Skip to lesson content

Lesson 3 of 7

Semiconductor Electronics · Lesson 3 of 7

Doping and Extrinsic Semiconductors

“Explain how donor and acceptor atoms control carrier populations without charging the crystal, and calculate majority and minority concentrations.”

Learning Objectives

• Identify suitable donor and acceptor dopants for silicon and germanium. • Distinguish majority carriers, minority carriers and fixed ionised dopants. • Explain shallow donor and acceptor energy levels. • Calculate carrier concentrations using neutrality and the equilibrium product rule.

A tiny chemical change, a large electrical change

A pure silicon crystal has relatively few mobile carriers at room temperature. Introducing a very small number of suitable impurity atoms can change that population dramatically. Deliberately adding those atoms is called doping, and the resulting semiconductor is extrinsic. Parts per million can be enough: one dopant atom per million host atoms is a small chemical change, but it can outnumber the carriers generated thermally in the original crystal.

The dopant must fit suitably into the host lattice and provide useful electronic states; adding arbitrary dirt does not produce a controlled semiconductor. Silicon and germanium are group-14 elements with four valence electrons. Group-15 atoms such as phosphorus, arsenic and antimony can act as donors. Group-13 atoms such as boron, aluminium and indium can act as acceptors. The crystal remains overwhelmingly host material.

Donors supply electrons: n-type material

Consider a phosphorus atom replacing one silicon atom. Four of its five valence electrons participate in the neighbouring covalent bonds. The extra electron is weakly bound in the crystal compared with a normal valence electron. A small thermal energy can release it into the conduction band. The dopant has then lost a mobile electron and becomes a positively charged, ionised donor. It remains fixed at its lattice site; the released electron is mobile.

Ionised dopants and majority mobile carriersAfter ionisation: fixed dopant + mobile carrierDonor+Fixed ione⁻Mobile carrierAcceptor−Fixed ionholeMobile carriern-type: excess electronsp-type: excess holesFixed and mobile charge balance in neutral bulk material.
Donor and acceptor charge bookkeeping— The sketches show substitutional dopants schematically. Ionised donors are fixed positive charges; ionised acceptors are fixed negative charges. The associated majority carriers have the opposite charge.

If donors greatly outnumber thermally generated carriers and are largely ionised, conduction electrons are the majority carriers. Holes still exist through thermal generation but are minority carriers. This is n-type material: n describes the negative mobile majority, not the net charge of the whole sample. The positive donor ions balance the excess electron charge. A neutral n-type crystal is therefore not a negatively charged object.

Acceptors create holes: p-type material

A boron atom has three valence electrons. In the simple bond picture, one neighbouring bond lacks an electron. The dopant can accept an electron from a valence-band state, completing its local bonding arrangement and leaving a mobile hole in the valence band. After accepting that electron, the dopant is a fixed negative ion. It is the hole, not the acceptor ion, that moves through successive valence-electron transfers.

With sufficiently many ionised acceptors, holes are the majority carriers and conduction electrons the minority carriers. This is p-type material. The mobile positive charge is balanced by fixed negative acceptor charge, so the sample can remain neutral. Doping changes which carrier population dominates; it does not change an electron’s charge or turn holes into moving atoms.

Featuren-typep-type
Suitable dopants in Si or GeP, As, Sb: five valence electrons.B, Al, In: three valence electrons.
Ionised dopant chargePositive and fixed.Negative and fixed.
Majority mobile carrierConduction electrons.Valence-band holes.
Minority mobile carrierHoles.Conduction electrons.
Whole-crystal chargeNormally neutral.Normally neutral.
Majority and minority populationsLaTeX
The inequalities describe an appreciably extrinsic regime. Both carrier types remain present; the labels do not specify net sample charge.

Why a small energy can release a dopant carrier

A donor adds a shallow allowed energy level just below the conduction-band edge. An electron needs only the small difference between the donor level and that edge to become mobile. An acceptor adds a shallow level just above the valence-band edge. A valence electron can reach it with a small energy input, leaving a hole behind. These are dopant states within the host gap; they do not require the host valence and conduction bands to overlap.

Shallow donor and acceptor levels in the band gapDopant states lie within the host gapDonorE_CE_VAcceptorE_CE_VDonor levelSmall activation energyAcceptor levelValence electron acceptedEnergy upward; shallow-level separations enlarged for clarity.
Shallow donor and acceptor energy levels— Energy increases upward. The donor-to-conduction transition releases a mobile electron; the valence-to-acceptor transition leaves a mobile hole. The shallow separations are deliberately enlarged for visibility.

Typical shallow dopant activation energies are of order 0.01 eV in germanium and a few hundredths of an eV in silicon, much smaller than the host gaps of about 0.7 eV and 1.1 eV. This explains how dopants can supply many carriers while intrinsic thermal generation remains small. It does not imply that all dopants are ionised at every temperature. At very low temperatures carriers can remain bound; at very high temperatures intrinsic generation can dominate. The useful middle range, where dopants are mostly ionised, often has a majority concentration set mainly by dopant concentration.

Use neutrality and thermal equilibrium together

Let Nᴅ⁺ be the concentration of ionised donors and Nₐ⁻ the concentration of ionised acceptors. Positive charge comes from holes and positive donors; negative charge comes from conduction electrons and negative acceptors. Equal total positive and negative charge gives the neutrality equation below. It counts fixed ions as well as mobile carriers, which is why n need not equal p in an extrinsic material.

Charge neutrality in uniform bulk materialLaTeX
All quantities are concentrations in m⁻³. The equation describes neutral bulk material; a junction depletion region can have local space charge.

