Skip to lesson content

Lesson 10 of 10

Amines · Lesson 10 of 10

Chapter Summary and Practice

“Integrate amine structures, synthetic carbon accounting, physical properties, base strength, identification and diazonium reaction planning.”

Learning Objectives

• Classify and name unfamiliar amines using direct N–C connectivity. • Select and justify synthetic routes with correct carbon counts and selectivity. • Predict physical and chemical behaviour from hydrogen bonding, basicity and resonance. • Solve linked aromatic and diazonium transformations without losing positional information. • Explain diagnostic tests and distinguish the main amine classes.

The conceptual map: one lone pair, several kinds of chemistry

Ordinary neutral amines contain an approximately pyramidal nitrogen bonded to one, two or three carbon groups and retaining a lone pair. The attached groups define primary RNH₂, secondary R₂NH and tertiary R₃N classification. Quaternary ammonium ions R₄N⁺ have a fourth substituent and do not have a nitrogen lone pair. When NH₂ bonds directly to benzene it is an arylamine (aniline); an intervening CH₂ makes it benzylamine instead. These structural choices explain almost every major property and reaction in this chapter.

Physical behaviour and the logic of basicity

Primary and secondary amines contain N–H and can both donate and accept hydrogen bonds. Tertiary amines accept hydrogen bonds from water but cannot donate N–H bonds. Increasing nonpolar group size generally decreases aqueous solubility, and amine salts are often more water-soluble. In water, amine basicity is measured by Kb = [BH⁺][OH⁻]/[B], and pKb = −log₁₀Kb; smaller pKb means stronger base.

Alkyl substituents donate electron density inductively, strengthening basicity, but aqueous hydration and sterics modify the sequence. Dimethylamine is more basic than methylamine, which exceeds trimethylamine in the reported aqueous set. Direct lone-pair resonance into the aromatic ring makes aniline relatively weakly basic; benzylamine has an intervening CH₂ and is stronger. Gas-phase trends need not equal aqueous-phase trends.

Choose an amine preparation by the carbon you retain or remove

RouteRepresentative exampleCarbon bookkeeping and limitation
Nitro reductionC₆H₅NO₂ → C₆H₅NH₂Same carbon skeleton
Halide ammonolysisC₂H₅Br → C₂H₅NH₂Same skeleton; successive alkylation can occur
Cyanide plus nitrile reductionC₂H₅Br → C₂H₅CN → C₃H₇NH₂Adds one CN-derived carbon to original halide
Amide LiAlH₄ reductionCH₃CONH₂ → C₂H₅NH₂Carbonyl carbon becomes CH₂
Gabriel synthesis1-Bromopropane → propan-1-amineSelective primary alkylamine; ordinary aryl halides excluded
Hofmann bromamideCH₃CONH₂ → CH₃NH₂One carbonyl carbon is lost

The most common carbon-count mistake is assuming both amide reduction and Hofmann degradation give the same product. They do not. Both start with RCONH₂: LiAlH₄ gives RCH₂NH₂, whereas Br₂/alkali gives RNH₂. A related mistake is treating R–X → R–CN → R–CH₂NH₂ as carbon-neutral relative to the original alkyl halide; cyanide introduces a new carbon.

Use the nitrogen-bound hydrogen count to predict diagnostic reactions

Both primary and secondary amines can be acylated because they have N–H; ordinary tertiary amines cannot form a neutral amide by replacing N–H. Only primary amines give the standard carbylamine test with CHCl₃/alkali. In a Hinsberg-type reaction a primary amine yields a sulphonamide with acidic N–H, making its product alkali-soluble; a secondary amine forms an insoluble N,N-disubstituted sulphonamide; a tertiary amine does not form that product under ordinary conditions.

Primary alkylamines and arylamines react differently with nitrous acid. Aliphatic primary amines form extremely transient diazonium species that release N₂ and often yield alcohols. Aniline gives the comparatively persistent benzenediazonium ion in cold acid (273–278 K). Diazonium reactions either displace –N₂⁺ while releasing nitrogen or retain it as –N=N– in coupling products.

