Skip to lesson content

Lesson 2 of 7

Semiconductor Electronics · Lesson 2 of 7

Intrinsic Semiconductors and Electron–Hole Conduction

“Build a microscopic picture of pure silicon, thermal carrier generation and the two contributions to conventional current.”

Learning Objectives

• Explain covalent bonding and thermal electron–hole pair generation. • Distinguish a conduction electron from a hole in the valence band. • Track electron motion, hole motion and conventional current consistently. • Use intrinsic carrier equality and add electron and hole currents.

A pure crystal can still contain mobile carriers

Imagine a chemically pure silicon crystal connected to a small voltage. At a finite temperature it can carry a small current even though no donor or acceptor atoms have deliberately been added. The carriers arise from the crystal itself. Such a material is called intrinsic. The word pure refers to composition; it does not mean that every bond remains unexcited or that no charge can move.

Four neighbours and shared electrons

Each silicon atom has four valence electrons and forms covalent bonds with four nearest neighbours in a three-dimensional, tetrahedrally coordinated structure. A bond contains a shared pair of electrons, with one contributed by each neighbouring atom in the simple bonding picture. Germanium has a similar arrangement. A flat drawing with four neighbours is a useful connection map, but the real crystal is not a square sheet.

Covalent connectivity and electron-hole excitationBond picture and energy pictureFour-neighbour connectivityThermal excitationSiSiSiSiSiFlat schematic of a 3D latticeConduction bandValence bandEnergy inElectron (filled) + hole (open)
Covalent bonds and thermal pair generation— The left panel is a schematic connectivity map of a three-dimensional crystal. The right panel shows the corresponding energy change: one conduction electron and one valence-band hole are created together.

In the ideal zero-temperature intrinsic model the bonding valence band is full and the conduction band empty. At a higher temperature, energy exchange with the vibrating crystal can excite a valence electron across the gap. The excited electron now occupies a conduction-band state and can move through the crystal. Its former valence state is vacant. This vacancy is called a hole. It is useful to treat the vacancy as a mobile carrier with effective charge +e.

The electron is not destroyed when the hole appears. It is the same electron now occupying a different state; the empty state is a second feature of the excitation. The pair has zero total charge, because the conduction electron contributes −e and the effective hole +e. This bookkeeping explains why thermal generation does not charge an initially neutral crystal. It also explains why counting only the excited electrons would miss part of the current.

Intrinsic carrier equalityLaTeX
n is conduction-electron concentration, p is hole concentration and nᵢ is the intrinsic carrier concentration at the stated temperature. All are number densities, with SI unit m⁻³.
Concentration is not a total count

Problem
An intrinsic sample has nᵢ = 1.5 × 10¹⁶ m⁻³ and volume 2.0 mm³. How many conduction electrons and holes does it contain on average?

  1. 1.Use the specified temperature, because nᵢ depends strongly on it. Convert volume: 2.0 mm³ = 2.0 × 10⁻⁹ m³.
  2. 2.The average electron count is nV = (1.5 × 10¹⁶)(2.0 × 10⁻⁹) = 3.0 × 10⁷. Intrinsic equality gives the same hole count.
  3. 3.There are 3.0 × 10⁷ of each mobile carrier, not that many positively charged dopant atoms. Concentrations have unit m⁻³; multiplication by volume gives dimensionless particle counts.

How a vacancy moves without becoming a particle of matter

Label three successive valence-bond positions A, B and C. Suppose A is empty. A neighbouring valence electron can fill A from B, leaving B empty. Another can fill B from C, leaving C empty. The hole has moved from A toward C, while each participating electron moved toward A. A vacancy can therefore transport positive charge in an effective description even though the underlying transfers are made by electrons.

A moving hole is a sequence of valence-electron transfersA hole follows successive valence-electron transfersElectric fieldStep 1ABCElectron transferStep 2ABCElectron transferStep 3ABCHole motion and conventional currentConduction e⁻
Hole motion and conventional current— Each successive panel follows one valence-band vacancy. Valence electrons move left as the hole moves right. A separate conduction electron also drifts left under the indicated rightward electric field.

The conduction electron created by the original thermal event is not required to follow this hole. It moves in the conduction band and is a distinct carrier. Hole transport describes changes in valence-band occupancy. A hole is neither a proton travelling between lattice sites nor an empty atom drifting through the sample. The lattice ions stay near their crystal positions in this model.

Random thermal motion versus drift

Without an applied field, mobile carriers have random thermal motion. In a uniform sample this produces no preferred net current direction. Apply an electric field to the right. A conduction electron has negative charge, so its average drift is left. A hole behaves as positive charge and its drift is right. Conventional current is defined using positive-charge transport: leftward motion of negative charge contributes rightward current. Thus both carrier contributions have the same conventional-current direction, along the field.

CarrierEffective chargeDrift for a rightward fieldConventional current
Conduction electron−eLeftRight
Valence-band hole+eRightRight
Two carrier contributionsLaTeX
For ordinary drift through the same section, Iₑ and Iₕ are conventional-current contributions measured in the same reference direction. Add them algebraically; do not subtract merely because carrier velocities are opposite.
Add current rather than velocity

Problem
A field points right. Conduction electrons provide 0.80 mA of conventional current and holes provide 0.35 mA. Find total current and state both drift directions.