A second relation determines the minority population. For a nondegenerate semiconductor in thermal equilibrium at a specified temperature, the product of electron and hole concentrations equals the square of that material’s intrinsic concentration. Increasing one population therefore reduces the other at the same temperature. This is not a conservation of the total number n + p, and it must not be applied indiscriminately to a junction under carrier injection or strong illumination.

Thermal-equilibrium carrier productLaTeX
Use concentrations in one consistent unit system and nᵢ for the same material and temperature. This form assumes nondegenerate carrier statistics and thermal equilibrium.
Majority approximation for a single dopant typeLaTeX
The dopants must be largely ionised and their concentration much greater than nᵢ. Nᴅ and Nₐ here denote the supplied donor or acceptor concentration, with only one type present.
From parts per million to minority carriers

Problem
Silicon contains 5.0 × 10²⁸ host atoms/m³. Add arsenic at one atom per million host atoms. At the stated temperature nᵢ = 1.5 × 10¹⁶ m⁻³. Estimate n and p, assuming ionised donors and thermal equilibrium.

  1. 1.One part per million is 10⁻⁶. Therefore Nᴅ = (5.0 × 10²⁸)(10⁻⁶) = 5.0 × 10²² m⁻³. Arsenic is a donor, so the majority carriers are electrons.
  2. 2.Nᴅ is millions of times larger than nᵢ, making n ≈ Nᴅ consistent. Then p = nᵢ²/n = (1.5 × 10¹⁶)²/(5.0 × 10²²) = 4.5 × 10⁹ m⁻³.
  3. 3.The minority concentration is positive, not zero. Its very small value is consistent with n ≫ p. Fixed positive donors balance the excess mobile electrons; the sample need not acquire net negative charge.
Check the approximation rather than merely using it

Problem
An acceptor-doped sample has Nₐ = 2.0 × 10²¹ m⁻³ and nᵢ = 1.0 × 10¹⁶ m⁻³. Estimate the mobile concentrations.

  1. 1.Assume fully ionised acceptors, no donors and thermal equilibrium. Since Nₐ ≫ nᵢ, take p ≈ 2.0 × 10²¹ m⁻³.
  2. 2.Use np = nᵢ² to find n = 10³²/(2.0 × 10²¹) = 5.0 × 10¹⁰ m⁻³. Holes dominate by a factor of 4.0 × 10¹⁰.
  3. 3.Exact neutrality requires p − n = Nₐ. The omitted n is negligible relative to p, so the majority approximation is justified. If dopant and intrinsic concentrations were comparable, both equations would need solving without dropping a term.

Use the correct comparison

At fixed temperature, adding more donors increases n and lowers p within the stated model. Changing temperature also changes nᵢ, ionisation and mobility, so the same fixed-product numerical comparison no longer applies. Neither intrinsic nor extrinsic conductivity is universally independent of temperature. When two differently doped regions share a continuous crystal, their unequal mobile populations create a new effect: diffusion across their boundary. That is the starting point for a p–n junction.

Quick Quiz

Quiz

Quick check

Which dopant and majority carrier pair describes n-type silicon?

Phosphorus has five valence electrons and can donate an extra electron into the conduction band. The remaining ionised donor is positive and fixed.

Quick check

After an acceptor takes an electron from the valence band, it is

Accepting an electron gives the dopant negative charge. Removing that electron from a valence state leaves a hole that can move through valence-electron transfers.

Quick check

Why is an ordinary n-type crystal overall neutral?

Bulk neutrality includes the fixed dopant charge. It does not require equal mobile carrier concentrations in extrinsic material.

Quick check

At fixed temperature in the stated equilibrium model, n doubles. What happens to p?

The product np = nᵢ² remains fixed at the same temperature. Thus p varies inversely with n, provided equilibrium and the model assumptions continue to hold.

Quick check

Where is a shallow donor level relative to E꜀?

A small energy promotes the weakly bound donor electron into the conduction band. The donor state lies within the host gap near its upper edge.

Practice Problems

Practice Problems
  1. A silicon sample has 5.0 × 10²⁸ host atoms/m³ and 2.0 ppm phosphorus. With nᵢ = 1.5 × 10¹⁶ m⁻³, estimate both carrier concentrations.
  2. At a fixed temperature a p-type sample has p = 4.0 × 10²⁰ m⁻³ and nᵢ = 2.0 × 10¹⁶ m⁻³. Find n and identify the fixed ion charge.
  3. A donor level is 0.045 eV below E꜀ in a host with a 1.10 eV gap. Compare the two excitation energies and explain their different roles.
  4. For a neutral donor-only sample, derive n − p = Nᴅ⁺. Explain why n ≈ Nᴅ fails if dopants are not ionised or their concentration is comparable with nᵢ.
  5. At one temperature n = 8.0 × 10²⁰ m⁻³ and p = 5.0 × 10¹¹ m⁻³. Find nᵢ and predict p if n becomes four times larger at the same temperature within equilibrium.

Nᴅ = (2.0 × 10⁻⁶)(5.0 × 10²⁸) = 1.0 × 10²³ m⁻³. Assuming ionised donors and equilibrium, n ≈ Nᴅ. Then p = (1.5 × 10¹⁶)²/(1.0 × 10²³) = 2.25 × 10⁹ m⁻³. The very large majority-to-minority ratio confirms the approximation.

Key Takeaways

Key Takeaways

• Suitable shallow donors and acceptors control carrier populations at very small dopant fractions. • Donors produce n-type material; acceptors produce p-type material. • Ionised donors are fixed positive charges and ionised acceptors fixed negative charges. • The letters n and p identify majority carriers, not net crystal charge. • Shallow dopant energies differ from the full host band gap. • Use neutrality together with np = nᵢ² under the stated equilibrium assumptions. • Temperature and ionisation conditions must be checked before using majority approximations.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…