Skip to lesson content

Lesson 1 of 10

Amines · Lesson 1 of 10

Structure, Classification and Nomenclature of Amines

“Understand nitrogen bonding; classify, name and enumerate aliphatic and aromatic amines.”

Learning Objectives

• Explain the pyramidal geometry and the role of nitrogen’s lone pair. • Classify primary, secondary and tertiary amines from connectivity. • Name amines using systematic and common naming conventions. • Enumerate structural amine isomers without counting duplicates.

An amine is more than a nitrogen-containing formula

Ammonia, NH₃, has three N–H bonds and a nonbonding pair of electrons. Replace one hydrogen by an alkyl group R or an aryl group Ar to obtain RNH₂ or ArNH₂. Replacing two or three produces R₂NH and R₃N; nitrogen is typically trivalent in neutral amines. Quaternary ammonium ions R₄N⁺ have four carbon substituents, a formal positive charge and no lone pair, so they are not tertiary amines.

In simple amines the nitrogen has approximately sp³ hybridisation: three orbitals form σ bonds and the fourth contains the lone pair. The positions of the three bonded groups describe a trigonal pyramid rather than a plane. Repulsion involving the lone pair influences bond angles; a roughly 108° C–N–C angle is reported for trimethylamine. Unlike a tetrahedral carbon bearing four bonds, this nitrogen centre may undergo rapid pyramidal inversion.

Amine nitrogen: a trigonal-pyramidal centreNRHHLone pairSchematic perspective; substituents may differ.One bond in planeSolid wedge: toward viewerHashed: away
Three-dimensional interpretation of amine nitrogen— Perspective schematic of an amine nitrogen with one lone pair; not a stereochemical assignment.

Primary, secondary, tertiary, and aryl versus benzyl

Count carbon groups bonded directly to nitrogen, not the total number of carbons in the molecule. CH₃NH₂ is primary (one carbon group, two N–H bonds), (CH₃)₂NH secondary (two groups, one N–H), and (CH₃)₃N tertiary (three groups, no N–H). Both aliphatic and aromatic amines can be primary, secondary or tertiary. A simple amine has identical attached alkyl groups where more than one is present; mixed amines have different groups.

StructureClassReason
CH₃CH₂NH₂Primary aliphaticOne C–N group; two N–H bonds
CH₃NHCH₂CH₃Secondary aliphaticTwo C–N groups; one N–H bond
(CH₃)₃NTertiary aliphaticThree C–N groups; zero N–H
C₆H₅NH₂Primary arylamineNitrogen directly attaches to benzene
C₆H₅CH₂NH₂Primary benzylic amineNitrogen attaches to CH₂, not ring carbon
(CH₃)₄N⁺Quaternary ammonium ionFour substituents; positive nitrogen

Aniline (C₆H₅NH₂) is an arylamine because its nitrogen is bonded directly to the ring. Benzylamine (C₆H₅CH₂NH₂) is not an arylamine: the intervening methylene group makes its nitrogen chemically more like an aliphatic amine. This single bond difference is crucial when comparing basicity, diazotisation and substitution reactions.

Naming a structure from the nitrogen outward

For simple primary amines, select the longest parent carbon chain containing the carbon bonded to –NH₂; use the suffix –amine and number to place it at the lowest relevant position: CH₃CH₂CH₂NH₂ is propan-1-amine, whereas (CH₃)₂CHNH₂ is propan-2-amine. One may also encounter the common names n-propylamine and isopropylamine. If two amino groups occur, use a diamine suffix and retain the e: H₂NCH₂CH₂NH₂ is ethane-1,2-diamine.

In secondary and tertiary amines select a suitable parent attached to nitrogen and describe other nitrogen substituents with N- locants: CH₃NHCH₂CH₃ is N-methylethanamine; (CH₃CH₂)₃N is N,N-diethylethanamine. The locant N is a letter, not a carbon number. Aniline is a retained name for benzenamine; substituents on its ring are numbered from the amino-bearing carbon. Thus p-bromoaniline is 4-bromoaniline, and o-toluidine is 2-methylaniline.

