Semiconductor Electronics · Lesson 4 of 7
Formation and Equilibrium of a p–n Junction
“Follow carrier diffusion and fixed-charge formation to explain the depletion field, built-in barrier and zero net current at equilibrium.”
• Explain how adjacent p-type and n-type regions form a continuous junction. • Track diffusion, recombination and the fixed charges in a depletion region. • Determine electric-field, drift and conventional-current directions. • Distinguish a built-in potential barrier from an external source of sustained current.
Why putting two carrier populations together changes both
A p-type region has many holes; an n-type region has many conduction electrons. If these regions meet inside a continuous semiconductor crystal, carriers near the boundary can move into regions where their own concentration is lower. The boundary is a p–n junction. It is the key structure behind the rectifying behaviour of a diode. The surprising point is that a junction develops an internal electric field even when no battery is attached.
A practical junction is made by controlled processing that creates adjacent differently doped regions in one continuous crystal. Simply pressing two rough pieces together does not generally make the same structure. A macroscopic interface contains gaps, contamination and disrupted atomic continuity; it may add complicated contact effects instead of the intended junction. Our model assumes a suitable continuous junction with conducting contacts at its ends.
Fix the diagram orientation before discussing motion
Throughout this lesson put the p-region on the left and the n-region on the right. Far from the junction each region is approximately neutral: mobile majority carriers balance fixed ionised dopants. Concentrations differ across the boundary, however. Conduction electrons are much more numerous on the right and holes on the left. Thermal random motion then creates a net diffusion tendency down each carrier’s concentration gradient.
| Process at formation | Physical carrier motion | Conventional-current contribution |
|---|---|---|
| Electron diffusion | n → p; right to left. | p → n; rightward. |
| Hole diffusion | p → n; left to right. | p → n; rightward. |
Diffusion is driven by a concentration gradient, not by attraction between oppositely charged carriers as the primary explanation. Electrons entering the p-side can recombine with holes, and holes entering the n-side can recombine with electrons. Near the interface the mobile majority populations are reduced. Their balancing dopant ions cannot diffuse away because they occupy fixed lattice sites.
The depletion layer contains charge
On the n-side, loss of mobile electrons exposes positive ionised donor charge. On the p-side, loss of holes leaves negative ionised acceptor charge. Together these adjacent space-charge regions form the depletion region. It is depleted of mobile majority carriers compared with the neutral bulk. It is not empty of matter, free of all charge or entirely devoid of every carrier. The fixed charges are exactly what create its electric field.
Electric field points from positive charge toward negative charge, so the depletion field is from n to p: leftward in our drawing. An electron feels force opposite this field and can drift rightward, p→n. A hole feels force along the field and can drift leftward, n→p. These drift motions oppose the respective diffusion tendencies. The narrow depletion width depends on doping, material and bias; a fraction of a micrometre is an illustrative scale, not a fixed width for all junctions.
A dynamic balance produces equilibrium
Initially diffusion dominates because the carrier concentration difference exists before a substantial space-charge field has developed. As charge is exposed, the field grows. The field suppresses further majority-carrier diffusion across the junction and drives an opposing drift contribution. At thermal equilibrium the electron diffusion and drift contributions balance one another, and the hole contributions do likewise. There is zero net terminal current through an unbiased junction, although carriers still undergo thermal motion and microscopic transfers.
Problem
For p on the left and n on the right, a conduction electron diffuses left across the junction. A minority electron near the p-side is swept right by the depletion field. State both conventional-current directions.
- 1.The diffusing electron moves left, so its negative charge contributes rightward conventional diffusion current.
- 2.The minority electron drifts right, so its conventional-current contribution is leftward. A hole swept left by the field also contributes leftward drift current.
- 3.Thus electron drift and electron diffusion oppose each other as both physical motions and conventional currents. The equilibrium cancellation is a signed current balance, not an absence of moving electrons.
The barrier is a potential-energy obstacle
The charge separation also produces a potential difference. Because electric field points from n to p, electrostatic potential is higher on the n-side. Let the p-side bulk potential be the reference zero; the n-side bulk potential is then +V₀. The potential rises left to right through the junction. This is consistent with the relation that electric field points toward decreasing potential.
