Skip to lesson content

Lesson 1 of 10

Moving Charges and Magnetism · Lesson 1 of 10

Magnetic Fields and the Lorentz Force

“Connect current-produced magnetic fields to the magnitude, direction and energy consequences of the Lorentz force.”

Learning Objectives

• Explain the observations in Oersted’s experiment and distinguish a source field from its force on a probe. • Use cross products and the charge sign to determine magnetic-force directions. • Calculate magnetic and electric contributions to the Lorentz force. • Explain why a magnetic force changes momentum direction without doing work on a point charge.

A current changes the space around a wire

Place a compass near a straight wire and compare its direction with the current switched off and on. When the wire’s field is appreciable relative to the local terrestrial field, the needle turns. Reversing the current reverses the wire’s contribution to the deflection. Increasing current or bringing the compass nearer strengthens that contribution. Oersted’s observation connected two phenomena previously studied separately: electricity and magnetism. The compass responds to the vector sum of the wire’s field and the background field, so a small current need not make it point exactly along the wire’s circular field lines.

For a long straight wire, a ring of compasses in a plane perpendicular to the wire reveals tangential directions around concentric circles. A field line is a map of the field direction, not a track followed by an electric charge. The north-seeking end of a small compass aligns with the local magnetic field. Iron filings can reveal a pattern, but they are probes that interact with the field and one another; they are not the field itself.

B upwardB downwardI out of page
Field circles around an outward current— Viewed along the wire: outward current produces anticlockwise field. Compass north ends align tangentially when this field dominates the background.

Source, field and response

Separate the problem into two questions: what magnetic field is present at a point, and what does that field do to a moving charge there? A steady current is one source of magnetic field. Magnetic moments of particles also contribute to magnetism; an electron’s intrinsic moment is not explained as an ordinary tiny spinning charged ball. The magnetic field B is a vector defined throughout space. Fields from several sources add as vectors. Once the total external field at a particle is known, calculate the force using the particle’s charge and velocity.

Electric and magnetic fields are parts of one electromagnetic description. Their separation depends on the reference frame. A particle momentarily at rest has no magnetic part of the point-charge Lorentz force in that frame; this does not establish a preferred frame or make electromagnetism disappear. Electric fields can change between frames as well. Here all stated fields and velocities refer to one chosen laboratory frame, and source currents are steady.

The Lorentz force

Electric and magnetic forcesLaTeX
q is signed charge in C; E is electric field in N C⁻¹; v is velocity in m s⁻¹; B is magnetic field in T; F is force in N. The electric and magnetic forces must be added as vectors.

The magnetic part is an experimentally established law for a point charge, not a consequence obtained merely by analogy with Coulomb’s law. The cross product has magnitude vB sin θ, where θ is the angle between velocity and field. Its direction is perpendicular to the plane containing those two vectors. Thus a field can be nonzero while its magnetic force on a particular charge is zero: the charge may be at rest, or move parallel or antiparallel to the field.

Magnetic-force magnitudeLaTeX
Use |q| for a nonnegative magnitude. Use the signed q in the vector equation to determine direction. θ lies between 0 and π.

Find direction before substituting numbers

Choose x to the right, y upward and z out of the page. The cyclic cross products are x × y = z, y × z = x and z × x = y. Reversing the order changes the sign. Point the right-hand fingers from v toward B through the smaller angle; the thumb gives v × B. For a positive charge this is the force direction. For a negative charge reverse that result once. Do not reverse both the velocity and the force just because the charge is negative.

v to right+q: F upward−q: F downwardB into page (crosses)v right
Positive and negative charges in the same field— Schematic: v is rightward and B is into the page for both charges. Apply the charge sign after taking v × B.

The dot symbol represents an arrow tip coming toward you; a cross represents its tail moving away. These encode the third dimension on a flat page. Test the drawing algebraically: x × (−z) = y, so a positive charge moving right through an inward field is forced upward. A negative charge with the same velocity is forced downward.

Units and measurable meaning

The teslaLaTeX
A 1 C charge moving at 1 m s⁻¹ perpendicular to a 1 T field experiences 1 N of magnetic force. One gauss is 10⁻⁴ T.

