Atoms · Lesson 4 of 7
Atomic Energy Levels and Ionisation
“Explain quantised hydrogen energies, negative binding energy, excitation and ionisation, with scaled energy-level diagrams and collision examples.”
• Derive Eₙ by combining the Coulomb energy with the allowed radius. • Read bound levels and the ionisation threshold on an energy diagram. • Calculate excitation and ionisation energies without sign errors. • Distinguish photon absorption from electron-impact excitation.
Allowed radii imply allowed energies
Bohr’s radius condition has an important consequence. In the circular Coulomb model, total energy depends on radius as E = −ke²/(2r). If only selected radii are permitted, only selected energies are permitted. Substitution makes this connection explicit and explains why discrete atomic levels are not an independent list of memorised values.
Check dimensions before substituting constants: ke² is J m and ħ is J s, so mₑ(ke²)²/ħ² has dimensions kg m²/s², or joules. The energy is negative because the atom is bound relative to a separated electron and proton at rest. The approximation predicts the leading hydrogen energies, not all details of precise spectral structure.
| n | Eₙ (eV) | Kₙ (eV) | Uₙ (eV) |
|---|---|---|---|
| 1 | −13.60 | +13.60 | −27.20 |
| 2 | −3.400 | +3.400 | −6.800 |
| 3 | −1.511 | +1.511 | −3.022 |
| 4 | −0.850 | +0.850 | −1.700 |
| 5 | −0.544 | +0.544 | −1.088 |
The ground state is n = 1, the lowest available energy. “Lowest” means most negative: −13.6 eV is below −3.4 eV. An excited state has n > 1 and a higher total energy, even though its kinetic energy is smaller in this model. Use E = −K and U = 2E to connect the table with the earlier mechanical derivation.
Ionisation is reaching a threshold
To ionise means to separate the electron from the atom. With the chosen energy zero, E = 0 is the ideal threshold at infinite separation with vanishing relative kinetic energy. It is not another bound state with a very large finite radius. The notation n → ∞ expresses the limit of the bound-state sequence. For positive energy there is a continuum of unbound electron–proton states, rather than more discrete bound orbits.
An atom already excited is easier to ionise because its initial energy is closer to zero. There is no contradiction in saying “the energy increases while the binding energy decreases”: the total energy rises from a large negative value toward zero, while the positive energy still required to escape becomes smaller. Binding energy here means Iₙ, not the magnitude of the electrostatic potential energy.
Excitation changes one bound state to another
Problem
Calculate the energy needed to excite hydrogen from n = 1 to n = 2 and compare it with ionisation.
- 1.E₁ = −13.6 eV and E₂ = −3.4 eV. The excitation energy is E₂ − E₁ = −3.4 − (−13.6) = 10.2 eV.
- 2.The excited atom remains bound by 3.4 eV. Adding that remaining amount reaches the threshold: 10.2 + 3.4 = 13.6 eV.
- 3.Excitation does not free the electron. It leaves the atom in another bound state with a less negative energy.
A bound-to-bound single-photon absorption requires a photon whose energy matches an allowed transition, within physical line width and the relevant transition rules. A photon below the ground-state ionisation energy is not automatically absorbed. A photon above the threshold can ionise, and the excess energy becomes kinetic energy of the outgoing particles. Very small recoil corrections are neglected in the following introductory calculations.
Problem
A ground-state hydrogen atom absorbs a 15.0 eV photon in an ionisation event. Estimate the outgoing electron kinetic energy.
- 1.The minimum energy to reach the continuum is 13.6 eV. Conservation of energy leaves 15.0 − 13.6 = 1.4 eV as kinetic energy.
- 2.Neglecting nuclear recoil, the electron receives approximately 1.4 eV. Using v = √(2K/mₑ), with K = 1.4 × 1.602 × 10⁻¹⁹ J, gives v ≈ 7.02 × 10⁵ m/s.
