Skip to lesson content

Lesson 2 of 10

Amines · Lesson 2 of 10

Preparing Amines: Reduction and Ammonolysis

“Compare nitro reduction, halide ammonolysis, nitrile reduction and amide reduction with carbon-count and selectivity reasoning.”

Learning Objectives

• Choose a preparation based on starting functional group and target carbon skeleton. • Explain why ammonolysis can overalkylate and how ammonia excess affects the outcome. • Track carbon-count changes through cyanide and amide reductions. • Construct correct reagent sequences for representative aromatic and aliphatic amines.

Synthesis starts by identifying what must change

A primary amine can be formed by reducing a nitrogen-containing precursor or by substituting nitrogen for a leaving group. Choosing the starting material requires distinguishing bond replacement from chain extension. Nitro reduction conserves the carbon skeleton; reduction of a nitrile gives the same carbon count as the nitrile but one more carbon than the alkyl halide from which cyanide originally replaced halogen; direct reduction of an amide retains the carbonyl carbon as a methylene.

Reducing nitro groups to amino groups

Catalytic hydrogenation of R–NO₂ or Ar–NO₂ uses H₂ with finely divided Ni, Pd or Pt; reductions with iron and hydrochloric acid are also used. A balanced overall aromatic example is C₆H₅NO₂ + 3H₂ → C₆H₅NH₂ + 2H₂O (catalyst). Aromatic nitro compounds therefore offer a practical route from nitrobenzene to aniline. In acidic metal reductions the amine may initially form an ammonium salt; base treatment can liberate the free amine.

Reduction adds hydrogen and removes oxygen as water; it does not change which carbon atom carries the nitrogen. Nitroethane, CH₃CH₂NO₂, is reduced to ethanamine, CH₃CH₂NH₂, not propanamine. In the iron/HCl approach iron salts can hydrolyse and regenerate some acid; a catalyst or acid concentration should not be invented when not specified.

Ammonolysis of alkyl halides

In ethanolic ammonia, an alkyl or benzylic halide R–X is attacked by a nucleophilic NH₃ molecule. After a substitution and proton transfer, RNH₂ forms; a useful overall stoichiometric representation is R–X + 2NH₃ → RNH₂ + NH₄X. A sealed-tube condition around 373 K is described for this reaction. In the simple alkyl-halide series the leaving-group trend typically follows RI > RBr > RCl under comparable conditions.

The first amine product still has a lone pair and may attack another alkyl halide to become secondary, then tertiary and finally quaternary ammonium species. Thus ammonolysis is intrinsically prone to mixtures: RNH₂ → R₂NH → R₃N → R₄N⁺, with successive alkylations. A large excess of ammonia favours initial attack by NH₃ and raises the proportion of primary amine, but does not make secondary products impossible.

Predict the products of ammonolysis

Problem
What forms when bromoethane reacts with excess ethanolic ammonia, and why can a secondary amine appear?

  1. 1.NH₃ attacks CH₃CH₂Br at the carbon bearing bromine; bromide leaves. After deprotonation, the principal organic product can be CH₃CH₂NH₂, ethanamine.
  2. 2.An ethanamine molecule can also attack another bromoethane molecule to form (CH₃CH₂)₂NH (diethylamine). Continued alkylation gives triethylamine and, ultimately, tetraethylammonium bromide.
  3. 3.Keeping ammonia in large excess reduces repeated alkylation because collisions with ammonia are favoured, but it does not guarantee one exclusive product.

Reduction of nitriles: where does the extra carbon come from?

A nitrile contains R–C≡N. Lithium aluminium hydride under anhydrous conditions followed by hydrolytic workup, or catalytic hydrogenation, converts the triple bond into R–CH₂–NH₂. For instance, CH₃CN → CH₃CH₂NH₂. When preparing this from an alkyl halide, cyanide displaces X first: R–X → R–C≡N → R–CH₂–NH₂. The carbon of the incoming CN group becomes the CH₂ carbon bearing NH₂; that is the origin of the one-carbon extension relative to R–X.

Use a reagent providing carbon-bound cyanide (such as ionic KCN in suitable substitution conditions), not AgCN indiscriminately: a different bond-forming mode can produce isocyanides. This reaction works best with suitable substrates for nucleophilic substitution, whereas aryl halides such as chlorobenzene do not generally undergo an ordinary SN2 replacement by cyanide.