Magnetic field has dimensions M T⁻² I⁻¹, where I here denotes the dimension of electric current. A field of one tesla is large compared with the terrestrial field, typically a few tens of microtesla. Do not use an Earth-field value as a universal constant: location and orientation matter.

Force direction for two particles

Problem
A proton and an electron each move along +x through a field along +y. Find their force directions.

  1. 1.The cross product x × y points along +z. The proton has positive charge, so its force is out of the page.
  2. 2.The electron has negative charge, so its force is along −z, into the page. Their force magnitudes are equal if their speeds and charge magnitudes are equal; their accelerations need not be equal because their masses differ.
Adding two contributions

Problem
A charge +2.0 μC moves at 3.0 × 10⁴ m s⁻¹ along +x. B = 0.20 T along +z and E = 400 N C⁻¹ along +y. Find total force.

  1. 1.The magnetic direction is x × z = −y. Its magnitude is (2.0 × 10⁻⁶)(3.0 × 10⁴)(0.20) = 0.012 N.
  2. 2.The electric force is (2.0 × 10⁻⁶)(400) = 8.0 × 10⁻⁴ N along +y. Hence net force is −0.0112 N along y, or 1.12 × 10⁻² N downward. Opposing directions require subtraction, not addition of magnitudes.

Why a magnetic force does no work

Work measures energy transfer through displacement. Over a short time dt, the displacement is v dt. The magnetic force is perpendicular to v at that instant, so its dot product with displacement is zero. The velocity can still change direction, which changes vector momentum. Zero work means no change of kinetic energy due to that force; it does not mean zero force or zero acceleration.

Instantaneous powerLaTeX
For a point charge the magnetic term does no work. An electric field can change speed. Radiation and other interactions are neglected in the simple trajectory models used here.

Predict the effect of doubling speed while keeping q, B and θ fixed. The magnetic force doubles, but still has zero instantaneous power. Force magnitude and energy-transfer rate are different quantities. Later, a wire or coil may move mechanically while a source maintains its current; its energy accounting includes that electrical source and is not contradicted by the point-charge result.

Quick Quiz

Quiz

Quick check

A stationary point charge in a nonzero magnetic field has what magnetic force?

Explanation: The velocity factor vanishes. An electric force may still exist if E is nonzero.

Quick check

For positive q, v along +x and B along +y, the magnetic force points

Explanation: The cyclic cross product x × y = z gives the direction for positive charge.

Quick check

If θ changes from 90° to 30° at fixed speed and field, magnetic-force magnitude becomes

Explanation: The ratio is sin 30°/sin 90° = 1/2.

Quick check

A magnetic force can change which quantity for an isolated nonrelativistic particle?

Explanation: A perpendicular force changes the velocity direction while its work remains zero.

Quick check

Which is a correct unit of B?

Explanation: The wire-force relation gives B = F/(Il), with unit N/(A m).

Practice Problems

Practice Problems
  1. A +3.0 μC particle moves at 2.0 × 10⁴ m s⁻¹ at 30° to a 0.40 T field. Find the magnetic-force magnitude.
  2. An electron moves upward (+y) through B directed out of the page (+z). Determine the magnetic-force direction.
  3. A charge feels no magnetic force. Can you conclude that B is zero?
  4. For v = 5.0 × 10⁴ m s⁻¹ along +x and B = 0.010 T along +z, what electric field cancels the magnetic force for a charged particle?
  5. Explain how speed stays constant even though a magnetic field continuously changes velocity.

Use F = |q|vB sin θ. Substitution gives (3.0 × 10⁻⁶)(2.0 × 10⁴)(0.40)(0.5) = 0.012 N. This is the perpendicular force magnitude, not a force component along the motion.

Key Takeaways

Key Takeaways

• Currents produce magnetic fields, and fields from several sources add vectorially. • A field and its force on a probe are different quantities. • The point-charge Lorentz force is q(E + v × B). • Magnetic-force magnitude is |q|vB sin θ. • Find v × B first, then reverse for negative charge. • Magnetic force changes momentum direction without doing work on the particle. • A tesla is N A⁻¹ m⁻¹; 1 G = 10⁻⁴ T.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…