- 3.The word absorbs matters: the calculation describes the energy balance if ionisation occurs, not a claim that every incident photon is captured.
A colliding electron can keep leftover energy
A projectile electron can lose only part of its kinetic energy in an inelastic collision and leave with the remainder. Therefore its incident kinetic energy need not exactly equal the excitation energy. It must at least supply the energy difference, with recoil and momentum also conserved. This differs from a bound-to-bound single-photon absorption, where the whole photon is absorbed. At room temperature, an isolated dilute atomic hydrogen sample is overwhelmingly in the ground state unless an external process excites it; everyday hydrogen gas is usually molecular, which is a different system.
Problem
Find the highest principal level accessible from ground-state atomic hydrogen in one impact, neglecting recoil.
- 1.Thresholds are ΔE₁→₂ = 10.2 eV; ΔE₁→₃ = 13.6(1 − 1/9) = 12.089 eV; ΔE₁→₄ = 13.6(1 − 1/16) = 12.75 eV.
- 2.12.5 eV can supply the first two thresholds but cannot reach n = 4 or the 13.6 eV continuum. Thus n = 3 is the highest accessible level under the stated single-impact assumptions.
- 3.After excitation to n = 3 the projectile can retain about 12.5 − 12.089 = 0.411 eV. Later light emission can follow direct or cascade transitions, studied next.
Why upper levels crowd together
The separation between neighbouring levels is 13.6[1/n² − 1/(n + 1)²] eV. It is positive, but decreases as n grows. On a linear energy axis, the low-lying gap from n = 1 to 2 is much larger than the gap from 4 to 5. Do not draw equally spaced horizontal levels when the figure is meant to show energy quantitatively. In the Bohr model the orbital radii spread farther apart even as the energies crowd closer: the two diagrams represent different quantities.
Quick Quiz
Quiz
Which hydrogen state has the lowest total energy?
Eₙ = −13.6/n² eV is most negative at n = 1, making it the lowest available state.
What is the minimum energy to ionise hydrogen from n = 4?
E₄ = −0.85 eV. Reaching zero requires adding +0.85 eV.
What energy is required for n = 1 to n = 3?
Subtract E₁ from E₃: −1.511 − (−13.6) = 12.089 eV.
Why can a 12.5 eV electron excite a 12.09 eV transition?
An inelastic electron collision transfers part of the incident kinetic energy while conserving total energy and momentum.
What does E = 0 represent on the ideal hydrogen diagram?
Zero is the separated electron–proton reference at vanishing relative kinetic energy; positive energies form an unbound continuum.
Practice Problems
- For n = 3, calculate E, K, U and the ionisation energy.
- Find the energy needed for n = 2 to n = 4, and show that this excitation plus subsequent ionisation equals the original n = 2 ionisation energy.
- Can a ground-state hydrogen atom absorb a 12.0 eV photon as a bound-to-bound single-photon transition in this ideal level model?
- Find the highest level accessible from the ground state with an incident electron of 12.8 eV in one collision, and its residual kinetic energy if that level is excited.
- Compare the n = 1 to 2 and n = 4 to 5 energy gaps. What should a correctly scaled diagram show?
E = −13.6/9 = −1.511 eV. Circular Bohr relations give K = −E = +1.511 eV and U = 2E = −3.022 eV. The ionisation energy is 0 − E = +1.511 eV. Check K + U = E.
Key Takeaways
• Hydrogen’s leading Bohr energies are Eₙ = −13.6/n² eV. • The ground state has the most negative allowed total energy. • Ionisation energy is the positive amount 0 − Eₙ. • Excitation energy is a difference between bound levels. • A larger n gives higher total energy but smaller binding energy. • Bound-to-bound single-photon absorption requires a matching transition. • Electron-impact excitation can leave the projectile with residual kinetic energy. • Energy levels crowd near the continuum even as Bohr radii spread apart.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…