Skip to lesson content

Lesson 3 of 10

Amines · Lesson 3 of 10

Selective Synthesis of Primary Amines

“Use Gabriel synthesis and Hofmann bromamide degradation with correct selectivity, limitations and carbon bookkeeping.”

Learning Objectives

• Explain the selectivity of the Gabriel phthalimide route. • Predict which halides react with a phthalimide anion and which do not. • Balance the Hofmann bromamide transformation and track carbon loss. • Plan multi-step conversions between carboxylic acids, amides and primary amines.

Why are specialised primary-amine syntheses useful?

An alkyl halide attacked by ammonia can yield a primary amine, but that primary amine may undergo additional alkylations. A synthesis that controls where nitrogen bonds to carbon can avoid this mixture. Gabriel phthalimide synthesis provides a protected nitrogen nucleophile that can be alkylated once under appropriate conditions. A different transformation, Hofmann bromamide degradation, begins with an amide and produces a primary amine containing one carbon less.

Gabriel phthalimide synthesis: controlled N-alkylation

Phthalimide contains an imide N–H between two carbonyl groups. Ethanol-based KOH treatment converts it into a potassium phthalimide salt; the nitrogen anion is stabilised by the neighbouring carbonyls. This nucleophile attacks a suitable alkyl halide at carbon by displacement of its leaving group, giving N-alkylphthalimide. Hydrolysis of that N-alkyl imide liberates the corresponding primary alkylamine.

The nitrogen of phthalimide is held in a framework that prevents ordinary multiple alkylation during the initial substitution. Hydrolysis breaks the imide-derived bonds to release RNH₂ and phthalate-derived products. The method works best where the carbon bearing halogen can undergo nucleophilic substitution; an unsubstituted aryl halide such as chlorobenzene does not undergo ordinary SN2 substitution with this anion. Therefore Gabriel synthesis is not a general preparation of aniline from aryl halides.

Choose a selective route to butan-1-amine

Problem
Prepare CH₃CH₂CH₂CH₂NH₂ from 1-bromobutane without using excess ammonia.

  1. 1.Treat phthalimide with ethanolic KOH to obtain potassium phthalimide. Its nucleophilic nitrogen is available for substitution.
  2. 2.React the potassium salt with CH₃CH₂CH₂CH₂Br to make N-butylphthalimide by displacement of Br⁻ at a primary alkyl carbon.
  3. 3.Hydrolyse the N-alkylphthalimide under established appropriate conditions to give CH₃CH₂CH₂CH₂NH₂. One N-substituent was installed, avoiding sequential production of di- and tributylamines.

Hofmann bromamide degradation: shortening an amide by one carbon

A primary carboxamide R–CONH₂ is treated with Br₂ and aqueous NaOH or KOH. In the Hofmann degradation, an N-bromoamide forms, rearranges through migration of R from the carbonyl carbon to nitrogen, and generates an isocyanate R–N=C=O. Hydrolysis of the isocyanate yields a carbamic acid derivative that releases CO₂ or carbonate under basic conditions, leaving RNH₂. The migrating group keeps its bond pattern: the carbon originally in C=O is removed.

An overall representative balanced reaction is RCONH₂ + Br₂ + 4NaOH → RNH₂ + Na₂CO₃ + 2NaBr + 2H₂O. The molecular carbon bookkeeping is decisive: the amide has one carbon more than the amine it produces. Butanamide, CH₃CH₂CH₂CONH₂, forms propan-1-amine; benzamide, C₆H₅CONH₂, forms aniline, C₆H₅NH₂. The latter is an arylamine even though the starting amide had an additional carbonyl carbon.

Two selective routes to primary aminesStartReagent / key conditionProductPrimary R–XPotassium phthalimidethen hydrolysisR–NH₂CH₃CH₂CH₂CONH₂Br₂, aqueous NaOHHofmann rearrangementCH₃CH₂CH₂NH₂C₆H₅CONH₂Br₂ / NaOHC₆H₅NH₂Gabriel preserves R; Hofmann discards the amide carbonyl carbon.
Carbon-count comparison of selective routes— Flow chart distinguishes substitution from degradation.

Planning conversions with acids and amides

An acid RCOOH can be converted to a primary amide RCONH₂ through an appropriate acid derivative or dehydration strategy; the amide can then undergo Hofmann degradation to RNH₂. In contrast, LiAlH₄ reduction of that amide produces RCH₂NH₂. These two choices make a useful synthesis switch: starting from ethanoic acid, the Hofmann path gives methanamine, whereas amide reduction gives ethanamine.

One starting acid, two distinct amines

Problem
Which outcomes result from converting CH₃COOH into CH₃CONH₂ and then selecting Br₂/NaOH or LiAlH₄?

  1. 1.Prepare ethanamide, CH₃CONH₂, from the acid by an established amidation route.
  2. 2.With Br₂/NaOH, Hofmann rearrangement removes the carbonyl carbon: CH₃CONH₂ → CH₃NH₂, methanamine.
  3. 3.With LiAlH₄ and hydrolytic workup, carbonyl oxygen is reduced and the carbon stays: CH₃CONH₂ → CH₃CH₂NH₂, ethanamine.

Quick Quiz

Quiz

Quick check

Which product follows Hofmann degradation of benzamide?

Explanation: The amide carbonyl carbon is lost; phenyl becomes directly attached to NH₂.

Quick check

Which substrate is unsuitable for a standard Gabriel SN2 reaction?

Explanation: The carbon–halogen bond of chlorobenzene is on an sp² aromatic carbon; ordinary SN2 attack is not feasible.

Quick check

Which reagents convert butanamide into propan-1-amine?

Explanation: Hofmann bromamide degradation removes the amide carbonyl carbon.

Quick check

What is the principal advantage of Gabriel synthesis?

Explanation: Nitrogen is alkylated while protected in the phthalimide framework.

Quick check

What gives ethanamine when ethanamide is treated with LiAlH₄ and workup?

Explanation: Reduction retains the carbonyl carbon as CH₂; degradation would yield methanamine.

Practice Problems

Practice Problems
  1. Give the starting amide for preparing propan-1-amine by Hofmann degradation.
  2. Convert benzoic acid into aniline through an amide intermediate.
  3. Why does Gabriel synthesis fail for chlorobenzene but work for 1-bromopropane?
  4. Balance the Hofmann reaction for CH₃CONH₂ using NaOH and Br₂.
  5. Compare Gabriel synthesis with ammonolysis of 1-bromobutane.

The target contains three carbons; the corresponding amide must contain four. Choose butanamide, CH₃CH₂CH₂CONH₂. Br₂/aqueous NaOH produces CH₃CH₂CH₂NH₂ and carbonate from the former carbonyl carbon.

Key Takeaways

Key Takeaways

• Gabriel synthesis uses a phthalimide nitrogen nucleophile and hydrolysis to make primary alkylamines. • Ordinary Gabriel substitution does not convert aryl halides into aromatic primary amines. • Hofmann bromamide degradation converts RCONH₂ into RNH₂ using Br₂ and base. • The carbonyl carbon of the amide is removed during Hofmann degradation. • Benzamide gives aniline under Hofmann conditions, but benzylamine under LiAlH₄ reduction. • Choosing between degradation and reduction changes the carbon count of the product.

Finished this lesson? Mark it complete to track your progress.

Loading your progress…