One compact reaction map for aromatic synthesis

From aniline to families of aromatic productsStartReagent / key conditionProductAnilineNaNO₂ + HCl273–278 KAr–N₂⁺ Cl⁻Ar–N₂⁺CuCl, CuBr, CuCNAr–Cl, Ar–Br, Ar–CNAr–N₂⁺KI or HBF₄ then ΔAr–I or Ar–FAr–N₂⁺H₃PO₂ or warm H₂OAr–H or Ar–OHAr–N₂⁺ + phenolControlled azo couplingAr–N=N–C₆H₄–OHEach arrow represents its own reagent choice, not one sequential reaction.
Core aromatic transformations— This is a map of alternatives, not one multi-step sequence.

For aryl halides use Sandmeyer Cu(I) reagents or the corresponding alternatives; KI gives iodide, diazonium tetrafluoroborate on heating gives fluoride, H₃PO₂ gives arene, and warm water gives phenol. Diazonium reaction with activated phenol or aniline gives azo coupling, often at para position. The N=N linkage creates a conjugated chromophore. All diazonium manipulations are understood as controlled chemistry, not casual classroom operations.

Connected worked example: convert aniline to benzyl alcohol

Introduce a new benzylic carbon through cyanide

Problem
Propose a chemically coherent route from C₆H₅NH₂ to C₆H₅CH₂OH.

  1. 1.Convert aniline into benzenediazonium chloride using NaNO₂/HCl at about 273–278 K. The aromatic amino group becomes a better leaving group while preserving ring connectivity.
  2. 2.Use CuCN to substitute diazonium by a nitrile: C₆H₅N₂⁺ → C₆H₅CN + N₂. This step adds the nitrile carbon at the formerly amino-bearing ring position.
  3. 3.Hydrolyse benzonitrile under suitable acidic or basic aqueous conditions to benzoic acid, C₆H₅COOH.
  4. 4.Reduce benzoic acid with LiAlH₄ followed by workup to C₆H₅CH₂OH, benzyl alcohol. The nitrile carbon has become the benzylic CH₂.

Connected worked example: diagnose three different amines

Interpret three tests without memorising colours

Problem
Unknown A produces an alkali-soluble sulphonamide; B produces an insoluble sulphonamide; C does not react with the sulphonyl chloride but forms a salt with acid.

  1. 1.A has a nitrogen-bound H in its sulphonamide and is therefore a primary amine. A should also be carbylamine-positive under the appropriate reaction conditions.
  2. 2.B reacts with sulphonyl chloride but leaves no acidic N–H in the product, identifying a secondary amine.
  3. 3.C forms no ordinary sulphonamide yet can protonate, consistent with a tertiary amine. Tests must be interpreted together, not just by the appearance of a single precipitate.

Avoid common synthesis and conceptual traps

Do not confuse more substituted nitrogen with automatically higher boiling point or greater water solubility. Do not decide basicity from +I effects alone in water. Do not call benzylamine an arylamine; its nitrogen is not conjugated with the ring. Do not use Gabriel phthalimide with unactivated aryl halides. Do not brominate free aniline when only one para bromine is desired: protect its amino group. Do not predict ordinary ortho/para nitration for aniline without checking its protonation state. Finally, azo coupling retains N=N, whereas Sandmeyer-type replacement releases N₂.

Quick Quiz

Quiz

Quick check

Which reaction converts benzamide into aniline?

Explanation: Hofmann rearrangement removes the benzamide carbonyl carbon.

Quick check

Which species is a weak aqueous base because its nitrogen lone pair is conjugated with benzene?

Explanation: Direct N–phenyl conjugation reduces availability of the nitrogen lone pair.

Quick check

Which compound gives an alkali-soluble sulphonamide after Hinsberg-type treatment?

Explanation: The primary-derived sulphonamide retains acidic N–H.

Quick check

Which product results from azo coupling of benzenediazonium salt with phenol?

Explanation: The diazonium N=N linkage joins the two activated aromatic systems.

Quick check

Which sequence introduces one extra carbon while making a primary amine from an alkyl halide?

Explanation: CN supplies the extra carbon before the nitrile is reduced to CH₂NH₂.