Name and classify four structures

Problem
Identify CH₃NHCH(CH₃)₂, (CH₃)₃CNH₂, C₆H₅NHCH₃ and m-BrC₆H₄NH₂.

  1. 1.CH₃NHCH(CH₃)₂ has methyl and propan-2-yl attached directly to N, with one N–H. It is secondary; the systematic name is N-methylpropan-2-amine.
  2. 2.(CH₃)₃CNH₂ has nitrogen bonded to only one carbon even though that carbon itself bears three methyl groups. It is primary: 2-methylpropan-2-amine.
  3. 3.C₆H₅NHCH₃ has phenyl and methyl on nitrogen, so it is secondary: N-methylaniline.
  4. 4.m-BrC₆H₄NH₂ has one N–aryl bond and two N–H bonds. It is primary: 3-bromoaniline.

Systematically find all eight acyclic C₄H₁₁N isomers

Start with four primary amines from distinct placements of –NH₂ on the four-carbon skeletons; then partition the four carbons among nitrogen substituents as 1+3 or 2+2 (secondary), and 1+1+2 (tertiary). The primary set is butan-1-amine, butan-2-amine, 2-methylpropan-1-amine and 2-methylpropan-2-amine. The secondary set is N-methylpropan-1-amine, N-methylpropan-2-amine and N-ethylethanamine (diethylamine). The tertiary set is N,N-dimethylethanamine. These are eight constitutional isomers; possible stereoisomers of an individual structure are not counted as additional constitutional isomers.

Chain isomerism changes the carbon framework, position isomerism moves the amino group and metamerism redistributes carbon groups around nitrogen in secondary amines. Changes from primary to secondary or tertiary connectivity may also be classified as functional or class isomerism in textbook conventions; state the specific structural change rather than using an ambiguous label alone.

Quick Quiz

Quiz

Quick check

Which structure is a tertiary amine?

Explanation: Triethylamine has three carbon groups directly on N and no N–H bond.

Quick check

Why is amine nitrogen normally pyramidal?

Explanation: Three bonded positions plus a nonbonding pair give a pyramidal bonded geometry.

Quick check

What is the name of CH₃NHCH₂CH₃?

Explanation: Choose ethanamine as parent and mark methyl on nitrogen with N-.

Quick check

Which is an aromatic amine directly bonded to a ring carbon?

Explanation: In aniline, nitrogen is bonded directly to a benzene carbon.

Quick check

How many constitutional isomers of saturated acyclic C₄H₁₁N amines are there?

Explanation: Four primary, three secondary and one tertiary structures give eight.

Practice Problems

Practice Problems
  1. Classify (CH₃)₂NH, C₆H₅CH₂NH₂ and C₆H₅N(CH₃)₂.
  2. Give the systematic name and class of CH₃CH₂NHCH(CH₃)₂.
  3. List all primary amine structures with molecular formula C₄H₁₁N.
  4. Explain why aniline and benzylamine are chemically different despite both being primary.
  5. Write names and classes of all secondary C₄H₁₁N amines.

Count nitrogen-bonded carbon groups. Dimethylamine has two and is secondary; benzylamine has one and is primary; N,N-dimethylaniline has three and is tertiary. Benzylamine is not an arylamine.

Key Takeaways

Key Takeaways

• Neutral amines normally contain three σ bonds to nitrogen and one lone pair. • Primary, secondary and tertiary refer to 1, 2 or 3 carbon substituents on nitrogen. • Quaternary ammonium ions have four substituents and positive charge. • Aniline has a direct aryl–N bond; benzylamine contains an intervening CH₂. • Systematic amine names use the suffix –amine and N- locants for nitrogen substituents. • C₄H₁₁N has eight constitutional amine isomers: four primary, three secondary and one tertiary.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…