An electron attempting to diffuse from n to p moves toward lower electric potential, but because its charge is negative its potential energy increases. A hole moving p→n also climbs a positive-charge energy barrier. This is why one must not say that every charge moves spontaneously from higher voltage to lower voltage. Charge sign matters. The barrier restrains the majority diffusion that created it, yielding a self-consistent equilibrium.
Problem
Suppose an illustrative equilibrium junction has V₀ = 0.60 V. Find the potential-energy increase for an electron crossing from n to p and for a hole crossing from p to n.
- 1.For the electron, ΔV = Vp − Vn = −0.60 V and q = −e. Hence ΔU = qΔV = (+0.60)e joules per coulomb-volt combination, or 0.60 eV.
- 2.For the hole, q = +e and ΔV = +0.60 V, so ΔU is also 0.60 eV. In SI units each increase is 0.60 × 1.602 × 10⁻¹⁹ = 9.61 × 10⁻²⁰ J.
- 3.The equal positive costs explain why the field opposes both majority diffusion directions. The number 0.60 V is specified for this example; it is not the universal built-in potential of all silicon junctions.
Why the junction is not a battery
A built-in field does not turn an equilibrium diode into a source that supplies sustained power to an external resistor. Charge redistribution and contact potentials belong to the complete equilibrium system; attaching a voltmeter does not extract an endless useful terminal emf equal to the internal barrier. Without an external energy source there is no steady deliverable current. A battery changes the equilibrium by applying a terminal bias, which alters the junction barrier. That controlled change produces the asymmetric current studied next.
The field direction, potential slope and carrier-energy slope are three descriptions of one junction. Before solving a bias problem, label p and n, locate the fixed charges, draw the field and only then infer particle and current directions. This sequence prevents the common error of reversing an electron arrow merely because conventional current was drawn first.
Quick Quiz
Quiz
What first drives holes from p to n during junction formation?
Holes are more numerous on the p-side, so thermal motion produces net diffusion toward the n-side. The space-charge field builds subsequently and opposes this diffusion.
Which fixed charges remain in the depletion region?
Mobile carrier removal exposes the ionised dopants. Their opposite fixed charges create the depletion field; depletion therefore does not mean charge-free.
For p left and n right, the depletion field points
Positive ionised donors lie on the n-side and negative acceptors on the p-side. Electric field points from the positive space charge toward the negative space charge.
Zero net current in an unbiased equilibrium junction means
Equilibrium balances signed contributions. Nonzero microscopic motion and a built-in field can coexist with zero net terminal current.
If Vn − Vp = 0.50 V, an electron moving n→p gains potential energy
For that displacement ΔV = −0.50 V and q = −e, so qΔV = +0.50 eV. Negative charge reverses the relation between potential and potential energy.
Practice Problems
- Explain in order how a junction produces a depletion field starting from neutral p-type and n-type regions.
- With p left and n right, list the four carrier motions: electron diffusion, hole diffusion, electron drift and hole drift. Give conventional-current directions too.
- In one sign convention diffusion current is +3.0 μA at equilibrium. What is drift current? Does this imply an external 3.0 μA current?
- An illustrative junction has Vn = 0.65 V and Vp = 0.05 V relative to one reference. Find V₀ and the n→p electron barrier energy in joules.
- Why do pressing two semiconductor slabs together and calling the contact a battery each miss an essential part of the junction model?
Electrons diffuse n→p and holes p→n down their concentration gradients. Recombination reduces mobile carriers near the interface. Fixed negative acceptors remain exposed on the p-side and positive donors on the n-side. Their field points n→p and opposes further majority diffusion until drift and diffusion balance.
Key Takeaways
• A junction joins differently doped regions in a suitable continuous crystal. • Diffusion begins because each mobile carrier concentration differs across the boundary. • Depletion leaves fixed negative acceptors on p and fixed positive donors on n. • The depletion field points n→p and opposes majority-carrier diffusion. • Drift and diffusion balance at equilibrium; zero net current does not mean zero motion. • Electrostatic potential is higher on n, but an electron’s potential energy is lower there. • The built-in barrier is not an externally available battery emf.
Finished this lesson? Mark it complete to track your progress.
Loading your progress…