  1. 1.The conduction-electron drift is left because the electron charge is negative. The hole drift is right.
  2. 2.Both currents are rightward, so I = 0.80 + 0.35 = 1.15 mA to the right. Over 2.0 s the transported conventional charge is Q = It = 2.30 × 10⁻³ C.
  3. 3.Equal intrinsic concentrations do not require equal current contributions: the two carrier types can have different mobilities. Opposite drift velocities therefore do not cancel the measured current.

Generation and recombination establish a dynamic balance

An electron can return from the conduction band into an empty valence state. This removes one conduction electron and one hole and releases energy to the surroundings, for example through crystal vibrations. The process is called recombination. Thermal excitation creates pairs; recombination removes pairs. At a fixed temperature in thermal equilibrium the average rates balance, so carrier concentrations remain steady even while individual events continue.

Steady thermal balanceLaTeX
G and Rrec are pair-generation and pair-recombination rates per unit volume, in m⁻³ s⁻¹. This equality describes thermal equilibrium and does not imply that carriers stop moving.

If the crystal is warmed, the previous balance changes. More carriers are thermally generated, and a new equilibrium develops with a larger intrinsic concentration. Mobility also changes with temperature, but the strong increase of carrier population ordinarily makes intrinsic semiconductor conductivity rise over the relevant range. This differs from the familiar rise in resistance of a metal, whose mobile-electron population changes much less. Do not extend a simple trend through melting, strong fields or every possible material condition.

Interpret a change in carrier population

Problem
An intrinsic sample of fixed volume has nᵢ = 1.0 × 10¹⁵ m⁻³ at one temperature and nᵢ = 4.0 × 10¹⁵ m⁻³ at a higher temperature. What changes can be concluded?

  1. 1.At the first temperature, n = p = 1.0 × 10¹⁵ m⁻³. At the second, both become 4.0 × 10¹⁵ m⁻³: each population is four times as large.
  2. 2.The total mobile-carrier concentration n + p rises from 2.0 × 10¹⁵ to 8.0 × 10¹⁵ m⁻³. Pair generation maintains equality rather than introducing net charge.
  3. 3.Conductivity would increase fourfold only if both mobilities stayed unchanged. Without that extra assumption the exact conductivity ratio is not determined by these concentrations alone.

A prediction to carry into the next lesson

Thermal excitation gives an electron and a hole together. Can a crystal instead acquire many extra conduction electrons without acquiring the same number of mobile holes? Yes, if another part of the material supplies balancing fixed charge. The next lesson introduces carefully chosen impurity atoms. They change the carrier population while preserving overall electrical neutrality.

Quick Quiz

Quiz

Quick check

A thermal excitation in ideal intrinsic silicon creates

The electron is promoted out of a valence state. Its former state becomes vacant, so pair creation changes both populations by the same amount.

Quick check

What is a hole in this model?

A neighbouring valence electron can fill the vacancy and leave a new vacancy behind. The effective motion is opposite to those electron transfers.

Quick check

For an electric field directed right, which statement is correct?

Force and drift depend on carrier charge. Conventional current reverses the direction of negative-carrier motion, so both contributions align with the field.

Quick check

At thermal equilibrium, G = Rrec means

Equilibrium is a statistical balance of ongoing events. It fixes average populations under the stated conditions, not the identity or motion of every carrier.

Quick check

Electron and hole conventional currents are 2 mA and 1 mA in the same direction. The total is

Add the conventional-current contributions: 2 + 1 = 3 mA. Carrier velocity directions have already been accounted for in defining each current.

Practice Problems

Practice Problems
  1. An intrinsic crystal has nᵢ = 2.0 × 10¹⁶ m⁻³ and volume 0.50 mm³. Find the electron and hole counts.
  2. Show with positions A, B and C how a hole moves from A to C when valence electrons move the other way.
  3. A field points left. State electron drift, hole drift and conventional current directions. If the two current contributions have magnitudes 0.60 mA and 0.20 mA, find total charge transported in 5 s.
  4. A student says a steady carrier concentration proves generation has stopped. Explain why this is incorrect and predict what happens after a temperature rise.
  5. Why does n = p not force Iₑ = Iₕ, and why is it incorrect to say a hole is a missing atom?

The volume is 0.50 × 10⁻⁹ m³. Each concentration equals nᵢ, so each count is (2.0 × 10¹⁶)(0.50 × 10⁻⁹) = 1.0 × 10⁷. There are equal mobile populations of opposite effective charge; their creation alone does not charge the sample.

Key Takeaways

Key Takeaways

• An intrinsic semiconductor has no deliberate donor or acceptor doping. • Thermal excitation creates a conduction electron and a valence-band hole together. • For an ideal intrinsic material n = p = nᵢ at the specified temperature. • Hole motion describes a sequence of valence-electron transfers, not proton motion. • Electrons drift against the field; holes drift with it; both drift currents point with the field. • Generation and recombination continue at equal average rates in thermal equilibrium. • Intrinsic carrier concentration is temperature dependent, and equal populations need not give equal currents.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…