Moving Charges and Magnetism · Lesson 7 of 10
Forces Between Parallel Currents
“Combine a wire’s field with the force law to explain attraction, repulsion and the historical current standard.”
• Derive the force per unit length between long parallel currents. • Determine attraction or repulsion using two right-hand-rule steps. • Distinguish historical and modern definitions of the ampere. • Apply superposition to compare wire forces and external background effects.
A current is both a source and a responder
A current produces B around its wire. A different current-carrying wire placed in that field experiences a force. Combining these two ideas explains why electrically neutral parallel wires can attract or repel. First find the field of wire a at wire b. Then apply the wire-force law to current b. Do not use the field of a wire at itself.
Assume two straight parallel wires are sufficiently long compared with their separation d and the observed segment length. Their radii are small compared with d; fields and forces are evaluated away from the ends and return paths. Let their currents be I_a and I_b. The magnetic field made by a at b has the same magnitude along the parallel segment, so the force formula can use that field directly.
Check directions explicitly
Choose wires vertical in the page, a on the left and b on the right, each carrying current upward. At b, a’s field is into the page: y × x = −z. The force on b is along y × (−z) = −x, toward a. At a, the field from b is out of the page, so y × z = x, toward b. Thus parallel currents attract. Reverse one current: either its source field or its responding current reverses, so both forces become repulsive.
The rule differs from the electrostatic statement that like charges repel. It concerns directions of currents, not signs of two point charges. Charge distribution, electric forces and circuit constraints can also matter in a real installation; the stated expression isolates the magnetic interaction under the ideal assumptions.
Problem
Currents 8.0 A and 5.0 A flow in the same direction in long wires separated by 4.0 cm. Find the force on a 10 cm section.
- 1.Convert d = 0.040 m and L = 0.10 m. F/L = (2.0 × 10⁻⁷)(8.0)(5.0)/0.040 = 2.0 × 10⁻⁴ N m⁻¹.
- 2.F = (2.0 × 10⁻⁴)(0.10) = 2.0 × 10⁻⁵ N, toward the other wire.
- 3.Both wires experience equal force magnitudes on corresponding equal-length sections in this steady parallel idealisation.
Dependence and superposition
Doubling either current doubles force; doubling both multiplies it by four. Doubling separation halves force. Doubling the observed segment length doubles total force but does not change force per length. These comparisons hold only while the long-wire geometry and current values remain valid. Bending the wire or moving near a return path changes the field calculation.
Problem
Three equally spaced long wires lie at x = −d, 0 and +d, all carrying the same upward current I. What is the net magnetic force on the middle wire?
- 1.The left and right wires each attract the middle wire with magnitude μ₀I²L/(2πd). The directions are opposite, so the net force is zero.
- 2.The two magnetic fields at the middle wire also cancel. Its own field is not included as an external force source.
- 3.If only the right current is reversed, the left wire attracts leftward while the right wire repels leftward. The two contributions add rather than cancel.
The ampere: a historical force standard and the present SI
Historically, the ampere was defined through the force between ideal long parallel conductors: two equal currents of 1 A separated by 1 m in vacuum corresponded to a force per length of 2 × 10⁻⁷ N m⁻¹. That definition fixed μ₀ exactly at 4π × 10⁻⁷ in its SI units. The force law remains useful, but that is no longer the defining standard.
The modern ampere is defined by fixing the elementary charge exactly at e = 1.602176634 × 10⁻¹⁹ C, with C = A s and the second independently defined. One ampere corresponds to a net charge-transfer rate of one coulomb per second, about 6.2415 × 10¹⁸ elementary charges per second. Vacuum permeability is now experimentally determined, although its approximate value is indistinguishable from 4π × 10⁻⁷ at the precision used here.
Stray fields matter in a force-based current measurement. A 1 A wire perpendicular to a 3.0 × 10⁻⁵ T horizontal background field experiences 3.0 × 10⁻⁵ N m⁻¹ from that component. This is 150 times the historical 1 A, 1 m wire-pair force. Precision comparisons therefore need to account for environmental fields and geometry; the small ideal force cannot simply be read as the only force on a wire.
Momentum and the boundary of the model
The equal and opposite steady parallel-wire forces agree with Newton’s third law for this configuration. It is unsafe to generalise an instantaneous mechanical action-reaction pair to every moving-charge situation. In time-dependent electromagnetism the fields can carry momentum, so conservation applies to particles, conductors and fields together. This keeps the conservation principle intact without forcing an incomplete mechanical picture onto the system.
Quick Quiz
Quiz
Parallel currents in two long wires
Explanation: The field of one wire and the force on the other give attraction for the same conventional-current direction.
Doubling both currents and doubling separation changes force per length by a factor of
Explanation: The factor is 2 × 2 / 2 = 2.
Which field belongs in the force on wire b due to a?
Explanation: Source and observation location must be distinguished.
The modern ampere is defined through a fixed value of
Explanation: The modern SI fixes e exactly and relates C to A s.
Reversing both wire currents leaves the magnetic interaction
Explanation: Both current directions reverse together, preserving their relative parallel or antiparallel character.
Practice Problems
- Two parallel wires each carry 10 A and are 5.0 cm apart. Find force per metre and on 0.20 m.
- One wire’s current triples, the other halves, and separation triples. Find the force ratio.
- Two 1 A wires separated by 1 m are compared with a 1 A wire perpendicular to a 3.0 × 10⁻⁵ T background field. Compare force per length.
- Explain why “same charge signs repel” does not determine the force between neutral current-carrying wires.
- Three equally spaced wires carry I upward on the left, I upward in the middle, and I downward on the right. Find net force per length on the middle.
F/L = (2.0 × 10⁻⁷)(100)/0.050 = 4.0 × 10⁻⁴ N m⁻¹. On 0.20 m, F = 8.0 × 10⁻⁵ N. It is attractive for parallel currents and repulsive for antiparallel currents.
Key Takeaways
• Each wire creates a field that acts on the other wire’s current. • For long wires F/L = μ₀I_aI_b/(2πd). • Parallel currents attract; antiparallel currents repel. • The force varies inversely with separation. • The force-based ampere definition is historical. • The modern ampere fixes the elementary charge exactly. • Environmental magnetic fields can dominate small wire-pair forces.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…