Practice Problems

Practice Problems
  1. 9.1-style naming: name and classify (CH₃)₂CHNH₂, CH₃NHCH(CH₃)₂ and C₆H₅NHCH₃.
  2. 9.2-style identification: distinguish ethylamine from aniline using controlled nitrous-acid chemistry.
  3. 9.3-style reasoning: why can aniline produce a meta nitro product despite its ortho/para-directing amino group?
  4. 9.4-style order: rank aniline, NH₃, ethanamine and diethylamine by aqueous basicity and explain.
  5. 9.5-style conversion: convert ethanoic acid into methanamine and separately into propanoic acid.
  6. 9.6-style test: identify a tertiary amine using sulphonyl chloride and acid/base behaviour.
  7. 9.7-style named reaction: describe Gabriel synthesis and why it does not yield aniline from chlorobenzene.
  8. 9.8-style conversion: convert nitrobenzene into benzoic acid.
  9. 9.9(i)-style sequence: identify A, B and C in C₂H₅I →[NaCN] A →[partial hydrolysis] B →[Br₂/NaOH] C.
  10. 9.9(ii)-style sequence: identify products from benzenediazonium chloride →[CuCN] A →[acidic hydrolysis] B →[NH₃, heat] C.
  11. 9.9(iii)-style sequence: bromoethane →[KCN] A →[LiAlH₄] B →[HNO₂ in water] C.
  12. 9.9(iv–vi)-style aromatic sequence: explain outcomes of nitrobenzene reduction followed by cold nitrous acid and either water or phenol.
  13. 9.10-style puzzle: an aromatic compound A gives amide B with aqueous ammonia/heating; B gives C₆H₇N with Br₂/KOH. Identify a consistent A, B and C.
  14. 9.11-style products: give outcomes of aniline with Br₂ water, aniline with acetic anhydride and diazonium chloride with H₃PO₂.
  15. 9.12–9.13-style comparison: explain Gabriel’s aryl limitation and reactions of primary amines with HNO₂.
  16. 9.14-style explanations: why are amines less acidic than alcohols, why do primary amines boil higher than tertiary isomers and why are alkylamines more basic than arylamines?
  17. Distinguish all five representative pairs of amines by chemical behaviour.
  18. Explain seven characteristic chemical observations about amines and diazonium salts.
  19. Compare amine basicity in the aqueous and gas phases, including substituted aromatic amines.
  20. Design four carbon-count conversions: hexanenitrile to pentan-1-amine, methanol to ethanoic acid, ethanamine to methanamine, and methanamine to ethanamine.
  21. Complete two more preparative conversions: nitromethane to dimethylamine, and propanoic acid to ethanoic acid.
  22. Plan aromatic conversions: benzene to meta-bromophenol, benzoic acid to aniline, and aniline to 2,4,6-tribromofluorobenzene.
  23. Plan aromatic conversions: benzyl chloride to 2-phenylethanamine, chlorobenzene to para-chloroaniline, and aniline to para-bromoaniline.
  24. Plan aromatic conversions: benzamide to toluene and aniline to benzyl alcohol.
  25. Complete two diazonium-based three-step sequences from ethanoic acid and nitrobenzene.
  26. Account for seven characteristic reactions of aniline and benzenediazonium salts.
  27. Name and classify the remaining representative amines, including a tert-alkylamine and a bromoaniline.

(CH₃)₂CHNH₂ is propan-2-amine, primary because N has one carbon group. CH₃NHCH(CH₃)₂ is N-methylpropan-2-amine, secondary because N has two carbon groups. C₆H₅NHCH₃ is N-methylaniline, secondary aromatic because N is bonded directly to phenyl and methyl.

Key Takeaways

Key Takeaways

• Amine structure and classification depend on carbon groups bonded directly to nitrogen. • Synthesis planning requires tracking whether a carbon is retained, added by cyanide or removed by Hofmann degradation. • Hydrogen bonding explains boiling-point patterns and contributes to aqueous solubility. • Aqueous basicity is best compared with Kb/pKb and attention to resonance, solvation and induction. • Carbylamine and Hinsberg-type tests distinguish primary, secondary and tertiary amine behaviour. • Protection of aniline controls otherwise excessive aromatic substitution. • Cold diazonium chemistry enables halogen, nitrile, hydroxyl, nitro and hydrogen replacements. • Azo coupling retains N=N and produces conjugated, often coloured molecules. • Multi-step transformations must preserve aromatic substitution positions and account for all carbon atoms.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…