by |x|³. Since m = NIπR², the numerator can be expressed in terms of the magnetic moment. This shows why magnetic moment controls distant behaviour even though the exact near field depends on the loop’s shape and size.
This resembles an electric dipole’s distance dependence and torque law, but the physical sources differ. Electric dipoles can be assembled from two separated opposite charges. A current loop has no isolated magnetic charge at either side; its field lines close. The loop’s effective north and south labels do not make it two actual magnetic monopoles. Intrinsic particle magnetic moments also require more than a classical circulating-charge picture.
Problem
A 30-turn circular coil of radius 8.0 cm carries 6.0 A in B = 1.0 T with its normal at 60°. Find the holding counter-torque and compare an irregular planar coil of the same area.
- 1.m = NIπR² = 30 × 6.0 × π × (0.080)² = 3.619 A m². Magnetic torque magnitude = mB sin 60° = 3.13 N m.
- 2.A holding torque must have equal magnitude and opposite direction. Replacing the circle by a planar irregular loop with the same area, turns, current and orientation leaves this uniform-field torque unchanged.
- 3.Its near field need not be identical. The same magnetic moment determines dipole behaviour and uniform-field torque, not every local property.
Constrained rotation and flexible loops
A horizontal loop has a vertical area normal. Its torque m × B is horizontal for any B; it has no vertical component. A uniform field therefore cannot spin that loop about its own vertical axis if it is constrained to remain horizontal. A field may instead try to tilt it. The allowed axis of rotation matters as much as torque magnitude.
A flexible fixed-length loop carrying maintained current in a perpendicular external field can feel local outward forces. If it is free to deform and tension and other constraints permit, it tends toward a circle, the shape of greatest area for a given perimeter. This is a conditional tendency, not a universal rule for every flexible wire in any field. In stable alignment the external flux through a rigid fixed-area loop is maximal; any fixed self-flux contribution does not change that orientation comparison. Flux language does not replace a force or energy analysis when area, current or shape is also changing.
Quick Quiz
Quiz
The angle in τ = NIAB sin θ is between B and
Explanation: Magnetic moment is along the area normal, so the torque cross product uses that angle.
When m is antiparallel to B, equilibrium is
Explanation: Torque is zero exactly, but a small displacement grows rather than being restored.
A coil initially at rest exactly in stable alignment can do what under uniform B alone?
Explanation: It is at zero torque and minimum orientational energy.
At equal large distances, axial dipole-field magnitude compared with equatorial magnitude is
Explanation: The axial and equatorial coefficients are 2m and m.
For two planar loops with equal N, I and area in the same uniform field and orientation, torque is
Explanation: The moment NIA controls uniform-field torque, irrespective of planar shape.
Practice Problems
- A 50-turn coil of area 0.020 m² carries 0.20 A in 0.30 T, with its normal at 60°. Find m and torque.
- A loop plane is at 20° to B. Express its torque using that angle.
- A dipole m = 0.40 A m² in 0.50 T turns quasistatically from parallel to antiparallel. Find the external work.
- A small dipole’s axial field is 8.0 μT at a large distance r. Estimate its equatorial field at 2r.
- Why can a horizontal current loop not spin about its vertical normal under a uniform magnetic field?
m = NIA = 50 × 0.20 × 0.020 = 0.20 A m². τ = mB sin 60° = 0.20 × 0.30 × 0.866 = 0.0520 N m. The area normal fixes the angle.
Key Takeaways
• A uniform field can exert a couple despite zero net loop force. • Magnetic moment is NIA along the current-defined area normal. • Torque is m × B, with magnitude mB sin θ. • Parallel alignment is stable; antiparallel alignment is unstable. • A stable coil at rest cannot gain rotational energy spontaneously. • Dipole energy is −mB cos θ for fixed moment. • Distant axial and equatorial fields vary as 1/r³. • Equal moment does not imply identical near fields.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…