Reduction of amides conserves the carbon framework

LiAlH₄ reduces an amide R–CONH₂ to R–CH₂NH₂ following appropriate workup. Thus CH₃CONH₂ (ethanamide) gives CH₃CH₂NH₂ (ethanamine); the carbonyl carbon is retained and becomes the amine-bearing methylene. N-substituted amides yield correspondingly substituted amines, with appropriate product structure depending on the substituents. This is different from the Hofmann bromamide reaction, which removes the carbonyl carbon and gives an amine with one fewer carbon.

Amine preparation: trace the carbon skeletonStartReagent / key conditionProductC₆H₅NO₂H₂ / Ni; reductionC₆H₅NH₂CH₃CH₂BrExcess ethanolic NH₃CH₃CH₂NH₂CH₃CH₂BrKCN, then LiAlH₄+ workupCH₃CH₂CH₂NH₂CH₃CONH₂LiAlH₄; then workupCH₃CH₂NH₂Schematic transformations; positions and conditions are stated in the lesson.
Four routes compared by carbon-count outcome— Carbon skeleton changes only where explicitly shown.
Extend an alkyl halide by one carbon

Problem
Convert benzyl chloride, C₆H₅CH₂Cl, into 2-phenylethanamine, C₆H₅CH₂CH₂NH₂.

  1. 1.Choose nucleophilic replacement by CN⁻, which supplies one additional carbon: C₆H₅CH₂Cl + KCN → C₆H₅CH₂CN + KCl. The product is phenylacetonitrile.
  2. 2.Reduce the nitrile with LiAlH₄ followed by workup: C₆H₅CH₂CN → C₆H₅CH₂CH₂NH₂.
  3. 3.The benzyl carbon remains next to the benzene ring; the nitrile carbon becomes the terminal CH₂NH₂. Direct ammonolysis would give benzylamine, which is one carbon shorter.

Quick Quiz

Quiz

Quick check

Which method usually preserves the carbon skeleton while changing ArNO₂ to ArNH₂?

Explanation: Hydrogenation or metal-acid reduction removes nitro oxygens without removing carbon.

Quick check

What leads to a mixture during ammonolysis?

Explanation: RNH₂ is itself nucleophilic and may successively react with more alkyl halide.

Quick check

Which route converts CH₃CH₂Br into propan-1-amine?

Explanation: Cyanide adds one carbon to give propanenitrile; reduction makes propan-1-amine.

Quick check

What is the product of complete LiAlH₄ reduction of CH₃CONH₂ after workup?

Explanation: The carbonyl carbon of ethanamide becomes the methylene attached to nitrogen.

Quick check

What is the principal product from nitrobenzene with H₂/Ni?

Explanation: Nitrobenzene is reduced to aminobenzene; the aromatic ring remains intact.

Practice Problems

Practice Problems
  1. Plan two methods to prepare ethanamine, one from an alkyl halide and one from a nitrile.
  2. Convert chloromethane into ethanamine with no direct C–C alkylation.
  3. Explain why direct ammonolysis is not a reliable way to obtain pure diethylamine.
  4. Give a balanced equation for catalytic reduction of nitrobenzene.
  5. Compare LiAlH₄ reduction of ethanamide with the transformation of benzyl chloride via cyanide.

Direct: bromoethane + excess ethanolic NH₃ gives ethanamine after proton transfer, though further alkylation can occur. Nitrile: CH₃CN + LiAlH₄ followed by workup gives CH₃CH₂NH₂. The nitrile route retains the nitrile carbon as CH₂.

Key Takeaways

Key Takeaways

• Nitro reduction turns –NO₂ into –NH₂ without adding carbon atoms. • Alkyl halide ammonolysis is nucleophilic substitution and can produce several degrees of amines. • Large excess of NH₃ favours primary amines in ammonolysis but does not guarantee purity. • A nitrile R–CN is reduced to R–CH₂NH₂. • Cyanide substitution followed by nitrile reduction lengthens an alkyl-halide carbon skeleton by one. • LiAlH₄ reduction of amides retains the carbonyl carbon as CH₂.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…